Ro Plant Backwash and Rinse Process Routine Cleaning Process to protect Ro Pump and Ro Membrane

Ro Plant Backwash and Rinse Method Routine Cleaning Process to protect Ro Pump and Ro Membrane
By
SATYA NEER
www.satyaneer.com

[@atulsutar7610]

Excellent method of learning , thank you sir

[@SatyaNeer]

Thanks Dear

[@kiranyadav5008]

Thank you sir ☺️

[@SatyaNeer]

Welcome

[@umashankarkhobare2599]

धन्यवाद 🙏

[@SatyaNeer]

Welcome

[@RahulBangwal]

Sir auto me karne ke bad band karne ka kya prosess h

[@SatyaNeer]

There should be a button to change mode in between manual and auto in your panel

[@akashmathur589]

Sir teeno filter ko 1 saath back wash rinse kar sakta hai kya

[@SatyaNeer]

No Sir

[@parichaybiswas595]

Sir do we need to stop the raw water source and then move the mpv?

[@SatyaNeer]

Yes Sir for safety it is recommended

[@parichaybiswas595]

@@SatyaNeer and then again start the source water for backwashing or rinsing? And then stop it again to move the mpv?

[@SatyaNeer]

@@parichaybiswas595 Yes this is the process

[@subhendunayak2170]

Sir ro antiscalant kitna ML dena he

[@SatyaNeer]

Depends on the water test report

[@skismail7391]

Sir softner ko salt recharge kaise karen

[@SatyaNeer]

Step 1. Set MPV Lever on Regeneration Step 2. Dissolve salt in tank and insert regeneration pipe into tank Step 3. Start softener and recharge will starts

[@ChhotanMandal-g8d]

Kitna der ke liye chalana hai sir ji

[@SatyaNeer]

@@ChhotanMandal-g8d check water till clean

[@संघर्षयोद्धामनोजजरांगेपाटील]

Ye Jo tin hai isme kya kya hota hai

[@SatyaNeer]

@@संघर्षयोद्धामनोजजरांगेपाटील Sediment Filter / Carbon Filter / Iron Remover

[@dialysistherapist1618]

CAN YOU PLEASE MAKE A VIDEO OF SALT PROCESS IN R.O....

[@SatyaNeer]

You mean the recharging process in Softener?

[@ujjwalchaurasai2292]

Dosing pump se kya hota hai

[@SatyaNeer]

Whenever you are required to add some chemical for specific uses in the system, the dosing pump is used to add chemicals.

[@ujjwalchaurasai2292]

Thanks

[@SatyaNeer]

@@ujjwalchaurasai2292 welcome

[@paridhisiteshsinha3640]

Kitny min.tak Krna h.backwash rinse

[@SatyaNeer]

Depending on situations, not fixed

[@niladrisahu9620]

Back wash kitni der Tak karna chahiye

[@SatyaNeer]

Sir depends on water quality, check and do accordingly

[@vikash....9444]

Kitna minute tak karna hai

[@SatyaNeer]

As per water conditions, there is no fix time

[@ArmanKhan-jx9ik]

Nice

[@SatyaNeer]

Thanks

[@kakashihatake-mo5jr]

Sir what to do when sand and gravel come out when doing back wash ??

[@SatyaNeer]

Two problems may be there. 1. Your Multiport Valve is doing Malfunction or 2. Your Strainer is doing Malfunction Solution 1. Check by replacing MPV 2. Check by replacing Strainer and Pipe.

[@kakashihatake-mo5jr]

@@SatyaNeerokay, thank you sir

[@darkredgamerz2724]

Sir backwash and rinse kitne minute karna hai

[@SatyaNeer]

Sir normally you can do 2:1 Ratio Like 10 Minutes Backwash 5 Minutes Rinse Also you can check water quality if water is coming in the drain line is dirty then repeat the process.

[@zahidshamim2671]

Wall ko pitna bhi hai

[@subhendunayak2170]

Sir apka no milega kya

[@SatyaNeer]

Please contact @ www.satyaneer.com

[@DineshYadav-mn2zz]

Chemical nahi dalethu kuch hota sir

[@SatyaNeer]

Depending on water quality, if hardness is high chemical use is a must.