Ricoh SP112 - Push The Toner Beyond Its Limits

[@LeZouave]

This is incredible, it worked like a charm. I went to a shop to fill the toner and there was little toner left so the sensor is accurate (even if I printed 298 pages out of the 500 announced). But now I can go to a shop, fill the toner and don't pay for a reset chip. I also have a sp 211 and the service mode hot key is nowhere to be found. Good job finding the service mode combo (if you have the combo for sp 211...)

[@ninjafpv449]

Thank you! Needed to print an important document and had no time to order a new toner cartridge, found your video and it literally saved my day!

[@popszegecs]

A very big "thank you" for you! My "startup" toner has ended to work after 231 pages, but with your trick, I can use it again! Five stars for you!

[@Kungstrollet]

My Ricoh toner stopped working after a total of about 50 pages (I haven't used it in 2 years). You're an ace. Thank you very much!

[@margruber]

WOW this Video will help me in 2023 !! Danke.

[@ΜάρθαΚιουρτσή]

Thank you thank you !!!!!!!!!!!!!!!!!! I had to buy a new one printer and i decided to buy ricoh sp 112 on 10th of June .My toner was gone in 7 days and It only printed 350 pages!!Now i am happy cause the new one costs 35 euros !!You saves us!!!

[@markwebb3764]

This is the internet at its finest ....THANK YOU SO MUCH ..... you just saved me $80 (Aus) at a time when I really needed that money.

[@Davidow1]

*Holy Sh!t, this actually worked!* I could print 440 pages on my Ricoh 112 before my "default" toner decided that it was time for me to order a new one. I tried this trick and voila, it prints again! I'm yet to see how many extra pages I can print, but it certainly gave me some extra room while I'm waiting for the new cassette to be delivered. *THANK YOU, KIND OP!*

[@tomkot]

Wow that key+mouse combination to open hidden settings was like Hollywood hacking :D Danke!

[@sulanec87]

I can't thank you enough for this wonderful hack. You, Sir, are a legend!

[@awesomeiMike]

Awesome, thanks! I needed to print something today, not time to wait till tomorrow until the new toner arrives!

[@dr.monzermohamed926]

"Exactly like "Hussien Mahmoud said: This is my first comment in youtube at all ,, thank you very very much ,, You safe me

[@maiklangberg9444]

Thanks ...... After 300 Sites was my red LED turn on ........ Now after your Video only the Blue ,,,,, Thank you so much

[@nazanin8000]

I cant believes it!!! It worked. Tnx man you saced my life!!!

[@ВладиславБезбабный]

Огромное тебе спасибо. Дай бог тебе здоровья

[@cmhempireresources1928]

thank you very much, it works...the red indicator was gone & now pushing to the limit! :)

[@maxdragonshide584]

I use SP112 on Win 10. After un-zipping I don't get a UTILITY folder as you say on [ 1:34 ] and that means no setup button. What do I do?

[@kaif4260]

Wow! This fixed my problem. I thought my printer was broken. I was about to buy a new one.

[@lerovinecircolari]

Perfetto! Grazie mille!

[@pietzwart8333]

Super, einfach spitzeThx Yoolan, you made my day.Because tonercartridge for the Sp112 is same as SP100, this trick might probably also work with:Sp100 Sp100Le Sp100Sf Sp100Sue

[@valdemarasvirkietis1927]

Thanks man. I'll Drink one beer for you now :)

[@Darmachakra]

It really worked :) Thank you!

[@101jotaele]

Qué bueno, tío!! REALMENTE ÚTIL. Sin chips ni tonterías...

[@Piettore]

Thank you for sharing this video!

[@MahmoudAbdEl-AzizAhmed]

I really can't thank you enough ... THANK YOU ... THANK YOU ... THANK YOU

[@Yoolan]

Youre welcome.

[@mchlllim]

It's working for me! Thank you so much for this awesome tricks :)

[@bitainfo5582]

Thank you very much my brother

[@danielantoniewicz5964]

You've just saved my life. Thank you

[@ENRIQUE8978]

Gracias funciona perfecto de nuevo, muy bien explicado he tenido que utilizar el traductor automatico de You tube, gracias, gracias....

[@alexd603]

Thanks man, you are a lifesaver

[@AMAL_JOY.]

Thank you sooooooooooo much man u made my day

[@speakpositive7586]

THANK You very much forhelp! :-)

[@Massimo17031]

Many thanks man!!! my sp112 work again

[@gaborpetroczi6372]

Thanks, it worked for me, too! You saved my day. :)

[@martinschonemann264]

nice danke dafür hatt geklappert.

[@MrJlm38]

love you man ! (and i hate those who limitate my supposed 3000 impression at 1200)

[@rockeeter3]

solved the problem "Partly"...as now the paper is totally blacked by extra toner...don't know what to do...please help me out

[@generalmayhem9336]

Awsome! Thank you! Greetings from Sweden. :)

[@CumbrianEscrima]

Yeah, im using a ricoh sp220 nw .. not the same as yours but it was printing fine, no fading when suddenly i got the red light .. i tried your idea and no response to the ctrl shift and double right click .. i guess they disabled it ... its a bit annoying but im more annoyed with ricoh for programming their cartridge to fail when it still has lots of ink ... id complain ... but they would respond anyway

[@chriswilliams528]

This way worked well with my Sp112. May I ask you a question? Do I need to replace the chip when I refill the ink? Thank you for your support.

[@pasipp]

Relevant question, I would like to know too. I quess, this software made it unnecessary..

[@Grammostola]

thank youk, saved me right now

[@hankschrader6607]

Thank you very much it work !!!!

[@MrMaxio201]

Thank you very much! Now the printer works very good.

[@nunobraganca5159]

Thanks, you save my day!!!

[@Tandemdrachen]

Thank you! Keep up the good work!!!

[@Sascha_Miller]

DUDE you saved me BIG TIME !

[@aidand123]

thanks so much - worked a treat !

[@fuzexi]

Great, but unfortunately it doesn’t work for the 110, because it looks for drivers for the 112. I had first installed the Smart Organiser for the 110, but it doesn’t have the des mode option...

[@VietAnhArs]

thank you so much you did the best job in the world

[@ShawnKirk007]

Ricoh SP 311DNw. I have Smart Organizer Monitor. However, CTRL + Shift + Double-Right Click is not opening Service Mode. Any suggestions?

[@copel]

Amazing dude !! ^^ Thanks You :-*

[@slimaneyoub9531]

شكرا لصاحب الفيديو

[@Davidow1]

Theri website claims that the Ricoh 112 has Windows 10 support but it's not true. I've tried it on 3 different computes without any luck. It is however possible to print through a Windows 7 Virtual Machine using VirtualBox and some work. :)

[@bestonyoutube]

My red LED has began blinking a few days ago, what does that mean? Will it stop working randomly now in the next prints?

[@fabifaure]

Thank you very much! It works!!

[@cyrilledesile1]

Merci. Super astuce!

[@ofahossam]

you are genius thank you my dear

[@Brumby0]

Your audio level is rather low but awesome, thank you very much!

[@luciandegeu9148]

Hi! I try to do the same with SP211 and the installation it's worked just fine, but not the access in "service mode"! You know something about this? Thanks!

[@riadhkrelfi7577]

thank you for this solution

[@TheJoykouta]

Didn’t find a setup icon when unzip the folder

[@periclestoukiloglou7366]

I have a Ricoh SP211 running on win10 64bit. I've downloaded and installed the Smart Organizing Monitor, but nothing happens when I press Ctr+Shift+doublerightclick at the About screen. Any pointers? Thank you

[@maksgrzegorzko6160]

Hey, it worked, thank YOU!

[@thechichorachokra8237]

Thank u so much.. Bt i have prob. My SOM showing "device is bg cant open" when i press cntrl+shift+dbl click

[@thechichorachokra8237]

Pls help.me

[@pinkyperky566]

Hi Where do you get the Smart Organizing Monitor - ricoh reports it has been removed

[@Sp1d3r_34]

I have Smart Organizing Monitor (and the pilot for Win10) , i would like to give you but how ?

[@pasipp]

When I try to start smart program, it says cannot find usb printer! Even it's properly connected to computer ! Any ideas?

[@darkelyaz]

Thank you...you save my life.. awesome

[@camapfamii]

Thanks so much. It's really helpful

[@Siddaraju]

Thanks, i have done after watching u r vedio, Love u Man

[@MonteCarmelosevilla]

thank you very much!!!!!! you save me now!!!

[@agisfere]

thank you, you made my day!

[@nightfever1692]

Спасибо большое Просто помог ОВер много тебе лайков

[@IslamShady]

how can I make it for SP211su? as it doesn't has smart organizer?

[@gajakassagar]

Ricoh sp 300dn error sc542 all lights are glowing

[@jcs5790]

Your video is not applicable to me. Can you help me with the SP150suW? I have printed very small prints and it is impossible that the toner is empty! I would be so grateful if you could help out :D

[@jcs5790]

I'm using a Mac if that makes a difference by the way.

[@myriam7097]

Unfortunately I only get 16 files when unzipping the file and none of them is called SETUP. I guess they removed this workaround for Windows 7 64 bits. There's a steady red light on the printer and also a red flashing one. It's a RICOH SP 12 DDST. Can anybody help?

[@gabdip9472]

YOU ARE THE BEST. **********

[@efdalsecgin9695]

Thank you very much

[@larisabonnard5773]

Great ! Thanx a lot. It works !!!

[@tomek7078]

I have a problem with Ricoh sp 112, burn 2 LED blue and red, the printer is new, never used, in the smart organizer writes mistake SC670.please help

[@Yoolan]

The code means that there is no comunication between the bicu board and the controller board. I would send it in for repair.

[@tomek7078]

Sam I will do the trick to fix it? Where is the controller, what I see there after dismantling printer?

[@SladkaPritomnost]

you could try to buy a new eeprom board.

[@tomek7078]

Where to buy such a board ?

[@SladkaPritomnost]

e.g.: www.aliexpress.com/item/compatible-cartridge-reset-chip-for-Ricoh-sp-112/32717956059.html?spm=2114.40010308.4.2.07VtHP you also may want to try to reprogram it by yourself github.com/lugu/toner_chip_reset

[@kjellahlen682]

Thanks but doesnt work with Windows 10. What to do?

[@nikospapadakis9269]

Very Good! Bravo! Μπράβο

[@michaelsantosannunaki]

Big Thanks...

[@forexnextgenerationtradeid2709]

I need help . When blue dialog box appear how we can go farword on service mode. ctrl + shift +doubl click not working someone can help me for that problem

[@akaNevic]

ctrl + shift + double RIGHT Click

[@sreejithtg3154]

Same problem

[@sreejithtg3154]

@@akaNevic not working☹️

[@epicuregarden1104]

thank ytou very much.

[@ushaiahk210]

how to the no print ricoh all ok ...test print ok but othe print not allowd what happen telme

[@Anntarnic]

Seems like it has been removed now :(

[@drahmedelsheemy3339]

Thaaaaanks Aloooot :)

[@ruberoti1495]

When i try to connect my pc it is show me please check your usb

[@advocatedevendrakumar975]

worng mode aa rha hai display pr es ka Koy solution hai kya

[@RandyRichAF]

Danke 👌😊

[@kamilkce86]

thank you

[@hanamey6441]

thank you sooooo much

[@ukaszsocha6707]

Super!

[@recordersrepublic2431]

thank you!

[@YOGESH_GAVIT_VOLG]

ricoh sp 210 red light error

[@LuigiForlanoPhD]

Great! Thanks a lot

[@shazlygigadraw9391]

good work رد

[@epicuregarden1104]

String shift means Ctrl shift....

[@blatoon3228]

Merci à toi