Ricoh Aficio MP 9002sp Dirty Printing l Cleaning of Cleaning Blade

Ricoh Aficio MP 9002sp dirty printout
solution/s:
1. check the glass, fuser hot roller and the drum
2. remove the development unit and then the drum unit
3. clean the drum unit and the cleaning/wiper blade with only soft, clean, dry cloth.
Don't forget to like and subscribe. Thank you.
For any help or assistance, you may send your concern at martealolor@gmail com
#Ricoh9002 #dirtyprinting

[@Edmilson2806]

Congratulations, great explanation!!!!🙏👏👏👏

[@macor285]

Thank you! 😃

[@clipartservice2085]

Hi I always follow you and I am interested in your videos, kindly I have a problem with the Ricoh mp9002sp practically I have to replace these spare parts B0652620; B1402622; B2472611; B1402675, THEY ARE ALL PART OF THE By-Pass GROUP, the paper always jams there and surely I have to change these pieces, I would like to know if you have a video on how it can be done or if you have a technical book where I can see the whole disassembly, thank you.

[@macor285]

You can download the service manual in manualslib.com.

[@dahmanus2002]

there are two cleaning blades to change not to clean, if not, the copier will make the same issue after 1000 sheets, and it's a double job.

[@macor285]

Thanks...

[@ltecsystemsltd42]

The blade at the bottom of the drum what blade is that?

[@macor285]

Cleaning blade

[@clipartservice2085]

I can't send you the video, how can I get it to you?

[@macor285]

for paper jam, please watch kzbin.info/www/bejne/n3_WanWXgrmooZY...clean the rollers and sensors or replace paper feed rollers.

[@clipartservice2085]

@@macor285 Yes I saw the video, up to this point I got there, I cleaned by blowing all the paper plugs with air, but the paper still jams in the place I indicated. I sent you an email to ask where were the sensors that need to be cleaned as you indicated. Could you kindly point them out to me thanks

[@muhammadishfaq8211]

wow so sweet💋💋💋💋

[@muhammadhjalias6225]

Good

[@macor285]

Thank you.

[@clipartservice2085]

Hi dear I always follow you in your videos, I have a problem on my Ricoh mp9002sp, basically I always have the paper that jams and does not go beyond section C2, sometimes it works and sometimes it doesn't work and stays that way for a long time, any throw sheet jams it. I made a little movie I hope you can see it to tell me what problem it may have. I anticipate that I have taken everything apart and there are no pieces of paper or anything else that can interfere in the passage of the paper. There are those who tell me that I have to replace the MIALER (or miler) there are those who say that I have to replace the Paper Feed Motor. Hope you can tell me what problem i may have in the car.Thank you

[@macor285]

Clean the paper path sensors and pick up rollers. Try to use paper tray 1, then observe...tray 2 then observe and so on..Good luck.

[@mohamedelbouachri1833]

A #