Thanks for sharing this. What a beast of an instrument, still the best on the market based on the price!
@LiraLab Жыл бұрын
Totally agree! Unbeatable on this price point.
@rul1175 Жыл бұрын
Question what are the melic thing in the channels? Did you replaced the plastic caps for those?
@LiraLab Жыл бұрын
They're just dust caps. You can buy those very cheap on the internet.
@halacs8 ай бұрын
Hi, how VNC can be turned on? Is it available with the factory firmware already? I just plan to buy one Rigol scope. Thanks!
@LiraLab8 ай бұрын
I recommend to update to the latest firmware. Just plug the Ethernet cable and use the instrument IP to access it via VNC client. It's that simple!
@rim38992 жыл бұрын
Great new feature! Can you please tell us what else is new on the new firmware update? Thank you!
@LiraLab2 жыл бұрын
They made an overall speed optimization! Everything is faster now. There is also the color of channel 4 that has a much better blue to it. SCPI commands also have reduced latency now.
@Epictronics1 Жыл бұрын
Thanks for making this vid. If you use the knobs and buttons on the scope. Do all changes show up on the PC without any latency too?
@LiraLab Жыл бұрын
Yes sir! Signals update instantly.
@Epictronics1 Жыл бұрын
@@LiraLab Awesome, sounds like this could be the perfect scope for electronics KZbin channels then? I recently tried to capture what I was doing on a 1054Z. The software had almost a second of latency with USB and all the settings I did on the scope, I also had to do in the software :/ Thanks again, I'll probably get one of these instead.
@LiraLab Жыл бұрын
@@Epictronics1 I didn't like that software. Now with VNC it's a completely different story. There's no comparison at all with the regular software. This is way faster.
@КсеносБиблиарий Жыл бұрын
Have a nice day I'm sorry for the message, I wanted to ask you about the MSO5000 Series oscilloscopes, I'm just planning to buy a similar one I read in the manual about the function of recording the waveform from the input channels and the ability to transmit using the built-in generator. But I could not find information, is it possible to record 2 signals from different channels at the same time and transmit them simultaneously using different outputs of the generator Recorded on equipment and reproduced, I want to use it to test IGBT drivers from UPS on the desktop. There is no desire to work near the equipment, as the voltage is about 800 volts. 2 separate channels come to the IGBT control board, if there is no one signal or not at the right time, then the board cannot be checked. Sincerely
@LiraLab Жыл бұрын
You can do that with the MSO5000 Eugen! I'll make a video about this feature. Just be careful that the internal generator can only record signals up to the maximum amplitude and frequency that it can reproduce. I'll do a video in English today and publish it.
@LiraLab Жыл бұрын
Just uploaded the video with the arb generator loading real signals here: kzbin.info/www/bejne/pZq5ZWljpLl6eKcsi=T_7HFTZarY90T7kH
@КсеносБиблиарий Жыл бұрын
Thank you for the answer@@LiraLab
@martinkuliza6 ай бұрын
6:51 You could also put your mouse ON THE TRACE.............and DRAG IT up
@upendownlinker Жыл бұрын
Doesn't seem to work on my mso5000
@LiraLab Жыл бұрын
Have you updated to the latest firmware on your MSO5000? I believe it doesn't work on factory firmware.
@martinkuliza Жыл бұрын
OK so you forgot 2 things 1. Where is the VNC client Menu located in the MSO that we may set it up (obviously it's easy to download VNC to your PC) but the device needs to have it as well 2. How do you create those shortcuts ?
@LiraLab Жыл бұрын
Excellent question Martin. 1. Just connect the MSO on the LAN port and use its own IP to setup the VNC client on your PC. 2. You just need to upgrade the MSO firmware to the latest and the menu is automatically setup with the shortcuts.
@carloscesar8092 жыл бұрын
Very good video
@LiraLab2 жыл бұрын
Thank you Carlos!
@Huseyn_Repairer26 күн бұрын
Can't you connect me?
@funitoMTB Жыл бұрын
English please. Thanks
@martinkuliza6 ай бұрын
It is English
@martinkuliza6 ай бұрын
OK, I'M GOING TO ADDRESS EVERYONE'S QUESTIONS IN 1 POST 1. WHY DOESN'T VNC WORK ON YOUR SCOPE ? - Most of your scopes are Firmware Version 1.3.0.3 VNC Is not Supported on this version VNC SUPPORT STARTS on 1.3.2.2 (I am yet to find a person who has a scope on that version) 1.3.3.0 (The Latest Version) Does Support VNC Remote Connection 2. SOME OF YOU ARE ASKING.... HOW DOES THIS WORK , OR HOW DOES THAT WORK, Things Like Measuring with Cursors, Recording Functions, Help Options I ACTUALLY MADE A VIDEO SERIES 13 Videos, Very Detailed, Everything a beginner would ever want to know about their MSO5000 as well as scope tricks and technical information about components and testing them with scopes. as well as insight into how C.R.O.'s Work The purpose of this video series was......... After a beginner upgrades their scope and fully unlocks it, They usually just sit there and play with cursors.... WELL, WHY NOT LEARN EVERYTHING THAT YOUR SCOPE IS CAPABLE OF ? that's what the course is for here is the link to the post on EEV Blog www.eevblog.com/forum/testgear/post-hacking-rigol-mso5000-post-hacking-tutorial-deep-dive 3. HOW DO I ACTIVATE MY SCOPE AND UNLOCK ALL THE OPTIONS SO THAT I DON'T HAVE TO KEEP USING THE PATCHING METHOD There is a link at this EEV Blog Post www.eevblog.com/forum/testgear/hacking-the-rigol-mso5000-dr-mefisto-licensing-method/ It's easy, Just go to the link IN THE POST for the cloud Get the PDF to follow along Get the Python Script Follow the instructions And...that's pretty much it NOTE : The script has gone through a huge evolution and we have made huge leaps just recently In point form - it started with the DS2000A with Symmetrical Encryption - We got past it and everything worked - on MSO5000A at first we couldn't do Symmetrical because it uses Assym Encryption. - We found a path as a work around, but the problem was, it didn't survive upgrades and a new patch would need to be used each time, Also... Features were activated that the scope couldn't actually perform - Another problem was.... We couldn't activate MSO7000 and MSO8000 - Also the process wasn't very straight forward, it did work, but it needed to be done very specifically - NOW IT'S DIFFERENT - The Script PROPERLY LICENCES AND UNLOCKS ALL AVAILABLE OPTIONS FOR THAT MODEL - The Script can licence MSO5000, 7000, and 8000 - You just need to run the -r switch to regenerate the private key, After that - The scope will AUTOMATICALLY reboot - The scope will AUTOMATICALLY go into Activation mode for you - The Scope will then AUTOMATICALLY reboot again so you don't need to do the boring stuff - It will show you what i'ts doing the entire time - Then it will show you it's activated There's no more Assertion Error issues as a result of incorrect key length we've also added more options to the script - More in depth debugging options (if they are needed) - The ability to reboot from the C.L.I. without having to press the power button - We've made the script and activation process faster, it has gone from 15mins activation time to like ... 2mins or less So... if you're not activated...........WHY NOT ? If you have any questions..... Ask, there is no reason why everyone shouldn't be activated and Licensed You can also do it from any version you want You can downgrade whenever you want You can uninstall the options whenever you want (if you need to return your scope to rigol) and you can reactivate the options whenever you want and of course... If future upgrades come out... You can just get the .GEL file legitimately from the rigol website and install it and not lose your options. FURTHER TO ALL THAT We are currently in development to push the script further We know that the scope MSO5000 can have a max bandwidth of 350MHz WELL, WE BELIEVE WE CAN GET THAT TO LIKE 800MHz, Possibly even up to 2GHz But.. that's still a few months away We also want to see if any other options on other models exist and are possible on MSO5000 but as it stands.. there's no reason why EVERYONE shouldn't be upgraded to all the current options and yes, BY ALL MEANS.............. USE VNC VIEWER, it's just so much faster than the Web Control interface Hope that answers everyone's questions