#ring

Welcome to Bazzar Repairs. A channel dedicated to the testing, review, and repair of various devices and electronics. In this video, I'll install the Ring Alarm 8 piece kit 2nd Gen - home security system.
www.amazon.com/gp/product/B07...
Contact: [e-mail]
Join our Discord @ BazzarRepairs Server
Telegram @ BazzarRepairs
If you would like to support Bazzar Repairs consider donating. We accept the following:
PayPal.Me link: paypal.me/bpowter
Bitcoin:3Lm9vxiYXUMsaxPqonngGWHYzDUf33XYmU
Ada:addr1qxxxmx8u448vd96ktw2aknfjehuq6cqflln4c8ckqkk5s7t84yndmyn2f35mthkrcupn2mmsgyzpxydx5a4petpxfrgqaxvuhf
Ethereum:0xd8E9e74943F0f2b8604e6F18859455D4dFb344B0
LiteCoin:ltc1q3u7jlzv2cljl690zkz2thpedn0y3jr33qllfw2
Thanks for watching, please like and subscribe.
Twitter........... / bazzarrepairs
Instagram..... / bazzarrepairs
Discord.........BazzarRepairs Server
Telegram......@BazzarRepairs

[@christinebielawa6499]

Thank you! You were very helpful. Your instructions were perfect!

[@noabert]

Attaching the doorbell to the mount is a little difficult but once it locks into place it seems extremely sturdy. kzbin.infoUgkxxHZwMa8CsRjYhf9s4W8w0Dwm47uytWOp I replaced my regular doorbell with this and hard wired it in, using my existing wires and mechanical chime. It works perfect so far and integrates perfectly with my blink camera system. It also works seamlessly with Alexa

[@allabouthair10]

This was great!! Thank you.

[@FiresKitchen]

great video. clear instructions and look forward to using your tips to install my ring alarm. thanks 👍

[@efrainvillamizar6091]

Thanks for the easy vid man

[@BazzarRepairs]

No problem!

[@Cisco8484]

The keypad is supposed to run for about 7 months on a charge. You don't need to leave it plugged in all the time (unless you want to).

[@abc123fhdi]

@@Tony.Nguyen137 24 hours on battery. But may be less if you have 100 sensors.

[@abc123fhdi]

Better to have it plugged in one less thing to have charge every few months.

[@agood100]

You didn't need to run the power cable from the keypad... It used to recharge the battery, which lasts a long time.

[@DarkroomZombie]

Fantastic video, thanks for sharing.

[@BazzarRepairs]

Thanks

[@jeljello4259]

Always ensure you are setting up your devices within 10ft or less from your base station, also do not mount your sensors upside down, it damages the Reed switch, also causing the tamper switch to slide out of place.

[@Haddley333]

10 feet or less from base station? Wow, that's a very small area.

[@abc123fhdi]

Got this for $174 at Best Buy. Might as well use the extender since they give it to you, just plug it in a wall outlet.

[@geraldcapo4400]

will this work with google nest voice control or just amazon??

[@frankcedeno5467]

Thanks for the info 👍👍👍👍

[@Kastriot13]

Thanks for the vedeo it helped

[@BazzarRepairs]

Thanks for watching.

[@sam10818]

Does this system arm automatically based on our location when we leave the house?

[@guylefebvre6323]

I have an older Ring system and it was not convenient for me to search for my iPhone or iPad when the bell rings. That’s why I will probably buy the Google nest system which includes a screen to identify who is at the door in seconds.

[@mujtabaqadiri7829]

damn that alarm is loud XD I think more louder then my spotlight cam battery

[@deleteduser7940]

Do you need to pay any sort of subscription to get notifications if mention is detected or a door/window is opened?

[@Moselli56]

Excellent video!! Thanks much!

[@user-jx6rj5pq7n]

Base station, keypad,range extender, contact sensor,motion detector and upstairs

[@EsenbekAliev_]

can you not install that pad? and just use ring base for sensors?

[@adamrrodriguez5596]

I’m going to get a ring for my birthday party 🥳

[@uglyoldblindbloke8298]

The keypad has a recargeable battery. You didn't need to run the wire to the plug. :)

[@BazzarRepairs]

Good to know

[@Keiths_OGauge_Trains]

Are the keypads battery as well? Do they have to be plugged in?

[@ufchistorian13]

do not need to be plugged in. can be used via battery.

[@user-zu9uh9xc1i]

My battery lasted a year before I had to recharge it

[@vijayalakshmivikraman6600]

Ok I will do it when we go to India

[@i_amduckie5320]

I have a question. I live in a townhouse. Do you know how loud it is outside can it possibly be heard through the walls??? I’m seriously considering getting this set up

[@Khunmichel4u]

It's very loud!! but you can reduce it in the app..

[@sealifesbeauty]

I like your shirt !

[@BazzarRepairs]

Thank you!!!

[@abc123fhdi]

The extender is for the Zwave, not a wifi extender as the sensors don't use wifi, so you should use it for better signal strength of the sensors since they include it in the box and all you have to do is plug it in a wall outlet. Monitoring use to be $10 but now $20

[@rayzor285]

This ☝️ also, your residence doesn't seem all that big. The range extender is intended for homes larger than 1500 sq. Ft. The range extender would just be a redundancy and a waste of an outlet.

[@hullie7529]

@@rayzor285 It baffles me how they include a range extender in all of their packs when most people won't have a use for them. It'd be much more useful to include an extra contact sensor instead.

[@Jaime88cesar]

The alarm system it’s the same membership with cámara or it’s different memberships

[@mele2259]

Hello. Thanks for the great video. Finally getting rid of ADT. I have a question please . I'm gonna have three different pads in three different floors. I need the pad upstairs not to chirp at all when any sensor is opened or closed. And I need the one in the middle and Basement floors to only chirp when certain sensors are opened and closed. Are these options customizable? Thanks so much.

[@staticage6]

You can program each keypad to turn chirp on or off. As for the sensors, you can program each individual sensor to chirp at the base/keypad, base only, or no chirp. Chirp on keypad and sensors are ON by default. Hope this helps.

[@georgebrodie9795]

Great video any reason why you decided to hook up your base station with a Ethernet connection. Do you feel it’s better than a wifi connection

[@BazzarRepairs]

Yes, ethernet is always better.

[@rajmajmudar3285]

I have 10 ft. ceiling. How high my motion sensor should be that pick up motion of 3 ft from floor, like burglar crawl to go places in house. It sound wierd but like to know height of motion sensor should be from floor??? Yhank you.

[@almmason7]

It says it will pick up over 50 pounds, so it ignores pets less than 50 pounds so the alarm is not going off. So, you should be fine. My ceilings are also 10-12 feet.

[@tylermuh1563]

If you unplug it it’s stay on if you want to plug it in it’s fine

[@Warrior4jesusss]

I just bought this system waiting for it to arrive. How do you like it so far? Thanks for your video. 😀

[@BazzarRepairs]

So far it's been great. Been using it every day.

[@vincog]

can i use it without any profesional monitoring services (because i am not in US) ? thnx

[@BazzarRepairs]

I believe so

[@MrsLyds]

Can someone explain me what Ethernet is ? What’s the difference connecting the base station on an Ethernet ? Btw very good video! A lot of info! 🙌

[@automatic12ga4]

An ethernet is a phone cable that comes directly from your router.

[@MrsLyds]

@@automatic12ga4 and why would I want to use this way of connection instead of the router ? 🤔

[@automatic12ga4]

@@MrsLyds a wired connection is always stronger than a wireless as far as I know.

[@automatic12ga4]

@@MrsLyds most componets are fine using a wireless connection tho

[@MrsLyds]

@@automatic12ga4 I seee… thank u so much for the info 💗

[@1865NubianUhuruMpiganaji]

Or use gorilla glue 2 sided type.. especially if you live in an apartment...

[@jacqbx]

Is it audible when you open the door?

[@BazzarRepairs]

Not super loud, but yes it does

[@jacqbx]

@@BazzarRepairs ok Thanks for the reply

[@eddiesfl7003]

Curious. It has a battery that last at least 3 months: why did you wire it?

[@eddiesfl7003]

Sorry, I was talking about the key pad

[@ericpigg2689]

I thought the same thing. No way I am running those wires all over my wall.

[@nicoleablan443]

The game was good but the app was great but the only thing that could do with the iPad version

[@christopheryeskie9529]

Is the keypad wireless or does it need to be plugged into wall outlet?

[@Khunmichel4u]

wireless.. charge it and last 1 year

[@nicoleablan443]

I’m going to have the girls to come to my house to pick them out for dinner tonight I will bring it over there tomorrow

[@AngeloR674]

I would of put the keypad closer to the door moulding so it looks more uniformed!

[@nicoleablan443]

H the best part is it will not work with me because of my heart that you are going through this process

[@andya8898]

No reason to drill when you can just attach two command strips.

[@darieanhenderson6926]

@andya8898 Perhaps he wanted it to be more secure instead of mounting it the lazy less secure way

[@andya8898]

@@darieanhenderson6926 Nah

[@JWolf-nh9uw]

No reason to attach two command strips when you can just drill. No reason to do either when you can just lay it on the floor. No reason not to do both when you can not do both. No reason not to shut up when you talk too much

[@andya8898]

@@JWolf-nh9uw No

[@JWolf-nh9uw]

@@andya8898 I don’t remember asking a question

[@rustyshackleford6259]

when did you realize that the keypad doesn't need to be plugged in?

[@BazzarRepairs]

Probably a month ago lol