RJWC Mud Edition + Tuner Kodiak 700 EPS SE!

[@MainvilleATV]

What do you think of the sound on the mono piston? Let's us know in comments!

[@780Aleks-AB]

Sounds angry! Oh and just from personal experience on long rides you might need ear plugs Haha.

[@MainvilleATV]

Noted! Thanks for watching.

[@Andricks110]

@@MainvilleATV sounds awesome, have you thought about wheel spacers to eliminate the rubbing? I have a 550 Grizzly, 1.5" and a 2" lift with 29.5 Outlaws, and I don't have no issues with the rubbing, but not so sure about the Kodiaks set up.

[@MainvilleATV]

Yes, we put 1" spacers and all is well now!

[@hondarider12100]

I'm on a 19 grizzly with no lift fitting 31 havocs ate the very corner or the floor. Board up but u cant tell unless I would tell you to look at it

[@thumperbangin2000]

Just did a full hmf titan xl on mine and its great how much better it runs now with it, much cooler and more power

[@GMC-lr4jj]

Love that quad!!! I have exactly the same one. Doing the two inch lift kit, 28” mud zillas on the stock rims, and the clutch kit. I won’t be doing the clutch kit having the dealer do that for me. Then putting on the euro slip on pipe. Just not pulling the gun on the tune kit because that will void out the factory warranty. Can’t wait to get everything done. Love the videos.

[@MainvilleATV]

Thanks man, good luck with the mods and keep us posted along the way in our fb group! - Cass

[@outdoorztime2923]

Nice! I am looking at getting my first Yahama Kodiak 700 this month. It is good you do your own mechanic work. They charge $99.00 an hour at our local atv dealer, but that was before all the inflation that we now have. I'm sure it's gone up.

[@big_ute]

I just ordered the rjwc slip on for my 19 outlander

[@markbernard1032]

When you took the compartment with the toilet paper off. It would have been a good idea to insulate the bottom. That compartment gets pretty warm. That was the first thing I did. Just a fyi.

[@ajjacobs1338]

That quad is bad ass guys great job really digging them sludgehammers

[@MainvilleATV]

They're wild tires, first impression is very good!

[@markjohnson3779]

Kodiac 700 KCSE Kyle, Cass, Special Edition. Nice video !!

[@MainvilleATV]

Ahah. Think Yamaha will go for it? Thanks mark!

[@780Aleks-AB]

Sounds awesome! Can't wait to hear it out in the trail!!

[@MainvilleATV]

Soon! We have a series coming!

[@devpenht07nonoplease92]

Does it stop it from idling underwater?

[@jammils38]

Love the sound of those RJWCs ! I hate the snap clips on can-am, those things are just a pain.

[@MainvilleATV]

I agree on both accounts for sure. Thanks for watching!

[@kcatv9556]

Very cool guy’s bike looks awesome! I’m jealous of y’all snow!

[@MainvilleATV]

You can have it. We get plenty.. haha

[@gregdeeth5701]

Sounds great and looks awesome. Nice work. Cheers 🇨🇦

[@MainvilleATV]

Thank you!

[@ricktheprick327]

FYI, if you do a AIS delete the annoying backfiring will stop. You can find how to do this on grizzly central, good job!

[@MainvilleATV]

AIS? I'm interested!

[@ricktheprick327]

Mainville ATV and Outdoors- hi guys I have a 2016 grizzly 708, Yamaha runes these engines very lean from the factory to meet emissions control standards and I could not stand all The backfiring on deceleration and found out about the AIS delete on grizzly central forum, it is a wealth of information on grizzly & Kodak ATV’s. The fuel controller is a must with the exhaust modification, with out it there is a good possibility of burning up your valves. The exhaust and fuel controller will also make the 708 run a lot cooler. I also noticed a subscriber crazyflyboy30 commented on having your primary clutch sheave Machined. This will make your belt ride lower at low speeds for more torque, I had mine done and love the results and you do not lose any top end. Hope this will help you all.

[@MainvilleATV]

@@ricktheprick327 we are using a tuner with this set up. Am I missing something? Sorry!

[@ricktheprick327]

Mainville ATV and Outdoors -no sir, I seen you had a tuner I was just stating that without one it could be bad news! Your good to go!

[@Broknex]

The stock "boring" pipe! LOL I'm using that word "srpinginicty", too! HAHAHA Such awesome mods for the Kodiak! Sounds fantastic compared to the stock exhaust!

[@MainvilleATV]

Thank you very much and thanks for watching!

[@FistKnuckles]

Great channel, keep these awesome vids coming! Nobody is making quality stuff like this, showing off mods to yammies!

[@duffmacfadden3052]

Hey guys love the vids! I did a farmer lift on my grizzly, put the back shocks on the front and used fox float on the rear from an Arctic Cat! Lifted the quad just under 2". Racing this weekend at Hill Top resort, Grand Beach MB. You guys rock!

[@ajjacobs1338]

And yes it sounds great too

[@MainvilleATV]

Sure does thanks!

[@jonmills3018]

Where is your tiger tail bolted on!!? I have one on a hitch mount and hate how it sticks out that is so clean you have there !!!!

[@MainvilleATV]

Its bolt the same as everyone else, I just flipped the bracket upside down so it tucked back into the machine.

[@jonmills3018]

Mainville ATV and Outdoors mine came on a hitch receiver mount so I just put it in the hitch and a pin through and went on. But it sticks out ... I am not sure what bracket your talking about I’ll have to have a closer look at mine. Could you email me closer pics ? [e-mail]

[@MainvilleATV]

The reciever goes it, then you bolt the mounting plate. Flip the mounting plate upside down and itll bring the whole thing inwards. You can see what I am talking about in a recent video I did installing one on my outlander.

[@MainvilleATV]

kzbin.info/www/bejne/op2xco2XbLyIqaM

[@xmrmudninja1165]

You guys got great sponsorship or a lot of money lol any way it's nice to see a couple doing it together I'm looking at getting my wife a bike for next year how dose your wife like her bike

[@MainvilleATV]

We are very fortunate either way ahah. My wife loves the kodiak. She wont be looking else where for a long time I figure! Thanks for watching!

[@ehTV1000]

Badass Yami

[@MainvilleATV]

It's coming along for sure!

[@georgewilson1634]

Hey guys, i just put an hmf pipe and fuel optimizer. Works great! But have gone from getting 160km out of a tank to about 110 . Did you notice i big difference with your Kodiak?

[@Kbrookeish]

Did your header pipe run much hotter ?

[@bobby9899]

You guys are awesome keep up the great work.

[@MainvilleATV]

Thanks man, and thanks for watching!

[@nanurluk134]

Is that an automatic cam chain tensioner behind the header pipe? I swapped mine on my 680 Rincon, I usually check 3 times during regular season for the proper tension and adjust if needed

[@everythingoff-road6637]

I like seeing the Kodiak having a 10 mill bolts under the fender can Am is just shitty push pins

[@MainvilleATV]

No kidding eh? I love working on the yammy. So easy.

[@lucasfromdavalley]

Classic yamaha quality

[@rickygreer7288]

You Guy,s got that Kodiak look,n Great...What size tires you running on that bike?

[@cassandramainville7549]

Thanks! And we're running 30x10r12 Sludgehammers all around.

[@Searchin4tone]

Beautiful Kodiak! Did you notice a difference in the power steering with the larger tire, is it harder to turn?

[@jha8697]

Love the videos, it hurts me seeing the “insides” soo dirty 😉

[@MainvilleATV]

I hear you, it was promptly sorted out after this ahaha

[@First_Take.]

Can u post a video of the fuel tables?

[@leviberube4513]

Is the can-am handlebar mud strap universal for our kodiaks? I need one of those! 👌

[@MainvilleATV]

The one on my outlabder is oem from can am and for can ams. For your kodiak, dirtylife.ca has an aftermarket solution :)

[@olramman]

Sounds awesome!

[@MainvilleATV]

Thanks buddy!

[@Valincan]

Sounding good and looking mean Yamaha got some attitude now

[@MainvilleATV]

She sure does and more to come too! Thanks again for watching!

[@bobby9899]

Happy holidays

[@MainvilleATV]

Thanks, you too!

[@wiggy8884]

HMF WOOOOOO but better then stock

[@thumperbangin2000]

Any rubbing issues w them 30s ?

[@j.d.mcdonald]

Do you have the part number for the tiger tail, I've never seen it attached like that where you can keep the 2 inch receiver.

[@MainvilleATV]

Give dirtylife.ca a call, let them know you want what the mainvilles have

[@j.d.mcdonald]

@@MainvilleATV thank you!

[@aidenmckillop4721]

Would you say it sounds a lot better in person?

[@MainvilleATV]

Definitely. Also, since this video dirtylife.ca got us the latest quiet core which smoothed it out and it sounds even better. Highly suggest it. Just tell dirtylife you want to look at what mama bear has. :) thanks for watching!

[@MainvilleATV]

She has the quiet core in for our latest series if you want to hear the difference.

[@lucasfromdavalley]

Yes 100% even stock these bikes sound pretty mean, lots of backfires, pops, and crackles

[@ryansmith6037]

Anyone else notice the blue smoke

[@antprice2012]

Sounds awesome two bad rides

[@MainvilleATV]

Thanks buddy! Feel free to share your on our facebook group :)

[@antprice2012]

Ok might get wife to put up there after i get a arms put on and tires lol i dont do social media youtube is it for me lol

[@weldweld5629]

Sounds great. What brand handlebar grab bar do you use?

[@MainvilleATV]

Powermadd from Dirty Life.

[@leorodriguez3252]

How do you like that tiger tail? And also that bracket are you using to have the tiger tail and tow hitch at the same time?

[@MainvilleATV]

Best thing I ever bought. Only down fall is you have to pull everyone out lol. Got it from dirtylife.ca

[@markminyard4874]

Nice! I like it 👌

[@MainvilleATV]

Thanks mark!

[@nicholasmitchell3269]

Where do you get it at

[@OFFROADDAN]

Hear the sound of the r2 racing tip?

[@MainvilleATV]

Not in person, but videos were neat!

[@OFFROADDAN]

Mainville ATV and Outdoors sounds 100x better In person!

[@jessepoorman2621]

Is that with or without the quiet core??

[@MainvilleATV]

Without! Thanks for watching!

[@dominickguerra189]

After watching this I wanna do my 2015 grizz. Is it ridiculously loud now? lol

[@MainvilleATV]

It really is.

[@OskarDanielsson]

Nice vid 👌🏻

[@MainvilleATV]

Thanks buddy!

[@dBJack]

Hello you can tell something about your winch of your friend Kodiak thanks for the info.

[@MainvilleATV]

3000lb warn winch.

[@dBJack]

@@MainvilleATV Cool😎✔ and those on the back. How attached is that I am most interested in where to buy it

[@dBJack]

TigerTails AAAAA ok

[@critical_boost]

Your wife looks wonderful!

[@xmrmudninja1165]

Great vid live the channel bro

[@MainvilleATV]

Thank you!

[@izom]

so kodiak cass will be faster and louder thenever !?? ;- ()

[@MainvilleATV]

You got it! Haha

[@mirandayoung125]

sounds gd i might consider swapping out my hmf for one of those bad boys...thnx for the vid

[@MainvilleATV]

I cant speak for hmf but the rjwc is a nice unit! Thanks

[@canadaplace2be176]

U want to spend. 1000$ for muffler

[@KoolMada]

I personally wouldn't waste my time with a slipon. You're better off with a full system if you're going to tune it. I would also install a hotcam with that engine.

[@kenstv1415]

New subscriber

[@MainvilleATV]

Welcome to the channel buddy!

[@kenstv1415]

@@MainvilleATV cheers!

[@evanegnatis1042]

Did you need the tuner to run with the exhaust?

[@MainvilleATV]

Always tune, especially when adding an exhaust.

[@SuperKax3]

Great job Kas Yamaha is the best. Always have shit tickets with me on the atv. Great video guys be well eh.

[@bradenmuise8423]

How much louder is it?

[@MainvilleATV]

Somewhere between Tommy gun and ear piercing. We measured it at 100 plus db

[@jbrap7198]

I want that bike 😭

[@sweatlodgegarage8195]

HOW MUCH FOR THE RIMS

[@MainvilleATV]

Already sold, sorry!

[@SuperKax3]

👍🏼

[@Waynerebelrider]

👍📽

[@canadaplace2be176]

Mainville. U making u own name now for Yamaha.. no no. Just same 700 not much to see but. Its not right how fast u go. But a bush buggy. Ya. Relocated rad. Hummmm not needed.