This Jeep Repair Is Far Worse Than I Could Have Imagined

We're about a week out from Easter Jeep Safari, and there is so much to do to get Hollie's Jeep, Mischief Maker, ready in time! Maybe with a few Monster Energy drinks and some sleepless nights we can pull it off.
#RobbyLayton #MischiefMaker #AutoBody
Subscribe: / robbylayton
1 Frozen Skid Loader & 2 Trucks With Matt's Off Road Recovery + Trail Mater
• WE ALMOST GAVE UP! 1 F...
The Banana Repaint Videos:
Assessing Damage To Matt's Off Road Recovery Jeep
• IS THE BANANA TOO FAR ...
We Cut The Roof Off Matt’s Off Road Recovery Jeep
• THE BANANA GETS PEELED...
Matt's Off Road Recovery Jeep Gets Some Well Deserved Fresh Paint
• THE BANANA IS UNRECOGN...
Will Matt's Off Road Recovery Like The New Paint?!
• THE BANANA IS TWO TONE...
Finalizing Paint On Matt's Off Road Recovery Jeep
• WHAT HAPPENED TO THE B...
Peterbilt 389 Wrecker Body Repair Videos:
Welding A Semi Back Together With Plastic! (Part 1)
• (Part 1) Welding A Sem...
Peterbilt In 1,000 Pieces Will We Ever Get It Back Together?? (Part 2)
• (Part 2) Peterbilt In ...
Reassembling The Wrecked Peterbilt 389 (Part 3)
• (Part 3) WILL THE SEMI...
Finishing Up The Peterbilt 389 Repair Job. (Part 4)
• (Part 4) WRECKED PETER...
Shop Tour Video:
• Shop Tour & Meet The C...
Recovery Videos:
2 Trucks, 24 Inches Of Snow, 1 Recovery Jeep. A Recipe For Success
• 2 Trucks, 24 Inches Of...
BIG TRUCK, UP HILL, I'D CALL THAT STUCK! First Snow Recovery In The Jeep
• BIG TRUCK, UP HILL, I'...
Failed Recovery - We got STUCK!
• Failed Recovery - We g...
OLD COP CAR ALMOST ROLLS... Down The Hill!
• OLD COP CAR ALMOST ROL...
Buy Robby Layton Hoodies, T-Shirts, Coffee Mugs:
my-store-c51ea...
Please like, subscribe, and share!
Thanks for watching, Daddy loves you.

[@ross7684]

Robby, when Matt first introduced you to us MORR followers, I wasn't impressed. In the months since, you have proved me wrong time and time again. Can't help but respect someone with your work ethic and it's obvious you take pride in your work and I've been subscribed now for several months. You remind me a bit of an uncle who also had his own auto body business and who, though he was a little rough around the edges, worked his butt off to make his business a success; but he still made time for his family. Poor Hollie is going to invest in another rock crawler; Mischief Maker is going to be too nice to take into the rocks. Kudo's to you, man!

[@RobbyLayton]

Thank you I would rather earn your sub then have you do it for no reason!! I’m happy to prove you wrong even tho I didn’t mean to haha thank you for watching!

[@TrailTrackers]

@Ross : I felt pretty close to the same way at first. But every video Robby shows working on this Jeep impresses me even more. This guy is extremely skilled at what he does, and I also love the fact that he's a perfectionist. They are doing a freakin' fantastic job on this Jeep. And the Golden Nugget is coming together perfect as well. People in his area are lucky as hell to have his business there.

[@watcherofwatchers]

IMO, this channel was like most KZbin channels when starting out, and the quality/dynamic wasn't there yet. RLN has improved their videos dramatically in a few short months, and it's now one of my favorites as well.

[@Bierstadt54]

Same; I figured I would just watch the GN videos, but now I watch all of them. Robby and his crew have really impressed me. And I am learning things, which is always great.

[@chrisnaaa3378]

i also came over from MORR and fab rats and the golden nugget. i had the same thing happen. at first i was like is this guy for real or what? i was not sure i would watch this channel. but i like to give everyone a fair shot. since i have subscribed. i am now up to all notifications. i have watched every video. commented a few times. and even watched a few older videos. dinner really seals the deal on this channel for me. he makes me laugh and i love his positive attitude.

[@novavroomvroom6809]

Great job RYKER... you are a natural camera man...!!!! Ohhhhh,, I almost forgot.. HAPPY BIRTHDAY RYKER...!!!!! 🎉🎁📸

[@loc-o5282]

Not only am I learning about the mysteries of auto body repair but you guys crack me up while doing it. I'm glad I sub'd. Came for the nugget, stayed for the LAB crew.

[@lockedin60]

Robbie Auto Adjustment and Re-alignment is way more complicated than meets the eye. I think your explanations goes a long way to show just how you all do things. And adjustments take time. You all need to get in touch with Paul over at Fab Rats. Snap-on Tools showed up at his place the other day. Maybe his contact can help you guys out! 🙄😊😁

[@warrenhassey1293]

That's why repairs cost so much.

[@lockedin60]

@@warrenhassey1293 Yup labor charges can be a bear and in moss cases exceed cost of the parts..

[@BluCappy419]

@@lockedin60 Robby can often be heard humming "It costs so much 'cus it takes me F***ing hours...

[@barotraumabruce4245]

We on the outside have rarely seen our auto body guys do their work. Are most generally as meticulous as you all? It’s impressive!

[@davidayers7796]

Gaurantee you Robbie has a snap on dealer Edit: his "10ft ratchet" is snap-on

[@allanarndt3047]

Hi Dinner a little note on using a tape measure,on that cloth type tape each line is 1/8” then you simply add 1/8” for each line in between each 1 inch line. The longer line in the middle between 0-1” is 1/2”. Then cut half way between the 0-1/2” the next shorter line is 1/4” then the shortest line between the 1/4”-0 is 1/8”. So take for example if you have three lines from the 0” line you have 3/8” ,if you add one more line you have 1/2” add one more line you have 5/8”. add another for 3/4” one more you are at 7/8” add one more you’re at 1” then you start again with the next line after the 1 inch line being 1 1/8” so each line you add 1/8”. With a metal tape measure the scale of measurements changes mostly from 1/8” to 1/16” lines. Some tape measures show an even smaller measurement with each line at 1/32”. The scale of which ever tape you might use is shown between the 0-1” markings. Tape measures can sometimes be a little tricky,hopefully this will help a little? Great video’s!

[@craigjensen7142]

Wow, Holly really beat the crap out of Mischief Maker! Proud to see some of our tools being used to help fix him back up! Excellent work Robby and Crew!

[@jdau2b]

Yeah man I’m not going to whatever grocery store parking lot she goes to🤪

[@CurmudgeonExtraordinaire]

Mall crawling in Utah is some serious business...

[@paulhall170]

Why do we expect anything other than perfect from Robbie and the crew? What's not to love? And late-nite pizza with the crew and the family, outstanding!

[@jamesbigham9036]

Robby I know you and your crew will get Mischief Maker done on time you guys are the best for a reason. I love watching you weld especially how when it is done it doesn't look like it has been welded. Keep up the great work

[@aliceevans3357]

So glad Hillbilly is back, he was sorely missed. Love seeing all of your crew. They are a great hardworking bunch of guys. Great job on the camera, Ryker. Always excited to see a new video. Stay safe and GOD bless

[@flyhead5972]

It looks like you’ve found a cameraman, Great job Ryker! HAPPY BIRTHDAY!! 🎂

[@davedennis6042]

If you sent this Jeep back to the factory for this work, it could not be better. Robby, your work is impeccable.

[@Hanzolio]

Got to visit the Robby Laytons shop today. Met Dinner and Hillbilly. Robby was in the paint booth. Fun to see the Nugget and Mischief Maker in the flesh. Can't believe all the projects you guys have going on. Everyone needs to be more careful and not beat up their rides so much. :)

[@monkeybarmonkeyman]

Glad Hillbilly's back... he's part of the secret sauce that makes this channel good.

[@nix4644]

I love how Robby still gets a kick out of a job well done after all these years of doing this. You could just tell by the way he opened and closed that front door after it was lined up that it gave him immense satisfaction. Two types of jobs are never forgotten...a really bad job and a really good job, we know what list Robby is on. Keep up the good work young man (I can say that because I'm waaay older)😉

[@davidwoermansr]

If you love what you're doing you'll never work a day in your life

[@skyepilotte11]

Robby and crew are the ultimate frame , body and paint experts. Awesome attention to detail.

[@jeeb4x4]

Happy birthday to Ryker! Impressed with your work and idealism! I found a motto some years ago that discribes what you're preaches: "The Bitterness Of Poor Quality Remains Long After The Sweetness Of Low Price Is Forgotten"...😉👍🤘

[@kenc2257]

That spot welding machine is the bee's knees. Mischief Maker is coming along super--that B Pillar work was beautiful.

[@jahmic]

Came here for the Nugget...stayed for the impeccable work that you all do. I come from a long line of "garage mechanics", and have always lived by the rule of not taking my vehicles to get work done if I'm able to do it myself, because NOBODY cares about quality work on my vehicles more than me. Thanks for proving me wrong - professionals can be perfectionists too.

[@wyomingguy4743]

The Layton crew is a pretty good team. Dinner is always around to do what needs done. Fun to watch things come together the way it does!

[@stevebowser7248]

We have a joke in our industry about a rumored employee interviewing elsewhere. Translating it to your industry, we would joke that Hillbilly had "an appointment with Dr. Maaco or Dr. Earl Scheib'. Great content as always. We need a 'Ryker Cam' shout out! 🤣

[@RobbyLayton]

Haha I asked him how his interview went as soon as he came back to work hahaha

[@williamd1891]

@@RobbyLayton Maybe he wants a raise of two power pellets per hour.

[@AFloridaSon]

It's great to see your channel has exploded with subs. Many of us really don't have a lot of interest in body work, but y'all certainly make it interesting. And I've learned I have more interest in body work than I thought I did. *Happy birthday Ryker.*

[@Mick_A_Knuckle]

You and your team are very respectful of one another. Despite all the joking around, the jokes are never at someone else's expense. Well done Robby!

[@randyfender6122]

Like many, I came here from MORR. Watching people get pulled out of crazy positions is fun, but seeing how difficult body repairs are done is fun and educational. I did my share of bodywork when I was young,(before you were born, Robbie), but I never got to put anything on a frame machine, or did anything like the high quality collision repair I see here. The attention to detail, and work ethic is commendable, and I think rare these days. I wish all of you guys the best, and keep the great vids coming!

[@gregeigsti3280]

It's a good thing that you adjusted the door to fit; that is what separates you from the hacks and why your channel is so compelling. Thanks for the great family friendly content and your attention to detail (integrity)!

[@mmoser9483]

I am sure the lady pays you well, to keep her ride is in top shape. And you guys enjoying yourselves while working, allows you to enjoy each day of work. You (should) always love what you are called to do in this life.

[@Mcevoy91]

I was having a shit day. Then I remembered its Wednesday and saw this! Then onto matts and Paul's videos. 🙏Thanks editor for uploading them one after the other

[@robgoffroad]

What makes a great channel is only partly the content -- it's the likeability of the "cast," whether it's one guy or a whole crew. If the people aren't likeable/relatable, even the best content won't save it. But guys like you, your crew, Matt, his crew, etc are so likeable that most of us would enjoy watching you mow the lawn.

[@danhambrick6331]

When done correctly,the safety squint can be just as effective as safety glasses...😁😁👍👍

[@scottbillings3677]

Happy Happy Birthday to my Birthday Mate Ryker!! I've been rocking that date for the past 62 trips around. Enjoy!!!

[@freezinweasle1]

As always, y'all do not disappoint. Your work ethic is commendable. You have great videos that all can watch. God bless and stay safe.

[@johnbouttell5827]

Dear Robby and Team, this video has eveything: welding, pizza and babies. Thank you. Best wishes from John over The Pond.

[@billowney8080]

Love watching the skills. Love the way Robby treats people even more.

[@janicechurchill1639]

Love how you are teasing Holly .. 'I hope we get this done before Easter Jeep Safari'.....👊

[@braxtonnelson7422]

Matt's Off Road Recovery brought me here, and I'm glad they did! This channel is a great combination of informative and entertaining... Thanks for the great content, Robby!

[@doublel7337]

Good to see Hillbilly back to work, I know I missed him. Just an awesome video Robby, you still amaze me and I was a welder and fabricator over my working years.

[@inmyopinion6836]

So, now that Hollie has a "Show-Truck Mischief-Maker" , surly you should make her a set of stunt MM Jeeps. This will lower her stress level and remove her driving inhabitations. Just like in the movies. She can wreck it, and roll it 45 times and have it look perfect in the BFG tent at the next event ! Amazing work guys. Too nice for a RockBouncer

[@alanscott6241]

Never thot MM was in such bad shape! You'll get er. God bless you and your family 👍🙏😎❤️🇺🇸⚓

[@samziarek5114]

I love Dinner. He’s hilarious and just a great guy to watch.

[@morbidmanmusic]

All that's great work from diner, yet can't read a ruler. That man is king.

[@TheIIOM]

Amazing talent, well equipped and quite knowledgeable. Young guys with massive potential and accomplishment.

[@Skiridr22]

Man vs Steel FIGHT !! and the winner is Man Robby you were made for this 😎

[@papalilburn]

Robbie is a perfectionist in his trade! Suggest you do whatever it takes to keep Hillbilly and Dinner on the team!

[@jacobfleetwood4314]

man robbie is there anything you cant fix Legend in my book

[@jrzyboy99]

Robby how about a shirt: Robby Layton Nation….”Slapping your ride back into shape” 👋! Great episode, really puts into perspective the difficult and tedious work that goes in to bringing these damaged vehicles back! 👍👍👍

[@lonhoschar1943]

That certainly IS a lot of work!! You guys are doing a super fine job! That Jeep is going to be BETTER than new!! Holly will be delighted!!!

[@RSB1726]

Love the way you make something bad look so simple to fix. I admire the pride you take in your work, wished more people did. To many in our society want to do just enough to get by or to get the job done knowing that later somebody will have to fix it again.

[@Prospotwelding]

Thank you choosing Pro Spot's i4s smart welder! Glad you like our tool! 💪💪💪

[@Risad007]

The reason you do all this extra work is because your name is on every single piece of work and on the building. Imagine other body shop, they will just do half ass work and get it out. The passion you have for that work is great. Keep up the great work..

[@JoeMama-cl8cm]

Dudes! Now that Hillbilly is back the team is firing on all cylinders! Great respect for you guys. You all know a lot. You’re like a diamond ring in a plain box. Really enjoy watching. Glad I subscribed. 😊

[@robotion]

Like most of these comments have said...I came from Matt's to Paul's and now your channel. Watched a few then subscribed when I figured out that you are very skilled and like to have fun. You have a great crew. Best episode so far was the parody of a "Matt's recovery" with Little Lizzy sleeping!!! Laughed my butt off!! Would loved to have seen her reaction!! Keep up the good work, can't wait for the Charger episodes.

[@lcampbe7]

Was never really interested in body work etc... but after watching your channel, fabrats and musclerod I really enjoy the bodywork/fabrication process. Makes sense since my favorite tool is a hammer.

[@tcrasey]

Robby, for a guy that looks so young, you have a lot of skill and knowledge! You do a heck of a job buddy!

[@freeidaho-videos]

Good video. Most people have no idea how many skills y'all need to master to do this work. Very instructional.

[@baanjones5910]

I have a ‘72 C10 that needs painting. Love to find someone like you to paint it. 😅 I’m impressed with your work!! 👍🏽👍🏽

[@kerrycochrane3209]

A friend of mine called the small hammers "tap it wrenches" and the big ones were whoppers, but He came from Canada. Nice time watching.

[@darinmchenry4327]

nice to see someone still has pride in there work. Good job.

[@LJC5865]

Hard work wins!.. someone said and i haven't forgotten it. Hey Robbie I appreciate your hard work And a great KZbin channel. Thanks 👍.

[@WhiteDragon689]

Robbie, I like your work methodology and attention to detail. No wonder you are doing so well in your business.

[@Finne72]

What you and your crew accomplish is pure magic, hard honest work, taking no shortcuts, always delivering pristine results, my hat is off to you!

[@wakeup6751]

Great job being a cameraman, Ryker!!!

[@qotyit1655]

Great content with some hilarious editing to go with it 🤙🏽. That spot welder is flawless.

[@johnme7049]

Welcome back Hillbilly! Glad you are feeling better.

[@johnkranz4004]

Coming along very Nice Glad Hillbilly is Back in action

[@scottmcclenaghan3236]

Good to see hillbilly back, good crew makes the business run smooth

[@kurtolson627]

Just amazing the newer tools available to do body work these days. Nice work.

[@Bradzuzu]

I'm very impressed with your work ethic Robbie , it's pain staking to assembly to test then dismantle only to re-assemble again and test , atleast the door drops on but I could tell you where getting tired :) time consuming hard work it is....!! It's also nice to see the fam and your little boy , mines 12 already and tell your odler son he did a great job with the camera ...

[@angushoover8670]

Year's ago I thought body/paint shops were crooks. Had my first vehicle and it needed work. So after it being in my garage for 3 months, I finally had it finished. Needless to say, I now have no problem paying a professional. LOL I ended up spending more on parts, supplies and tools, then the original quote. Now I work on projects for the fun, not necessity. Kudos to RLN for OCD professionalism.

[@JJPHAT777]

I started watching Matt's Off Road Recovery which led to Fabrats and now your channel, then subscribed to you all, so I've been playing catch up on Ed's LJ20. Have you and Fabrats ever collaborated on a project yet, like a combined vlog? It would be really cool if you got together on the rollback project. BTW...hello from Nova Scotia! :- )

[@davidwoermansr]

Fabrats have done stuff with bleepin jeep Matt and trailmatter

[@DavidLee-yu7yz]

Happy birthday Ryker, have a Great Day from the UK, and you have a talented and Hard working Dad, seriously i love the videos Robby,

[@Skiridr22]

Someone is going to get fired, Ryker is doing a stupendous job panning and zooming in on point, I recommend a raise 👍🏾👍🏾👍🏾

[@kennithompson2398]

Wow! Robbie, you are so great at this! Holly is going to be blown away. Hill Billy glad you are feeling better and back at it. Can't wait to see this jeep put back together and see the Nugget all painted!! Good video, good job! Blessings!

[@jerrycorbett7294]

Love you're videos. I can't believe how you take the time to do it right when you know it's a rock crawler and going to get banged up first day. And for your age your talent is amazing. Keep up the great work.

[@RSTurbo-gx6pe]

Robbie I took autobody in college it’s so fun I wish I would have stayed with it. Love your videos big fan of you guys you guys do amazing work

[@dalejohnson1555]

MAN!!!! This takes so much patients, not to mention any of the knowhow that is the real magic!!!! You are awesome Robby and Crew!!!!

[@spizike9866]

This is turning into my favorite channel! Thanks for the great content.

[@diamondbkr]

Happy Birthday, Ryker! Great job!

[@rodney1818]

To be honest with you it's kind of redundant sometimes watching people do what I do it's your team that I watch for you guys are awesome

[@sandralutz-rodriguez2864]

Props for Hollie using the MischiefMaker like the beast it is. And major props for Robby knowing how to fix it. Robby your tap-tap-taperoo skills are of the charts amazing. Great camera work Ryker and a happy early birthday buddy! Robby's attention to details is on point! You guys rock!

[@blacktberd08]

Nice to see someone actually adjust the doors my Jeep had a side impact and think either something is screwed up or they never adjusted my passenger door as it’s gap on the top is not right.

[@danrussell3439]

I enjoy that you explain in detail what has to happen to repair he jeep.

[@raymondfraley]

I like the funny edits Robby does, very creative.

[@davidbeers5949]

Robby you got an extra bonus with that new cameraman he comes with sound effects!!

[@andyrbush]

Phew that was exhausting, so much work.

[@jdbrown3695]

Nice job on the pillars! Love your work. Good luck on the timing!

[@e.s.bryant765]

Thanks for the new video guys!

[@LaughingChaos]

I love dinner we need him a lot more in the videos. I know he's in them a lot now but he's a very likable guy much love Dinner.

[@robertrose1098]

Your very impressive at your work !!! I'm loving every minute of your videos guys , Don't change for no one !!!! Your all bloody great character's , your becoming like family and I think this is a key to the big one million subscribers !!!! I know you will get there as you have what it takes guys ,. Love you guys heap's !!! Great content guys,🤪👍

[@darylsmith384]

I'm watching this video on April 2 so Happy Birthday Ryker.

[@kevin-haggerty]

I miss the tools, the jokes, and the satisfaction of completing big jobs like that. I love the channel for many reasons but number one because it brings me back to my 25 years of craziness daily!! Great work guys that Jeep is coming together nicely !!

[@donlum9128]

Good job doing it 100% correct. Looks awesome!

[@dragnfli520]

💙 MM gettin' lots of TLC!

[@mntmantimes]

So funny how you guys all have different senses of humor and compliment each other so well. Hillbilly is the ultimate wise ass!

[@kathyodell5806]

Amazing how a clamp and hammer can move metal, with your very patient everything, Great work crew ❤️👍👍

[@luisnew6738]

you guys do a great job, no one gets frustrated just "getting er done". Hillbillie welcome back. What is Holly going to do with the old rock sliders? I'd love having a piece of Mr. MischiefMaker on my 78 toytota/jeep Wovlverine.

[@BillSprague]

Ya’ll’s welds are things of beauty and your attention to detail: second to none. OSHA? Atlantic or Pacific? Lincoln is just amazing! He’s going to have a great shop in which to grow up. Great video guys!

[@johnnywrjackson]

Exceptionally well presented.

[@joseluera5557]

🤣🤣....I laugh every time he slaps a part he's gonna work on! Love it!

[@videodvdislandspretoria6155]

I love the colour contras between your shirt and the mischiefmaker 7:00 - 7:30 ;-)

[@jeremyfenix8078]

You can see the realization of whats going to be involved in this project slowly begining to dawn on Robby over the course of the video. Lol Another great video guys.

[@r.d.riddle2068]

I know that spot welder was spendy, but what a time saver and the seams look better than factory.