Rinehart Racing Slimeline Duals Header Install 100-0452 2017 and up Harley Touring

Common Man Bagger installs a set of Rinehart Racing Slimeline Duals Header P/N 100-0452 on a 2018 Harley Davidson Street Glide. This installation will be the same on all 2017 and up touring models. Stay tuned to the end to hear they sound compared to stock.

[@DavidKerner-en1ww]

Great video I've got the same setup with the slip on mufflers.... And now I'm getting ready to install the same headers.

[@ThePNWRiderWA]

That what I have on my road glide. Very happy with them. A nice low tone

[@commonmanbagger9165]

They are a great setup!! Thanks for watching. -Chad

[@jasonbreedlove495]

Sounds awesome. Running 4.5 DBX on my RKS and need headers to get rid of the sewing machine.

[@commonmanbagger9165]

Headers will make all of the difference!! Thanks for watching -Chad

[@jasonbreedlove495]

@@commonmanbagger9165 kinda what I'm thinking, this 114 is a wicked motor that needs to breath.

[@commonmanbagger9165]

114 is a great engine. Lots of torque but they suffocate it coming out of the factory

[@surfczar]

I did this yesterday. It took a little over 4 hours, and when you say "We make it look easy" you're not kidding. In the end it is so worth it. Did you install the provided baffles?

[@iowa-farmer5294]

I'm looking into the same headers. I've had the Rinehart 2 into 1 before and I loved them, but they were too loud on long highway trips. How do you like the Slimline Duals for long highway trips? Do you think they're too loud or have any regrets?

[@commonmanbagger9165]

Chris has no regrets with them. They do change the whole sound game however. Thanks for watching -Chad

[@waltervogel4360]

Great video, I have stage 1 with air cleaner, VH fuelpak and rinehart 4.0 slips. Getting stage 2 done this week, woods 555, S&S adjustable rods and S&S lifters. I am now also considering just getting these headers put on for a full exhaust. What do you think?

[@Jstarz600]

Are you guys able to post up another video with some idling and cold starts vs. warm starts I’m interested in the 4” slip ons and header pipe.

[@rbljackson]

Question…. I want improved sound but not too loud for going down the highway on longer rides. Do these stay loud all the time or do they give you a decent lower decibel ride when just cruising at 75/80?

[@surfczar]

Came for the instructions, stayed for the muffled sped up voices :P

[@morrisdennis]

It looks fairly easy

[@ethanpersons1588]

Does this system you put on with the DBX mufflers have the hi flo cats?

[@pktech1969]

What did you do to tune the bike after putting the head pipe on? Curious as I'm going w/the same setup. thanks

[@commonmanbagger9165]

Sorry for the late response. Chris already had a Harley Street Tuner on his bike that he purchased from the dealer when he did his stage 1. Not the best option out there. Thanks for watching. -Chad

[@antoniocampos6627]

The Tech on my bike re tuned it for the new parameters of a full system exhaust. I tuned it on a dyno using the power vision tuner. With a 480 cam and a new SE oil pump I was able to get 120 ft lbs of torque out of my 107 M8

[@BADINTENTIONSRECORDS]

👍🏿👍🏿

[@snakebite6511]

I did the same except i went with Cobra headers and Cobra neighbor haters - with a tune of course

[@Jstarz600]

@Snake Bite do you have any clips on sound I’m between the rinehart and cobra full system…

[@snakebite6511]

@@Jstarz600 not really, both Rinehart & Cobra full exhaust sounds good, i just prefer the deeper throatier sound of Cobra

[@Jstarz600]

@@snakebite6511 can you send me something via your phone or email?

[@snakebite6511]

@@Jstarz600 I can text you something but I need your number

[@CenobiteBeldar]

So would I have to use a tuner if I leave the air cleaner alone but put the full rinehart system on? I've heard you're ok if you leave the air filter alone, you can get away with getting the cool sound you want out of the exhaust without tuning.

[@commonmanbagger9165]

If you are just looking to improve sound you can get away without tuning. If you are looking for a little bit of performance change the cleaner and tune it. Thanks for watching. -Chad

[@porterhouse4421]

Did you have to use a thinner gasket? I’m trying to get mine done but the stock gaskets aren’t letting my line it up

[@randyboisa6367]

start with inserting the rear header tip first then the front header tip will line up. Did my 2020 Road glide special with this set up and fought the header line up. just start at the back, front will slide in.

[@stolnpckup]

I thougt it was shake and bake. Not shake and wiggle.

[@morrisdennis]

Do u need to remap? I've got the stage 2 se tuner rineharts slipons.

[@commonmanbagger9165]

If you do a high flow air cleaner and headers you should do a remap. If you have the stage 2 you may need to have your SE tuner mapped for that particular setup. Thanks for watching. -Chad

[@larrystorrs78]

Did you have to reprogram the bike after you did the exhaust?

[@commonmanbagger9165]

The bike does need to be tuned after install. Thanks for watching -Chad

[@jackgentile2417]

@@commonmanbagger9165 I am definitely thinking of adding this header to my 2017 RGS. If I am understanding correctly the bike will need a tuner. Any suggestions on the best tuner?

[@Alexis-mx1lp]

💐 P r o m o S M!!