Demon 170 Hellcat Magnum Full Billet Drag Suspension - The Results Are CRAZY!!!

[@BrucePierson]

Another step towards completion. When is the paint job scheduled? You'd be one of the best painters on KZbin that I've seen.

[@americanpatriot2.06]

Oh Man! As you were lifting the Magnum up on the lift, I had a flashback of that fateful moment when the other one fell off the lift! Thankfully, the lift is up to standards and this Magnum is safe!

[@512Berlinetta]

I can't get enough of these videos!

[@Junkyard_Dave]

Thanks

[@Skwisgar2322]

To make a single pickup point lower arm for a suspension like this would require basically a complete redesign of the suspension. They make it like that to create a "virtual" pivot point further out from where the arms mount to the upright. It allows them to reduce scrub.

[@Junkyard_Dave]

@Skwisgar2322 that suspension design just like the mustangs ends up being unpredictable and having binding and snap back issues but if anyone ever makes an angle kit they will eventually go to a single point

[@DanzigDemento]

Can’t wait to see it’s track results now! 👍

[@Junkyard_Dave]

Me too

[@4getitmn3]

New Mexico LOVE!!!!!!!!! AS ALWAYS!!!!!!

[@Junkyard_Dave]

Thanks

[@BassManBobBassCovers]

So many useful suspension tips! Thet setup looks great! Super solid and high quality. Should work out amazingly well.

[@Junkyard_Dave]

@@BassManBobBassCovers thanks

[@neilbrown612]

Love it Dave, the ultimate sleeper. As always love the videos, Thanks.

[@Junkyard_Dave]

Thanks!

[@brewaire]

Noice Dave! Looks like you didn't have to loosen the rear cradle bolts at all to get the arms in?

[@Junkyard_Dave]

I did it just drops down

[@resdawgs]

Nice dave..

[@Junkyard_Dave]

Thanks

[@simscoordinator]

Great work as always! God bless

[@Junkyard_Dave]

Thanks!

[@vampyrspawn696]

OMG A Beautiful Dodge Magnum ❤️❤️❤️ Brings bak Memories, She is Beautiful 😍

[@Junkyard_Dave]

Thanks

[@ronaldmoparornocar9590]

nice stuff from direct connection I am sure it was not cheap...lol...great job love it!

[@Junkyard_Dave]

Thanks it definitely was worth it though

[@jonathansatelesdasilva9916]

Hehe Michamo de Jhonattan Satéles da Silva em BRAZIL SÃO PAULO

[@workplayvehiclereviewsbyAlexMa]

Wow

[@judgehastheword9069]

From day one when the SRT8 Dodge Magnum never handled that great. They was ok but not the best. I wanted to ask do you know of a elc power steering kit that is good. I have a 1959 Rambler American Wagon has a straight axle in the front end. When drive with hand controls I just installed power brakes it made it stop 100% better,. Been looking for power steering kit Been asking around for some ideas on a good unit to use??? Was thinking of using electric rack and pinion.

[@Junkyard_Dave]

@@judgehastheword9069 just use a Saturn one

[@judgehastheword9069]

@@Junkyard_Dave i will check on it . Thanks so much.

[@Mark-nl2ld]

Are you ever going to finish the blue magnum

[@cmd7129]

Stuff takes time brother

[@_Haris1904]

Man those rattles and lack of interior really bugs me bad.

[@waynecarpenter1725]

I used to have an 05 Magnum RT. Do you know of anyone who made or adapted a power lift tailgate for a Magnum?

[@Junkyard_Dave]

They have aftermarket rams that you can install

[@1fastm3]

I bought a magnum srt8 and it didn't come with those door moldings. If you get rid of them, let me know or if you know where I can get some. Really want to complete the look of my MSRT8. Thanks

[@Junkyard_Dave]

I'll sell them planned on taking them off anyway

[@1fastm3]

@@Junkyard_Dave cool, thanks. How can I contact you besides here?

[@Junkyard_Dave]

@1fastm3 email it's in the description

[@1fastm3]

@Junkyard_Dave I'm sure you're busy but just wanted to let you know I sent the email 3-4 days ago. Thanks

[@nky500]

U need a diff brace for extra reassurance

[@Junkyard_Dave]

I'll do solid bushings soon

[@lonerangerspl]

Any issue with the front tension arm replacing it? The speedlogix ones caused issues for me and even caused a tear in the k member

[@Junkyard_Dave]

No issues yet but ove only put 100 miles on it

[@lonerangerspl]

Is the suspension a little louder on the front end turning or going over bumps?

[@Junkyard_Dave]

@lonerangerspl it's definitely louder all around even tire noise in track mode but in the lowest setting it still feels nice for daily driving

[@Onimalap]

Awesome stuff but I hope it will not be the gold nugget challenger 50 color after all.

[@Junkyard_Dave]

Its going to be that gold the color has a different flake in it makes it look cleaner in the sun

[@Onimalap]

@ I’ll wait for final result, but I must admit that Magnums had boring stock colors. Fantastic work. Keep it up and congrats on new place.

[@radiums9413]

Are you planning on doing the brakes at some point?

[@Junkyard_Dave]

It has 6 Piston Brembos idk what I would do to them

[@ImpalaJ]

Can somebody drop the link to how he put the hellcat oil cooler on his magnum

[@Junkyard_Dave]

The what?

[@Demonkah]

Dave will you eventually repaint the car? If so, what color?

[@Junkyard_Dave]

The engine bay is the color it's gold rush

[@Demonkah]

@Junkyard_Dave It'll look sick man! A color never seen before on a Magnum, at least not factory.

[@TrustNRuss]

Have to Dave he just gets it done ✅

[@Randy-q5h]

How come you didn't paint the engine compartment before you installed the engine?(Even rattle can black would have been better than yellow, imo).

[@RevM]

He painted it that yellow/gold color because I think the whole car is going to be that color when he's done.

[@Randy-q5h]

@@RevM oh. Ok

[@BrucePierson]

@@RevM Yes it is. Should look outstanding.

[@ericthomasz]

This channel turned into a commercial break. Im out

[@StaredownGames]

They all do eventually. It is what it is. Radio is the same way. Station comes along commercial free, then boom! AIDS.