Ring Cells in Rhinoceros. Tutorial.

[@patriciacostalonga5282]

Thank you so much! You didn't have to say a word to make a great tutorial, I've learned a lot from you! :D

[@SantaYork]

+Pat Costalonga thank you! I appreciate it.

[@Djblaze337]

love it..specially the choice of music. over here at work gettin down.

[@maha-vn9zs]

Thank you very mush Mr Santa

[@ZZ-ib6zb]

A simple question about 00:30. first time you swept it showed on right side and when you sweep again why it change to left.

[@wingnut0837]

When you pick the curves in a different order it will reverse the direction of the sweep.

[@SantaYork]

Yes It depends on order.

[@luckyhappy65]

Thank you so much for your kindness to share this!!

[@SantaYork]

You're welcome.

[@kurilladesign]

fantastic , did you stick diamonds in those??

[@artjewellerydesign8768]

Always excellent your work 😍😍😍

[@sknfo7]

i've found a problem on boolean difference, at 10:07 min; i"ve all steps mirror, cap, boolean union, but i stoped in boolean can someone help for this step please?

[@toddrichman1]

any chance you could provide the command history? i love the work you've done, however i generally work by typing in commands, whereas you graciously point and click to each step in the workflow, and i'm finding it difficult to follow visually. any help you could provide would be much appreciated! thanks again for the video!

[@nhoctinsock]

I do not understand 8:39 minutes what command you to do so quickly cut

[@SantaYork]

'Extract surface' Right click on 'Explode'

[@GoodAsNewRestoration]

haha, that music that starts at 4:40 is so perfect. what is that? I wish at times that I could see which tools you were using, Text at the bottom with the names maybe? Great video though.

[@SantaYork]

Jimmy Fontanez - Cha Cappella

[@bkbkhh]

help ~ ... Last BooleanDifference, do not apply ...

[@TheDrMoroz]

Спасибо за уроки!!! Постоянно обращаюсь к твоим видосам, если возникают вопросы.

[@jotsamourtzi7318]

i have a problem at 4:50, when i do the smash, it comes up a completely reversed surface that looks like an hourglass... what is wrong?

[@SantaYork]

I need to see

[@razbojnici]

Same for me. Where can I put picture?

[@SantaYork]

Use "Surface ---> Surface Edit Tools ---> Adjust Closed Surface Seam" docs.mcneel.com/rhino/5/help/en-us/index.htm#commands/srfseam.htm www.rhino-book.ru/rhino-surface-surface-edit-tools-adjust-closed-surface-seam.php

[@marijanjurcic5686]

Thanks for that. It worked for me.

[@the_real_vdegenne]

Thanks so much to share that ! best regards

[@SantaYork]

Thank you

[@MariaJose-le4eh]

When I try to make the curves network rhinos give me an advice, what can I do?

[@SantaYork]

follow the advice

[@jeffanderson13]

Nice. You could consider using the command merge face or merge all faces though, saves up some time

[@pokepickachu]

Instead of exploding and deleting the fused face, you should use the "mergeallfaces" command

[@SantaYork]

Everyone has their own methods. You can make a video too. Your method do you make it ring.

[@fersilva7927]

Brasil Meu Brasil brasileiro Kkk que louco Na vida é sempre bom saber um pouco de cada coisa 😉

[@babkenarzunyan]

Здравствуйте Уважаемый Коллега. Очень грамотная и профессиональная работа. Спасибо за такое видео, Недавно я собирал модель на Rhinoceros, приблизительно была такая стиль, но я не мог четко, идеально и равномерно получить эти полоски, а клиенту нужна была идеальная модель. Если я Вам отправлю фотка кольца, скажете можно его сделать в этом стиле ?

[@SantaYork]

Здравствуйте. Давайте попробуем [e-mail]

[@babkenarzunyan]

Спасибо большое, сейчас отправлю.

[@irfanshaikh-ze4su]

i am designer so please help me

[@SantaYork]

What help you need?

[@ThePigmeos]

hello i have one problem in the smash what can i do!!?

[@SantaYork]

I don't know What your problem?

[@ThePigmeos]

how can u put the numbers when u move something?

[@SantaYork]

I use keypad

[@ThePigmeos]

whats that?

[@SantaYork]

Explain the problem

[@oddo6510]

wehn I do flow along srf, distant of each bject gets extend in 21munite

[@ThePigmeos]

11:53 - 11:54 how did u do that

[@SantaYork]

I used bindings. (Osnap) Look down on display

[@sacvhbm]

Helloo!!........why you changed to work with the left side when you had already done the right side? and how did you do it ? 00:28

[@SantaYork]

I prefer to work on the left side

[@keskinaytac]

is that possible to make such a ring in autocad ? :D i am very new to rhino and my mind is exploding when i see how people are intelligent.

[@SantaYork]

I do not work in AutoCAD Probably this is possible. I dont know.

[@littleskittles9589]

it is but using a different technique

[@easirmahmudemon3404]

I am new with this.. can you help me to give all plugins without demo version?

[@SantaYork]

All Plugins you can buy on official website. www.rhino3d.com/sales/europe Your welcome P.S. Subscribe to my KZbin channel feed and learn a lot new!

[@easirmahmudemon3404]

CAN I GET THOSE FREE ANYWHERE?

[@SantaYork]

Look on the Internet. Is it not my program. I am 3d modeller.

[@julianvargas1544]

Why do you explode and delete faces instead of make an boolean union? Is it you way of working or is there another specific reason? ...just asking. Thanks for the video.

[@SantaYork]

You can use "Merge All coplanar faces" I recently found out about this feature. :)

[@alcazar6000]

When I smash this object, it splits it at the top, not the bottom. In other words, my flattened mesh goes from fat to skinny to fat (top of ring on the ends) instead of skinny to fat to skinny so the top of the ring is in the center of the work. Do you know why that is? What did I miss? TIA

[@SantaYork]

+Bootyhandler Watch a video tutorial carefully. What is missed.

[@o0ovnTaurus]

+Bootyhandler I DID LIKE YOU, I KNOW YOUR PROBLEM --> WHEN YOU MIRROR THE BIG CIRCLE AFTER ADJUSTED, PLS TRY AGAIN MIRROR AT 1':08 CHOOSE MIRROR--> FIRST POINT AT BOTTOM---> END POINT AT TOP... AND THEN JOINT 2 CURVES, AND MAKE SAME ALL STEP... IT WILL BE OK .

[@alcazar6000]

+Santa York Thanks, I did not have that issue the next run through your tutorial but on the third pass, it again happened. I noticed when I render curve network, the A,C reference is on the bottom on the failed attempts and on the to top on the successful renditions. Do you know what it is in Rhino that determines what curve it references under edge matching (what curve it chooses as the A,C) in a curve network. I have looked all over the net and cannot find an answer. Having seen other tutorials for Rhino, your tutorial was nearly flawless in comparison. You are truly a master at this program, hoping you know the answer to this. Thanks in advance!!!

[@alcazar6000]

+Bootyhandler I found the answer. You can use 'Adjust closed surface seam' and move the seam to the opposite end.

[@SantaYork]

+Bootyhandler It is very cool!!! Thank you!

[@muhammadashfaq8353]

hey! how did you created that video 22:42 ?

[@SantaYork]

keyshot

[@jhonharryvelasco6333]

do not give me the steps from 8:12 minutes!!! help!!

[@SantaYork]

"Array Along Curve" -> "Mirror" (Y-axis) -> "Boolean Union" -> Select Curve and Hide -> [ "Extract Surface" and Delete -> "Cap Planar Hole" ] X2

[@joiawebsite4338]

Is to fast....can you going slow..is hard folow comands...I no have skill yet....but, great video.

[@alializadeh8195]

Thanx

[@raseldesigner7429]

I LOVE Rhino

[@svetlana-6777]

Очень круто, но слишком быстро...

[@walterfantauzziphotography]

Hi Santa York, I've try to make this ring but when I'll make the smash my exploted shape form is different, so why? I've try to move the seam point with _SrfSeam command but the smash form is different from your

[@SantaYork]

The Surface Seam should be one. You must do everything right. Check your work and find the error. So remotely I can not help, because I do not understand what is being said.

[@RadikGismatov]

Делаю все по вашему примеру. Но видимо у меня начало плоскости не в том месте. Как это исправить? Развертка болванки(Smash) получается не симметричная.

[@SantaYork]

честно говоря у меня так тоже периодически бывает. Попробуйте линии построить заново. Изменить угол например. В этом процессе я сам не всегда понимаю логику программы. Ну и при выборе линий для выполнения функции очередность выбора часто играет важную роль, тем самым показывая начало или конец линий. Так же направление вектора линии может влиять. Выберите одну линию или плоскость и нажмите Analyze Direction. Смотрите ссылку www.rhino-book.ru/rhino-analyze-direction.php

[@RadikGismatov]

Спасибо за оперативный ответ. Попробую. А так прикольно, изучаю райно, очень нравится! P.s. Нашел. Оказывается легко, в "surface tools" есть "adjust closet surface seam". Меняет начало.

[@SantaYork]

Отлично! Потом, возможно тоже внесу эту функцию в какой-нибудь урок )

[@alejandrodelvalle4083]

hey! thanks for the video and awesome music! Could you please tell me who plays it? and perhaps the song's name!? Thanks a lot!

[@SantaYork]

kzbin.infomusic

[@nikto1084]

как называется модификатор который натягивает паттерн на поверхность кольца ? очень интересно. спасибо

[@SantaYork]

Если я правильно понял вопрос, то я использую две функции: Flow Along Curve и Flow Along Surface.

[@nikto1084]

я пользуюсь 3ds max и Fusion 360 но таких функций там нет, очень интересный подход к моделированию, как тебе Риночерос ? огромного хотения нет переходить на него, но когда видишь такие штуки начинай задумываться, еще вопрос пользуешься ли ты Zbrush ?

[@SantaYork]

Я давно моделю в Ринке, ещё пользуюсь Blender и да. ZBrush тоже использую временами. Думаю, что в 3DMax тоже можно придумать как сделать что то подобное.

[@nikto1084]

ну можно сделать UV mapping. а здесь фича намного круче, плюс есть точнее размеры

[@nhoctinsock]

you can only draw the rings themselves by software matrix

[@SantaYork]

I like Rhinoceros

[@andreg9513]

I liked your video. If you have more videos with smash command please share with us..

[@jazielmorales9677]

disculpa al minuto 10:32 cuando trato de unirlo me marca que la unión ha fallado que puedo hacer? o que hice mal

[@SantaYork]

Perhaps there are uncovered polysurfaces. Need to check everything.

[@jazielmorales9677]

disculpa como podría saber si esta abierta? y como podria solucionarlo

[@jazielmorales9677]

tienes algún correo para mostrarte una imagen sobre como voy con el anillo serias de mucha ayuda y gracias por responder

[@SantaYork]

надо смотреть файл [e-mail]

[@jazielmorales9677]

gracias ya te mande mensaje

[@RadikGismatov]

Что за музыка?

[@SantaYork]

музыка из библиотеки KZbin.

[@p_presenting9285]

Thank u sir.... Brilliant....

[@ThePigmeos]

miunute 8:29 how did u explote just the faces?? :o i cant :c

[@SantaYork]

Rhight click mouse on "Explode" (Extract surfase)

[@ThePigmeos]

amazing dude!!! thanks!!! i hope u can answer the next questions c:

[@fabiolozano578]

Hola buenas tardes, deberíamos regalar un 3dm mensual se imaginan como le serviría a los que comienzan???

[@SantaYork]

I'm sorry, What?

[@АнатолийПопов-й7ь]

Спасибо за уроки, но вот вопрос по поводу булеана и закрытия модели. у меня он не проходит, точнее я могу либо вырезать квадраты, и потом не будет соединятся с решеткой, и тоже если в другом порядке. что в таком случае делать?

[@SantaYork]

Пожалуйста. Что бы ответить на Ваш вопрос, я должен видеть Вашу модель. А так мне не понятно почему у Вас не получается.

[@АнатолийПопов-й7ь]

хм, а как тогда вам эту модель показать?

[@SantaYork]

[e-mail]

[@АнатолийПопов-й7ь]

спасибо, объеденил в model works)

[@kurilladesign]

good stuff!!

[@MrRubendariocba]

Hola,te puedo comprar los archivos? Gracias

[@SantaYork]

Hello Yes. my mail: [e-mail]

[@burakarikoglu]

YOU ARE THE BEST

[@fabiolozano578]

Thank you

[@kristinawashington1773]

I liked this. :D

[@ClaushCraft974]

Thanks bro ;DContinue videos and subsribe you yo +Santa York

[@fabiolozano578]

Gracias

[@ThePigmeos]

I CANT DO CHANFER EDGE :/

[@SantaYork]

It means that doing something wrong

[@苏察哈尔焊]

不是你不会，是你懒。U can do that ,however,U R lazy

[@ISRAELRAVELO_ISEKO]

Este video es totalmente mostrativo, no educacional, pues no explica nada, quien no sabe no entendera nada!

[@dianaazeneth]

WOW.

[@toscarriergeometra4603]

very well!!!

[@thanhle-vr9rs]

Quá hay! mk chỉ coi thôi, ko làm theo được.

[@SantaYork]

I don't understand. English please.

[@thanhle-vr9rs]

So good! I watch video but i don't draw it. no note. because i don't understand.hiiiiiiii

[@SantaYork]

This video shows the principle of building a model. If you do not know the program, then it's too early for you to do this model.

[@JohnDoe-hf5zh]

Way to fast I can't keep up

[@ThePigmeos]

I CANT DO THAH 14:50

[@SantaYork]

left click +Ctrl

[@dzjo100]

Здравствуйте! Подскажите пожалуйста, как можно сделать через grasshopper кривую/объект-родителя. Т.е. Есть главная кривая и множество ее копий в разных местах, изменяя ее параметры (точки, масштаб и тд) менялись ее копии соответственно. Просто вручную все менять очень долго, их много. Подумал, что решить это может grasshopper, но поставил его только вчера, опыта работы еще с ним нет, но есть понимание.

[@SantaYork]

Здравствуйте Я не работаю с grasshopper

[@dzjo100]

понял, спросил, может какие ещё варианты есть. спасиба)))

[@SantaYork]

Если копии были сделаны через Orient или Copy, то они будут сохранять историю и меняться вместе с "родителем". Главное, что бы была включена "Запись истории" и копии не подвергались изменениям после копирования.

[@dzjo100]

Santa York, спасибо огромное! сохраняет историю!

[@dzjo100]

а где бы посмотреть что пишет рекорд хистори, скрипт сам

[@Danapanik]

Questo video è talmente veloce che non si capisce nulla di ciò che fai

[@sksaiful960]

nic

[@SantaYork]

Увидел своё кольцо в презентации принтера "D2K Insight" :) kzbin.info/www/bejne/bHqVZ2mBiZJpp6cm7s kzbin.info/www/bejne/l4aYe6RmiMiCf9km7s