Rock Island Armory VR 80. Quick Takedown and Cleaning.

[@jdc8321]

Thanx Man !! One of the best quick, down and dirty videos of a cleaning a VR80

[@gbrl007]

I recently purchased a new VR80 and found your video informative..good to know what you showed on this video..😎 thanx Brother!

[@himiker]

Thanks for helping me overcome my fear of disassembling, cleaning, and reassembling the gun. Can't wait to try this out at the range!

[@kyle4070]

Thanks for showing me how to disassemble it, some videos the people go so damn fast you have to keep pausing it and rewinding it

[@OldCityVlogs]

Cool, Thank You for the comments.

[@wayneweber3894]

Thank you, I was having a brain fart from the last time I cleaned it… embarrassingly, I put the gas system back on the wrong order🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️. Thank you for a good quick reminder

[@RockyMTNnative]

Dude! Thanks for the nice video, really appreciate it, cleaning my brand new stormtrooper very soon and will definitely reference this 👽🤘

[@Raymond50001]

Exactly what i was looking for. Just a quick not to complicated cleaning video. Love it.

[@alexplascencia9172]

Very good video helped me take mine apart for the first time thanknypu

[@benjibanks7894]

I've been wanting to get one of these for awhile now. That OD green looks nice.

[@michaelb3049]

Hey thanks. Finally a straight forward, no hype, fellow showing the way. I am now more educated. That’s the reason for this technology. Our community is now stronger. Freedom safely

[@mikec9636]

Picking mine up next week. Thanks for the video. Lots of help and yes, ballistol has a strange odor.

[@cgmax9830]

I bought one of these last week and went to the range yesterday and shot around 30 rounds of bird shot through it...it jammed up about half the time, but I took it out of the factory box without cleaning it...I'll clean her up tomorrow and try it again. Great video to show a quick clean, and thanks for the tip about cleaning before heading to the range. It is a sexy shotgun!

[@ericortiz3299]

Use high brass ammo and you shouldn’t have that problem!

[@buckleypeanut7690]

@@ericortiz3299 you gotta break it in with some big stuff 1500 velocity couple boxes and you should be good

[@hubbabubba209]

Hey man I had the same issue with mine the first 3 times I took it out . Give it a good cleaning make it nice and lubed up , get some High Velocity rounds 1300 - 1500 FPS and it should work. I just took mine out again yesterday and it finnaly broke in. Let me tell you ... this gun is fun as f@*# . 1. Give it a good cleaning 2. Get some high velocity (High brass shells) and it should shoot that bird shot

[@carguy0389]

The bolt has a break in period

[@rik4369]

Keep that bolt locked to the rear for about 30 days. This and higher velocity shells are the preferred method of BREAK In. I went through my Tigger Housing with a dremel tool ( soft wheel) . I can feel the improvement of my trigger.

[@JamieChapinDamelosJJParanormal]

i saw the lil bit o crazy in your eyes when you said how much fun it is to shoot :) :) thats freakin beautiful!!!

[@jasoncurrie6701]

Just picked up mine today. Freaking love it....

[@tygur23]

Such a great color

[@Al-mu4ff]

Thanks informative video, just got mine today.

[@anthonyclay7210]

Thanks brother, appreciate the video, for those of us that new, all of these videos are truly helpful!

[@OldCityVlogs]

Thanks for the the comment and checkin it out. you're gonna have good times with this one for sure. Once it gets purrin its a blast to shoot.

[@bobfentzlaff8115]

Good video , clean and simple not spotless but servicable!

[@buckleypeanut7690]

something tells me he likes metal !!!! hahah good video

[@Tony-vo5vs]

Thanks for the video.

[@frijoleapapi1]

Appreciate the guidance my man

[@Smitty-J]

For char/ burn marks use Mothers mag & aluminum polish works great.

[@toncatboy]

I'm watching this getting my VR 80 ready to blast at 12 tonight to bring in 2021!!!!!

[@hegemondtm]

Thanks for video.

[@SheitlQueen]

thanks for the video!

[@madbros-r-us4549]

Bought mine and the grease and oil stiffened up the bolt too much and made it impossible to send home. Needed a video like this to follow so I can clean it before first range day.

[@izladoom]

Took mine out for the first time today we cleaned it and oiled it up before shooting it at first it wouldn’t cycle at all but after about 30 rounds it started working good we was just using some cheap federal ammo so I think that was the problem

[@llwizzoll]

Nice video

[@llwizzoll]

Cleaning mine today

[@akajd5907]

👍Hey Old City Vapors were can I find that OD Green Cerakoted Upper/Lower Receiver VR80? Where did you purchase yours? Awaiting your reply. Informative video. Thank you sir. 🇺🇲Stay well. Go in peace.

[@OldCityVlogs]

I just happened to walk in my local gun shop here and they were just unboxing a few of them. A Black, Tan, and Green one. I went in to by a box of 22's and walked out with this one. I haven't seen anymore since then. If I do see one I'll let ya know where it is.

[@akajd5907]

@@OldCityVlogs how bout a model # or UPC #. btw what state do you live in? Thanks again.

[@OldCityVlogs]

@@akajd5907 FL here heres a link to a few different colors but i dont see the green grabagun.com/rock-island-armory-vr80-shotgun-white-12-ga-20-barrel-3-chamber-5-rounds-with-two-magazines.html palmettostatearmory.com/armscor-vr80-tactical-12ga-5rd-semi-auto-shotgun-sniper-green-vr80-sga.html

[@akajd5907]

@@OldCityVlogs Thank you for those links. RIA calls it "Sniper Green" VR80-SGA. Here's the link I found for the lowest price, problem is they're out of stock like everyone else. tooeleshootingsupply.com/shop/armscor-vr80-12-gauge-semi-auto-shotgun-20-barrel-3-chamber-5-rd-magazine-sniper-green-synthetic-tactical-stock-rock-island-vr80-sga/ Waiting it out. Probably the "Black" VR80 will come in stock sooner because of more offerings, in that case I'll get one, disassemble the upper & lower and Cerakote it OD Green. 💪Take care OCV.

[@DizzyDave26]

I appreciate your video brother. This rifle is so amazing, so fun. I noticed you said you shoot slugs, I just went thru the manual and it says NOT to shoot slugs, anyone feel free to reply with recommendations on ammo used, how does it handle reloaded shells? Just looking for some input so I can learn this thing more with some background

[@joshuaamendoza5084]

My model came with multiple chokes and two of them can run slugs

[@toncatboy]

Mine came with 3 chokes, but in the manual beside 2 of the chokes it says Do Not run slugs in RED writing. Only the 3rd choke with 5 stars named "cylinder" you can use with slugs. I shoot slugs at the rifle range. Get extra padding for your shoulder when you do!!!!! You can google the instruction manual and download it in pdf format. I keep it on my phone for a reference.

[@alextostado5524]

how do you take off the muzzle so easy I try and mine is like stuck

[@carguy0389]

Thanks for the video man! Very simple to follow along with. One question though, why did you not take out the bolt while you were cleaning it? Is there not a reason? Just curious. Thanks again!

[@rik4369]

The Barrel must be removed in order to get the Bolt Carrier out. There are two Allen screws ( stacked on each other) that must be removed. It can be scary for new gun owners. JUST USE THE RIGHT SIZE ALLEN BIT.

[@JamieChapinDamelosJJParanormal]

nice!

[@charlesjacobs5140]

Is this the same for the VR 70

[@StaceLopez22]

🙏🏼🙌🏽👍🏼😁

[@e2sealoperator561]

Why didn't you take the bolt out

[@ludacris0614]

I have the storm trooper I've broken mine to the firing pin

[@ericchatman7220]

My VR80 is black but it looks ashy

[@beybulatozden9508]

This is Derya vr80. Not ria

[@ronniebowers1241]

I am thinking about starting my u tube and expose these so call experts

[@OldCityVlogs]

You absolutely Should do that.

[@ronniebowers1241]

To late I am out