Roco Z21 using Digikeijs DR4088RB to show tracks occupied by locos.

[@gertmeering6270]

Thanks for the vid , i have 2 sections in my block ... so 2 wires instead of 1.Is then the input two instead of one or ???

[@pampaw94]

Hi, can you show how to connect corretly with z21? Thank You

[@filipstevens6263]

What is still needed to program changes with roco z21 white version, the system is difficult?

[@JorgenPersson-jo4sc]

Hello! I want to know if the R-bus only shows that track is occupied or if it´s also prevent train collisions? I mean does it stop other trains from entering occupied block?....or do you need a computer program to have that function?

[@DCCtrainautomation]

Jörgen Persson you also need software to stop the trains. As it is here all it shows is the loco is there.

[@JorgenPersson-jo4sc]

Ok thanks!

[@gostadahlgren8559]

Great and pricey tool!!

[@DCCtrainautomation]

Yes this works with the white one to yes!

[@linusjarnbjer3740]

+DCCtrainautomation Brilliant, thank you! :)

[@linusjarnbjer3740]

Will this work together with the white z21?

[@DCCtrainautomation]

What do you mean correctly? This does work.

[@pampaw94]

+DCCtrainautomation I don't understand how to connect module to z21 and to the rail. Can you explane me? I'm new about that Thanks

[@DCCtrainautomation]

+Davide Panarese The way it conects is you use a R-bus cable from the Z21 to the DR4088RB Then one rail on the layout is common. The other rail the feedback one is isolated were you want a section. The feed from this goes back to the DR5088RB. The DR50088RB is also feed with that same track feed from the Z21 to the common i the middle.

[@pampaw94]

+DCCtrainautomation Could you take a picture of all connections? PS: connectors named "C" on DR4088RB is not used?

[@thomaswiesner3096]

C = Common , the track not isolated, then the isolated sections goes to 1 - 8 ,

[@josepbrun1433]

Like getting DR4088RB response is a pulse and not stay active? I have this problem and do not know how to fix it.

[@DCCtrainautomation]

What setting have you put in for glow?

[@josepbrun1433]

Forgive'm newbie, I did not put any value I've logged as received. I understand that through the program to manage z21 I have to enter any parameters?

[@josepbrun1433]

+Josep Brun sorry my English is poor ...