RIB CostX Coffee Break - 2D Auto-Revisioning

[@yohanj25]

Hi, thanks for this video! I have a small problem when uploading the revised drawings-they do not match the original scale (the revised drawing is smaller than the initial drawing). Even using the same scale does not fix this issue. Could you suggest a solution to overcome this problem?

[@RIBCostX]

Hi @yohanj25 - you can try resetting the scale when the new drawing comes in using this tool: Under "Drawings" tab > select "Reset Calibration" A step by step guide would be: 1. Create a new revision 2. Promote the original drawing to the new one. 3. When it's imported select the scale at point of import OR 4. Alternatively, you can import it, check what the scale is from the drawing notes and then go to your drawing properties and amend the scale there. 5. Equally, once your new drawing is imported, you click the Reset Calibration button as demonstrated above and then either select the calibration of X or Y axis and calibrate your drawing 6. This will update for the new drawing but the old drawing on the old revision, will remain as initially intended. Hope that helps!