Rhino Grasshopper: Stairs Along Curves (Beginner)

  Рет қаралды 12,453

Parametric CAD

Parametric CAD

Күн бұрын

Пікірлер: 20
@YTP0001
@YTP0001 2 жыл бұрын
best tutorial for parametric spiral STAIRS on yt (for the rail i used other, cause u didnt build it xd) ! thanks a lot - helped me to achieve my m.sc!
@ShaneInHDProductionsOfficialYT
@ShaneInHDProductionsOfficialYT 3 жыл бұрын
Easy to follow, subscribing!
@_Solace
@_Solace 2 жыл бұрын
Heyy thanks for this tutorial. But I got an error on the offset right after shatter it says: "Offset plane must be provided if the curve is not planar itself". Any idea what to do? Thanks.
@Lauren-cs2ok
@Lauren-cs2ok 2 жыл бұрын
I go this too, using a spiral for the original curve
@NickDrian
@NickDrian 10 ай бұрын
oops, just saw this. Use a planar curve (flat / 2d). the elevation is added in the grasshopper script, the curve must be flat for the stairs to be flat. It is possible to make this work with a non planar curve, by providing an xy plane node to the plane input, but I dont know why you would use a non planan curve?
@zaramoonen5734
@zaramoonen5734 Жыл бұрын
Would it be possible to add a thickness to the entirety of the stairs? Really great tutorial❤
@maelleturgeon8979
@maelleturgeon8979 3 жыл бұрын
Hello there, really helpful tutorial, but what would be the alternative to add a landing let's say every 10 steps (the landing still following the curve). Thank you !
@NickDrian
@NickDrian 3 жыл бұрын
After dividing the curve, you can delete (cull) some of the output parameters in the middle of the list. This way, you retain an undivided section in the middle of the flight of stairs. Hope this is helpful!
@mohamedhassan9183
@mohamedhassan9183 2 жыл бұрын
how do i make the inputs can you please explain
@erenbıyık-h1h
@erenbıyık-h1h Жыл бұрын
Can the hight defined by the curve? I have a curve projected on a slope. I want to create stairs with that curve ?
@NickDrian
@NickDrian Жыл бұрын
yea, you could take the curve, divide it into points, and use the tangent at those points to create the stairs. If you take the tangent and zero out the z coordinate and rotate 90 decrees around the z axis, you will have a vector. you can use the point and the vector to create a line that is the edge of a stair. good luck
@rfbenbrook
@rfbenbrook 10 ай бұрын
In the lofting the offset crvs step, mine will not allow me to have two wires entering the curves portion of the loft despite following your steps exactly
@NickDrian
@NickDrian 10 ай бұрын
hold shift for multiple wires
@betulbilgesebik4480
@betulbilgesebik4480 9 ай бұрын
@@NickDrian god bless you
@scarletweidig2462
@scarletweidig2462 2 жыл бұрын
hello, what if i need the curve to project on the other side? It is projecting on the right but I need it to be one the left side. Is there anything I need to add?
@NickDrian
@NickDrian 2 жыл бұрын
Try inputing a negative number for the width of the staircase.
@scarletweidig2462
@scarletweidig2462 2 жыл бұрын
@@NickDrian thanks, and also, I can’t connect both the offset and the shatter to the loft. I’m doing my architecture project and I am dying for this to work
@NickDrian
@NickDrian 2 жыл бұрын
Not sure if the issue, just make sure to do the same grafting and simplifying that I did on the outputs of shatter and offset
@eggpassion
@eggpassion Жыл бұрын
@@scarletweidig2462 im running into the same issue, let me know if you found a solution in the end!
@eggpassion
@eggpassion Жыл бұрын
@@scarletweidig2462 just realised after i commented, hold down shift when you try to connect the second input lol
Rhino Grasshopper: Stair Generating Tutorial (Part 1)
20:01
Parametric CAD
Рет қаралды 14 М.
Rhino Grasshopper Stairs
10:20
Rhino Grasshopper
Рет қаралды 35 М.
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 67 МЛН
IL'HAN - Qalqam | Official Music Video
03:17
Ilhan Ihsanov
Рет қаралды 700 М.
Une nouvelle voiture pour Noël 🥹
00:28
Nicocapone
Рет қаралды 9 МЛН
Curved Stairs from Curve Parametric Architecture and Design
22:08
DCO Parametric
Рет қаралды 1,1 М.
Grasshopper Kangaroo Tutorial
7:07
Rhino Grasshopper
Рет қаралды 8 М.
Parametric Stair (Grasshopper Script)
12:18
Rhino Grasshopper
Рет қаралды 8 М.
Rhino Grasshopper Brick Wall Generation Tutorial (Part 1)
11:11
Parametric CAD
Рет қаралды 7 М.
How to Create a STAIR in Rhino with GRASSHOPPER!
9:01
The Rhino Essentials
Рет қаралды 15 М.
Spiral staircase - Grasshopper
5:42
Kirill Rodin
Рет қаралды 513
Parametric Stairs
18:49
Parametric Online
Рет қаралды 6 М.
Rhino Tutorial : Flow Along Curve
7:31
davttv
Рет қаралды 77 М.
Spiral Staircase - Rhino Basic Architecture Tutorials
28:59
The Adam
Рет қаралды 43 М.
Grasshopper-Spiral Stairs
15:53
Hakan Architecture
Рет қаралды 229
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 67 МЛН