| RHINO 7 - PARAMETRIC MODELING | Loft + Contour

CNC Cut List ( Fabrication ) - Rhino + Grasshopper Video Link:
• | CNC Cut List ( Fabri...
3D MODEL LINK:
www.shopier.com/ShowProductNe...
STORE LINK:
www.shopier.com/ShowProductNe...
İstanbul Medipol University | Interior Architecture
İstanbul Medipol Üniversitesi | İç Mimarlık
İstanbul | Turkey
Mail: [e-mail]
Instagram Hesabı:
/ icmimaryakup
Instagram Kişisel:
/ yakupkaarer
Rhino architecture, Rhino tutorials architecture, Rhino 7 SubD, Rhino 7 tutorial for beginners, architecture students, architecture tutorials, Rhino for architects, Rhinoceros 3D tutorial, Grasshopper 3D tutorial, Rhino Grasshopper, Grasshopper architecture, Parametric modeling, Grasshopper 3D course, Rhino dersleri, Rhino mimari modelleme

[@alancooke9357]

Amazing work with Rhino without Grasshopper. Great process is demonstrated.

[@ketansingh4881]

really great video !! thanx a lot for helping me out

[@yakupkaraer]

I really appreciate your kind words. Thank you.🙌😊

[@Milaenily]

Thanks to this video I learned what record history does :D

[@yakupkaraer]

hahaha evet, güzel bir özellik aslında 😊

[@Arya-td5yl]

Kindly add subtitles about the steps and commands. It'll be easier to understand the workflow.

[@yakupkaraer]

Thank you for your comment. Subtitles will be added. 😊

[@alalalus7692]

Still no subtitles@@yakupkaraer

[@Faqiens]

Nice Vid !

[@yakupkaraer]

Thank you 😊

[@yosofya]

Thanks you for the great tut. I was wondering if you can show us how to lay them flat ( Nesting ) later on and maybe numbering the pieces to get them ready for CNC production.

[@DJ-ll2ye]

each section needs to be aligned to 1 plane. if each part has a lot of draft, make sure the side with the most surface area sits on the plane so you can run a ball nose contour path around it. Align a face of the body to the plane you want so it sits flat

[@yakupkaraer]

Check out the video where I prepare the cutting list from grasshopper.🙌🙌 Link: kzbin.info/www/bejne/Y2q3eXybiZWNeq8&ab_channel=YakupKaraer

[@yosofya]

Appreciate your Response and Support. I have watched it, looks exactly what i was looking for. I hope your next videos will be with voice recording and more explanations. that would be awesome. thanks @@yakupkaraer

[@somiaagoush2905]

thank you ! but how did you close the right and left with the surface after extruding the lines?

[@yakupkaraer]

With the cap command. I did it at 6:07. Did I understand the problem correctly?

[@shamimvahdat6232]

Can you explain more please?

[@alanemoraesdeoliveira]

Hello! At 3:43 when I extruded the curves, the surfaces haven't created, just the edges are looking. Did I wrong thing?

[@yakupkaraer]

After entering the "ExtrudeCrv" command, the "Solid" option in the command bar above should be set to "Yes." 😊🙏🏻

[@eliftk4201]

selam, bu yanda loft ayarlarını düzenlediğiniz seçeneklerin çıktığı bilgisayar simgeli arayüz bende bulunmuyor? atrı bir eklenti mi eklemeliyim? nasıl açabilirim? teşekkürler.

[@yakupkaraer]

O kısıma sağ tıklayın. Display diye çıkacaktır. Display'i aktif edin olacaktır. Sorunuzu doğru anladıysam..😊

[@eliftk4201]

@@yakupkaraer teşekkürler :)

[@maiabdelsalam22]

Hi, how do you select the isocurves and move them then the loft changes automatically ?

[@yakupkaraer]

Activate record history before loft. If you look at 2.02 minutes. 😊Then click surface. Then click f10. 👍

[@MR.credent1al]

@@yakupkaraer It worked

[@casaproductoramejia]

​@@yakupkaraer THANK U! I had the same question

[@eliir5720]

thank you same question @@yakupkaraer

[@omarikbal7479]

great video. Now , if we were to make this. How would we get the sections for each contour?

[@yakupkaraer]

The easy way is to do it from Grasshopper. But if you don't know Grasshopper, you need to extract from Rhino one by one.🙏🏻🙏🏻

[@yakupkaraer]

Nice question 😊😊

[@susurrosjoe6817]

​@@yakupkaraerHow It would be on Grasshopper? I'm very interested cause maybe It could apply to pollar arrays too. Thx very much.

[@yakupkaraer]

Check out the video where I prepare the cutting list from grasshopper.🙌🙌 Link: kzbin.info/www/bejne/Y2q3eXybiZWNeq8&ab_channel=YakupKaraer

[@vishakhaswami5860]

I can't understand 2:24 min point After clicking on curve u have drag is front side & after that what u did to make a curve bench plz tell me..

[@yakupkaraer]

Open Record History. Select the lines and enter the loft command. The lines will slide. 🙏🏻🙏🏻

[@marabelsito4270]

can u explain that part in a different way? it still doesn't work for me@@yakupkaraer

[@yakupkaraer]

@@marabelsito4270 Keep only the lines. Enable the Record History option below. Select all the lines. Enter the 'Loft' command. After changing the positions of the lines, the object's position should change instantly. -- Did it work for you? -- 🙌

[@ahmedakkouche7431]

Thank you so much ❤. But how i can export cutting template of this kind of shapes ?

[@yakupkaraer]

There are fabrication videos related to Grasshopper available on KZbin. I'll also have a project soon. But unfortunately, it requires using Grasshopper. 🙌

[@Romkavers]

Nice. How much cost the Software?

[@yakupkaraer]

You can look at this link. Link: www.rhino3d.com/en/sales/europe/Turkey/all/

[@T4M3R4K]

bRAVO .. ,.

[@user-wy1du8ed9u]

JK,

[@ahmetnurikok5674]

Bir de anlatım yapsaydın daha güzel olurdu. Teşekkürler.

[@yakupkaraer]

Global'e izlenmesi için anlatım yapmıyorum. Biraz Rhino bilgisi olanlar için aslında videolar. Teşekkürler.

[@ahmetnurikok5674]

@@yakupkaraer öğrenmeye devam o zaman. Teşekkür ederim.

[@victorjasa]

Good idea. Nicely done… never the less The worst music ever

[@yakupkaraer]

Thank you for your comment. The music is subject to copyright issues, which is why finding good royalty-free music can be difficult. 🙏🏻🙏🏻

[@rooferspb]

А чё так медленно всё делал? Надо было бы побыстрее, чтоб ещё больше непонятно было. Мне же так хочется постоянно перематывать назад и смотреть со скоростью 0.5

[@yakupkaraer]

Thank you for your comment. I'll make a faster version of it in a video for you as soon as possible.🙏🏻🙏🏻

[@rooferspb]

@@yakupkaraer thanks