Рет қаралды 396,902
Roborock s7 robot vacuum cleaner roborock s7 features Reminiscent of the previous generation roborock s6 model from the outside, roborock s7 comes with many innovations inside its body. One of the most striking innovations among the roborock s7 features is the vibrarise technology.
Thanks to this technology, the robot vacuum cleaner can automatically perform floor separation successfully.
So much so that while mopping is done with a wet mop on hard surfaces such as parquet, vacuuming mode is activated when moving to soft surfaces such as carpets.
Thus, vacuuming and mopping functions are offered together, providing a high level of cleaning.
Another benefit of this technology is that it eliminates the hassle of the user to remove and install the mop.
Because when the wet mop is on the carpet, it pulls itself up to 5 mm and does not wet the carpet.
Thus, the trouble of removing the mop from the vacuum cleaner and installing it is eliminated and the mop is constantly attached to the vacuum cleaner.
The Roborock s7 has been developed to tackle the toughest stains.
So much so that the smart vacuum cleaner, which has a speed of 3000 times a minute brushing the floors, can overcome the most difficult stains, especially dried ones.
So how is the situation on the carpet side? When the Roborock s7 is going to move from a hard surface such as parquet to the carpet, it switches to vacuuming mode and pulls the mop into it so that the carpet does not get wet.
Then the motor with 2500 pa suction power comes into play and wraps the floor and easily cleans the dirt and debris in the depths of the carpet. On the other hand, unlike the previous models, the lidar sensor takes charge instead of the cameras in the automatic performance of all these cleaning functions of the Roborock s7.
lidar technology using laser pulses; By sending laser beams to the object or surface whose distance is to be measured, it calculates the difference between the time these rays are sent and the time the reflection hits the object and reaches the source again, and can measure the distance.
In this way, a three-dimensional map of the environment is produced.
This means that the roborock s7 maps better than its predecessor and the robot vacuum is much more sensitive to hitting obstacles like walls and furniture.
For an effortless cleaning, all you have to do is give the vacuum cleaner cleaning instructions via the roborock application.
Or, from the app, you can set how often the robot vacuum cleaner will clean the house on which days and times of the week.
So once you set it up, there's nothing you need to do.
In addition, with the roborock s7, you can make your house smell much better with cleaning.
How Does? By adding a broom scent to the water tank of the Roborock s7, you can ensure that the places where the vacuum goes both stay clean and smell good.
So you can get a clean and spacious environment roborock s7 sonic mopping smart robot vacuum s7 features brand roborock weight (kg) 4.5 surmountable obstacle 20 mm height 96 mm number of working modes 2 working time 180 min depth 353 mm suction type wet width 353 mm epa/ hepa filter available usage area flat floor battery type li-Ion color white noise level (db) 67 cyclone filter available water tank capacity (l) 0,45 lt charging time 2.5 hours technology smart navigation dust capacity 0.46 lt other warranty period ( month) 24
MONTHLY CLEANING AND MAINTENANCE VIDEO OF THE ROBOT
• ROBOT SÜPÜRGE TEMİZLİĞ...
MOBILE APPLICATION VIDEO OF THE ROBOT
• ROBOROCK S7 SONİC MOPP...
#roborocks7 #robotbroom