Rode Wireless Go II | Complete Record Settings Tutorial

[@samgjdavies]

The best tutorial I've seen on the WG2!

[@GaryDmedia]

Thanks Sam, I appreciate the feedback.

[@majabosnic3211]

Agreed! Thank you so much!

[@cuocsong.menthuong]

Thank you, the video is very straight to the point. I was struggling with my RODE for hours and I could finally record after 2 minutes watching the video!!!

[@GaryDmedia]

Great to hear. Thanks for letting me know.

[@befe_burglinster]

This is a very good tutorial. Calm comments, not overexcited like many others. Easy to follow.

[@GaryDmedia]

Thanks, I appreciate you comments.

[@170cuda]

Best tutorial for the Rode Go II. Thank you!

[@GaryDmedia]

Thanks for letting me know. I hope to update it next year.

[@markclarisse01]

Awesome video Gary. Very clear, concise and to the point without fluff. These W-Go2’s are amazing

[@GaryDmedia]

Yes Mark, I agree. 👍

[@voormekaar]

Thanks Gary for the patience and clear explanation! Calm and clear, love it.

[@GopalRaju]

thanks mr gary...you solved my rode mic, puchased last week, setting probs.....

[@GaryDmedia]

Great to hear. Thanks for letting me know

[@oskachau]

Have a wedding shoot tomorrow and this was super helpful! Thank you 🙌

[@GaryDmedia]

Really glad it was helpful, hope your shoot goes well Chau.

[@SwedishGlobetrotter]

Absolute the best review for this device and I have been looking on 15 different vloggers videos. The manual that come with the WGO2 is rediculus. Then I found your video. Just amazing

[@GaryDmedia]

Thanks for the feedback Swedish Globetrotter. I appreciate you taking the time to comment. I’m glad the video was helpful.

[@beyondthebeats7852]

Excellent video! You provided a lot of helpful information. Thanks.

[@GaryDmedia]

Thanks, I’m happy the video was helpful. Stay safe.

[@StressLessCamping]

Got these mics for our videos and podcast production as well as live streaming. They're great but made significantly more so by this outstanding and well-paced explanation of the features and controls. Thank you for making a great product more so.

[@GaryDmedia]

Thanks for the feedback Tony and Peggy. Great to hear the gear is working well for you.

[@antoniomartinezcomedy2673]

@@GaryDmedia do you have any advice on the wireless go 2 for far sounding audio I recorded an interview and my mic sounded far when the guest sound close

[@2brosAU]

Simple and helpful! Cheers Gary!

[@GaryDmedia]

Glad it was helpful.

[@NateMoller]

Great tutorial! Thank you. Looking forward to using these mics more for my recordings and client recordings.

[@LucyLeheilleix]

Very clear and concise video. Thanks very much.

[@GaryDmedia]

I appreciate you letting me know Lucy. Thanks.

Very complete walkthrough, thank you. Best video to know the settings.

[@GaryDmedia]

Thanks for the feedback, glad the video was helpful.

[@independentballerina]

How lovely and simple you are explaining :) ı was so confused but now everything is so clear :) thank you for sharing :)❤❤❤

[@thehamstabone]

You are a phenomenal teacher! Thank you so much!

[@GaryDmedia]

I’m glad the video was helpful. Thanks for your feedback.

[@LifeOfDeAnt]

OMG THANK THE LORD 🙏🏾🙏🏾🙏🏾🙏🏾

[@Bugsliiiife]

Seriously!😂

[@matafilms]

Rode, a batch export of the transmitter recorded files would be fantastic!

[@GaryDmedia]

That’s a great idea Mata Films, it would be worth commenting on Rode’s website to make the suggestion. They do take feedback seriously.

[@AnilKumar-zo2eu]

Thank you so much sir for your packaged information

[@JacksonAcesMagician]

Gary your videos are just fantastic! Thank you so much

[@GaryDmedia]

Thanks Jackson, I appreciate your support.

[@englinesian6383]

For the price and features it offers, this is unbeatable. I’m waiting this to be officially sold in Indonesia.

[@GaryDmedia]

There are a few different brands that do similar things but I must agree that the wireless go has all round the best features.

[@englinesian6383]

@@GaryDmedia At least for its capanility to be applied as audio interface

[@GaryDmedia]

Yes it does, something I am yet to experiment with.

[@yonleiby]

Good job

[@richieabel4070]

Great video, very easy to follow - thankyou!!!

[@GaryDmedia]

Thanks Richie, I appreciate your feedback.

[@piusgyagenda]

This video is so detailed and straight to the point Love it, thank you so much

[@AutoHeadz]

When I record I can only hear the recorded audio out of my left head phone; setting are set to “merged” Please help.

[@dragonflymedia3979]

Excellent video Garry, so easy to follow, thanks

[@GaryDmedia]

Great to hear. Thanks for your feedback.

[@dandyfunhouse]

Thank you! I only use the recordings from the transmitters and never use the receiver (at least not yet) and have been having an awful time with the levels peaking and couldn't figure out how to lower the sensitivity. I just now turned on PAD and hopefully it will solve my issues going forward.

[@GaryDmedia]

That’s wonderful. I’d love to hear how you go. Yes the pad maybe the answer.

[@dandyfunhouse]

@@GaryDmedia it was still bad. I have peaking like crazy with it about a foot from my mouth. It's fine for normal speaking, but doing high energy announcing, I'm blowing this thing out. The worst part is that you don't know what you've got until playback which you can't do until you export. I'm sure if I get it farther away I'll be fine but it's definitely an experimental process. Maybe if I use the windscreen.

[@taghappytv]

@@dandyfunhouse I have been in contact with Rode regarding this issue as I find the input signal very sensitive. In short, they said Pad only drops the input sensitivity by -4db. What's unfortunate is if the audio clips on the way in any sort of safety track or low gain setting on the receiver or camera is void as the clipping is already in the pipe line. Rode said they'll pass the feed back on however I wouldn't hold my breath as to whether they'll impliment gain control at the transmitter level. The only way around this it to use a Pad attenuator between the mic and transmitter to pull back the gain. This is a shame as this issue alone completely ruins a great product. Who wants to risk clipping audio.

[@DandyDoesIt]

@@taghappytv Thank you for digging into this. I have recently added the rode go lav mic with excellent results and exporting in 32 bit float instead of mp3 has appeared to have cleared up the issue. But I have only done one project since making these changes. It may simply be the 32 bit float export solving the issue but the lav mic sounds so good I'm hesitant to bother doing anything else. I'm not seeing any reason to record to the camera at all these days unless shooting from a great distance which I never do

[@Bugsliiiife]

THANK YOU!! This was amazingly put together🙏and helped a ton

[@salvagedroots4215]

This video was great and so helpful!

[@FilmbyCLOUD]

What a detailed review. Thanks

[@GaryDmedia]

Thanks for your feedback Cloud Films. 👍

[@MrSnooooze]

Yeah WoW Garry great Video, and yep, coz of this one. I love our GOii's BUT.... I wanted to record so abience at a shoot at a couple of the waterfalls and both mics turned on, with Lavs connected thinking they would record to themselves without being connected to the receiver. They are (all) on the latest firmware and set to "Always" but they (both) failed to record! perhaps they need to be connected to the receiver (seems ODD)...testing needed...Thanks for your videos, I'll start looking at more of your content.

[@GaryDmedia]

Peter that is weird. Sorry to hear you have had trouble with yours. You may find a dedicated recorder like the zoom H1 pro would be a good investment for tasks like that. Much more versatile and good visual Monitoring ability.

[@MrSnooooze]

Thanks ​@@GaryDmedia I have the Hn4 but it's not in the every day carry kit...it will be when we return to finish the shoot. ​

[@GaryDmedia]

Awesome. Sounds like you got it all sorted. Thanks Peter for dropping in to say G'day.

[@simplevideos7]

Thanks for the great video how do you delete multiple files in the Rode Central.

[@MiszPosh]

Awesome tutorial. Please What quality is selected by default in always record mode? Uncompressed or compressed?

[@GaryDmedia]

@MiszPosh

[@GaryDmedia]

@MiszPosh The quality of the audio is set in the Rode Central app. Whatever you choose, irrespective of whether it is Record always will be the type in the app. Hope that helps.

[@LifeOfBD]

GREAT Explanation! Thank you!

[@GaryDmedia]

Glad the video was helpful, thanks for the feedback.

[@ChadTownsend10]

What is the best settings for Gain mode on a sony a7iii camera? What dB would you recommend? etc thanks

[@GaryDmedia]

Sony cameras have a more sensitive audio input. I would set the receiver output to half way. You can always raise it if needed.

[@clarke.inverary]

A few questions: 1. How do I export all the audio at once? 2. How do I export the Timecode metadata to text file? 3. how do you autoname the files by date time and seconds created? If you can't do it these features would be useful to have in the rode central software.

[@GaryDmedia]

Great questions Clarke, future updates may give the option to select individual files or multiple files for deleting and exporting. At this stage it is not available. There is no usable sync timecode with the file apart from the time the file started to be recorded. No way to export this time with file. There is no option yet to adjust file naming method. Just have to wait I think Clarke. I’m looking forward to an app maybe to manage this from my phone.

[@clarke.inverary]

@@GaryDmedia Hi Gary, thank you for the quick reply, hopefully they can deliver these features with an update, currently this is the only thing stopping me from purchasing another unit. we are counting on you to give this feedback to Rode, don't let us down.

[@gabrielaudiovisual]

Thns for the answer, Devies! I can't manipulate the gain, also can't switch to merged pressing both buttons together. That's why I thought the button was locked, but I don't understand how can I do it (lock/unlock) the mute button from the receiver.

[@GaryDmedia]

Gabriel, you are not able to change the button functions from the units on their own. You change the functions by using the pc or mobile app.

[@SophiePeterActing]

Great Tutorial! Thank you...

[@GaryDmedia]

Glad it was helpful Sophie, thanks for letting me know.

[@wtpaige]

best video, thank you so much!

[@rommelreyes7616]

Thank you so much!!!! So helpful!

[@GaryDmedia]

Glad the video was helpful.

[@NetanelColish]

Thank you!

[@GaryDmedia]

Glad the video was helpful Nathan.

[@PaulThorpeOfficial]

Hi Gary, using just one mic, my viewers report a strong left sided speaker bias? Do you know why this is happening? Would appreciate any tips. Thanks.

[@GaryDmedia]

Paul, I wonder if the safety track mode is activated. This will record one track a lot lower than the other.

[@PaulThorpeOfficial]

@@GaryDmedia Bless you thanks Gary I will check that. Cheers.

[@PaulThorpeOfficial]

@@GaryDmedia Seems to have worked mate. Thanks so much for answering my question so quickly. Subbed!

[@GaryDmedia]

That great Paul, I very happy it worked for you. Enjoy your filming.

[@NadineMMedia]

Thanks, Gary. This is great.

[@GaryDmedia]

I appreciate your feedback Nadine. Thanks.

[@ArtyomPersidskyTube]

Hi there! Can you please help me. When I listen to my backup files they appear to be in a very low volume. Do you have any idea what's going on?

[@GaryDmedia]

The wireless go II is known for low sensitivity. Even so the recording is almost without any background noise so you can lift the gain in editing with confidence that it will be a clear recording.

[@dugsbugs1]

The safety channel doesn't record 2 separate tracks. It sends the stereo track to the camera or recorder and one channel will be 20db lower, which then gets separated in post. As usual, Rode didn't explain this. It would have been more practical to have 2 recordings on the transmitter to choose from but they didn't think of that.

[@GaryDmedia]

Thanks for clarifying that dugsbugs1. I appreciate it.

[@tialynn1111]

Thank you! Can I connect to G7x mark ii w/this?

[@GaryDmedia]

Tia, I checked the user guide for this camera and the G7X does not have an external microphone input. You would not be able to use the Rode WG2 with this camera. You can record the audio separately and mix it in later in post production but this is more work. Hope this helps Tia.

[@tialynn1111]

@@GaryDmedia thanks 4 the research and the reply!

[@MintuBrar]

Hi Gary, Thanks, You made this easy for me, but I have one question how can we delete files from the transmitter? Or will it overwrite itself after the end of storage?

[@GaryDmedia]

It will overwrite the earliest recordings when it is full. To copy recordings you plug the device into a PC and use a free program called Rode Central.

[@MintuBrar]

@@GaryDmedia Thank you so much

[@adrianallen8874]

Thanks for this Gary (im very new to audio) ive got 3 different cables to connect to my i-phone WTF i will get the SC 15 cheers

[@GaryDmedia]

So many cables! HaHa.

[@befe_burglinster]

Hello. Thanks for your very instructive tutorial. My question: how can I delete an audio file from the device? Thanks.

[@GaryDmedia]

Thanks for your feedback, I appreciate it. At the moment there is only one way to delete files, and that is totally. This may change in the future. Remember that once the memory fills the oldest recordings will deleted first. So it is always a good idea to copy across the files you need after each shoot. Hope that helps.

[@delfinojuarez4821]

Please share the link for the cool small black 4 port usb charger.

[@GaryDmedia]

It is simply a 1 in/ 4 out USB hub. Nothing special. Just plugged it into a high output power supply like the one that came with my iPhone.

[@brianroth5754]

Thanks for the tutorial mate! Question I have is my transmitters are not recording internal audio for some reason. I have them set to always record but when I plug them into the Rode Central app it says no audio recordings available. Any idea whats going on? Potential bug?

[@GaryDmedia]

The first thing I would do is download the latest firmware and update both the receiver and transmitters. If there was a hardware fault it would only be with one transmitter I would think.

[@defjam3079]

Do u need an iPhone or computer to turn recording from “always” to “off” or is there something u can press on the receiver directly? And is there a way to know if the device is recording while the transmitter is off?

[@GaryDmedia]

When the transmitter is switched to always on, you have to use an app to access the function switch. No physical switch will do it. The always on recording stops when the transmitter is completely switched off. There is no indication other than the screen going blank.

[@DRKHALEELVLOG]

Good information

[@GaryDmedia]

Thanks, I appreciate you letting me know.

[@DRKHALEELVLOG]

@@GaryDmedia I brought go 2

[@GaryDmedia]

Good choice, keep your eyes open for future firmware updates for the Go 2. I think they will make the setup even better.

[@DRKHALEELVLOG]

@@GaryDmedia tanx.how to update firmware

[@carobnadezela6638]

Thank you, very good tutorial... :-)

[@GaryDmedia]

I appreciate your feedback. Thanks.

[@sergey_sovetsky]

Thanks!

[@GaryDmedia]

I’m glad the video was helpful.

[@FinLineFly]

Great video but please i need help. How do I delete recorded audio files from the devices? Rode help says hit the delete key on the keyboard but it does nothing. It's driving me crazy. What am I missing? Thanks in advance!

[@GaryDmedia]

Just checking if you have the very latest firmware update for your equipment. Rode has updated the Rode Central App. Much more features available for moving, deleting files etc.

[@FinLineFly]

@@GaryDmedia hey thanks for the reply. Yes I have updated to the latest FW. It seems there is a bug in it because it is impossible to delete files

[@Jesus961049]

if I use the backup in the app, each microphone saves what it recorded individually, or it records both on a single track??

[@GaryDmedia]

The recording in merged setting records to a single mono file. That is, 2 channels, left and right with the same mixed recording. In stereo, you will get a single stereo file with one mic recorded to the left channel and the other to the right channel. Hope that helps.

[@kervi]

This is very enlightening :)

[@GaryDmedia]

Thanks for letting me know. 👍

[@Wild_Housegh]

What setup would you recommend for outdoor recording ?

[@johncorry1353]

Hello Gary - we corresponded months ago right after my purchase of W-Go II and you and your tutorials were/are very helpful (and generous replying here on Comments all the way between Australia and Canada time zones!). Q: (on iphone 6 & 8 with analogue cord) I have my receiver Gain Mode and Gain set at Course and High, but an outdoor shoot this morning (Rode Lav Mic, very little wind) was a little at the top end close to distortion at moments. If I adjust to 'Mid' Gain will that give me less Mic input recording levels? I tend to project a little too much and have to remember I'm not teaching in a classroom (I lead seminars 4 times a yr for my RMT Peeps). Btw I'm also employing FilMic Pro by your lead! Photography hobby background is helping accelerate that learning - I botched some of this morning's focus as I should have locked it in 🙄). Appreciate your time very much - John.

[@GaryDmedia]

John, so good to hear from you again. Totally understand the projection issue. It’s hard to get into your mind you don’t need to speak to the back of the class. The latest firmware update added the option to add an input gain PAD. This is the instructions from the website: “To activate the pad, simply toggle the 'Pad' button in RØDE Central. You can also activate the pad from the receiver by selecting the transmitter using the pair button (‘∞‘), followed by a long press on the ‘dB’ button. Note: a short press will activate the mute function, so take care to hold the button until the pad symbol appears on the receiver display.” I think that will help lower the sensitivity of the lav mic. Lowering the output of the receiver will not fix distortion caused by high input into the transmitter. If that isn’t enough you could fit your mic under your shirt fabric. Hope that helps.

[@Pretear521]

The recording set to Backup actually happened to me, the Tranmitter unfortunately didn't get turned on, lost my audio :(

[@SpencerMFJames]

Hey Gary, is there absolutely no way to manually delete files from the transmitters? I've tried everything and have had no luck at all

[@GaryDmedia]

Spencer, just wondering if you had any luck deleting those files since you made this comment. You may need to delete the Rode Central software and reinstall the latest version. You should at least be able to global delete.

[@TroyBrophy]

There's no settings associated with the TX device. Brand new Rode Wireless Go II, just updated the firmware with new install of Rode Central.

[@GaryDmedia]

That is odd Troy, is it the same for both transmitters? Does the device settings not show up on the mobile app or PC version of Rode Central?

[@gos2011]

Hi first thing you made a great video i use my microphone the receiver directly connected to my gh4 camera with the audio cable but it has a huming sound like a electrical induction I tried many cables and many things and I cannot get rid of it the only thing that works is a piece of tape to push the cable hard that's sometimes gets the job done do you why is that happening thanks for the video it was great

[@GaryDmedia]

Sorry to hear that gos2011, it sounds to me like you may have a issue with the mic input on your camera. A way to check it is to plug your wireless mic into another recorder or camera and see if you get the same buzz. If there is no buzz then it just may be the input on your camera.

[@GaryDmedia]

Gos2011, I just thought of something else. 2.4GHz wireless mics have a lot of electrical interference around them. The receiver is not only receiving signal but also communicating with the transmitter. It could be that the camera is not shielding this out. Just a thought. You can test this by bringing the receiver close to the camera and then stretching the lead out and getting it away from the camera. Hope you find a solution.

[@antwonwill12]

I am filming a interview and its just one person should turn on both transmitter after clicking merged mode. Can I then mute the second transmitter and let the interview hold on to it or should i keep it with me

[@GaryDmedia]

In merged mode you only need to turn on one transmitter Antwon.

[@edinamotocyklu]

Thanks for Your Help :-)

[@marbth]

Hi, thanks for the tutorial What's app use for rec ? Thx

[@GaryDmedia]

I use the iPhone FilMic Pro app. The rode WGII works in the generic camera app as well Mauricio.

[@BilalQureshi6784]

thanks so much man

[@GaryDmedia]

I am glad the video was helpful. 👍

[@BilalQureshi6784]

@@GaryDmedia One question though, what does the 'db' button on the transmitter do? It shows values like -9db, -12db etc but im not sure what they mean? Thanks

[@GaryDmedia]

On the WGII receiver there is button to step the output up and down. This the output to the camera. You are unable to vary the gain of the transmitter. Using Rode Central you can lower the sensitivity of the mic on the transmitter by one step if needed.

[@FloridaMenendezTeam]

Can you record with the transmitter without turning on the receiver?

[@GaryDmedia]

Yes definitely Renata and Luis. No with the latest firmware update.

[@checkeredflagfilms]

Why doesn't rode give the user the possibility of changing the levels/gain separately? One person may talk louder, you might be recording b-roll with one mic and someone speaking with the other. would be nice to have separate control of each transmitter.

[@GaryDmedia]

Yes it would be good to have greater control. Since the latest firmware update there is a feature that you can select that lowers the sensitivity of the transmitters input separately called a PAD.

[@providerpowermoves]

Hi! Love the video! RODE Central will not recognize my devices. Any suggestions?

[@GaryDmedia]

Sorry for the late reply, just check that you have the very latest version if the ride central app. Open the ride central app. Make sure devices are turned on before you connect them. Hook them up and you should be fine.

[@kpakfar]

Thank you for the great video. With a receiver and two USB mics, can we get 2 separate tracks with mobile or laptop, or do I have a mixed single track?

[@RadjRadjcoumar]

I recently bought them and had a bad surprise while started using them. Please advice me with the right settings. So I use them with my iPhone for video recording along with the recommended lightning USBC Cable. As the plan was to record one person as the subject I used only one of the transmitters and so the other transmitter was not powered on and stored away. Finally When I played a recorded video the sound was fine with my phone and Mac. When I connected my AirPods to watch the same video i noticed that the recorded sound of the video was in mono ☹️. When I extracted the original sound file and analysed using audacity it confirmed me that the sound was mono and not stereo. ☹️ what must I do in the settings to avoid this ? Must I always use both the transmitters ? If I use one what must I change in the settings to have the setero sound file ? Please help

[@GaryDmedia]

Radj, I presume you are hoping to record only to one channel and not merged to both left and right channels. In the settings using Rode Central you have to make sure that the merged selection is not selected on the receiver. Hope that helps.

[@diocletiandondarrion7102]

What does the off setting mean as opposed to always and backup?

[@akilj7751]

Useful

[@garageschooltv]

hello I wanted to ask you but why despite having bought the original rode cable, as soon as I connect it to my android smartphone and video record I only get the audio of the mobile phone? do I have to set something? i tried on three different smarphone and i scaicao lapp rode. thanks a lot

[@GaryDmedia]

It can depend a lot on what app you are using and the type of cable you purchased. It is good to try an app that you can monitor the audio level. Some like Filmic Pro tell you which mic is being used.

[@vincentcuchel8556]

So the Rode Central app only works on a computer and not accessible by on a cell, correct?

[@GaryDmedia]

At the moment that is the case Vincent, they have announced that in the near future they are working on a phone app.

[@PhoebeGarnsworthy]

So helpful Gary! thank you! Two questions please! - Is there a way to trigger new recordings without having to switch the entire microphone off and on? And, is there a way to delete just one recording at a time?

[@taghappytv]

Thanks for the video. I have a set myself. I was wondering what DB recording level the transmitters are on themselves? For example, I turn a transmitter on and have it record a speaker at a wedding with a Rode lapel mic. Does it have a default bit / DB recording level? Or does it reflect the receivers setting (which can change), even though in this example is it still turned off? Thanks in advance. In short, can I strap a lapel microphone to a speaker at a wedding and have it recording cleanly with out clipping? Thanks in advance.

[@GaryDmedia]

Tag Happy, in the WG2 settings be sure to adjust the TX so that it has full gain. That is, don’t switch on the PAD. Even at full input gain you would have to yell into it or sing very loudly to distort the input. Adjustment of the RX gain only adjusts the output going to the camera.

[@kroper3781]

hello sir, thanks for the valuable information. my problem is this; the connected match suddenly broke and no matter what I did, the receiver and transmitter do not see each other. what could have happened? I'm really sorry. Thanks again.

[@TheSanjeevtomar]

Have you increased the audio levels in the post production to make it loud i.e at normal levels?

[@GaryDmedia]

Yes, in post Sanjeev. WG2 has low background hiss so it is very versatile.

[@AnywayHighway1207]

Can i use only one transmitter while the other transmitter is off?

[@GaryDmedia]

Yes definitely Anyway Highway. You can use a single transmitter to record its own audio without anything else, use a single transmitter with the receiver and still have it feed both left and right channels in blended mono mode. Or use both transmitters with receiver.

[@AnywayHighway1207]

That's great! A big help! Thanks for answering bro.. 😊

[@sylviatremblayfitsystem]

Thanks a lot for this excellent video. My question is how can I uptimise the sound to stereo, using only one transmiter. Shouls I use the split mode or merge. Any other typs would help.

[@tommigunthompson3403]

Thank you so much for this review Gary. It was a really great detailed, thorough review with lots of knowledge and tips. I do have a question, when i use the merged mode for some reason the left channel is slightly louder than the right channel? Is that normal or is their some way I can fix that, Id really appreciate it if I could get some help? Thanks and keep up the great work!

[@GaryDmedia]

Thanks for your feedback. I wonder if you have the safety track function switched on. When in merged mode you can select safety track which lowers the sensitivity of one of the channels. Hope that helps.

[@tommigunthompson3403]

@@GaryDmedia YES! That was the problem, thank you soo much now they are both equal. Thank you Gary!!

[@GaryDmedia]

Great you got a solution. Hope your video project goes well.

[@DustinNcCorchuk]

thankyou! Question: When I have the receiver plugged into my iPhone, in split mode, I can not get channel 2 audio to show up in my iPhone audio. When they are merged, I get both mics recording to the iPhone just fine. Am I doing something wrong? Is this the way it is designed? Is there a glitch?

[@GaryDmedia]

Dustin, that’s peculiar. I wonder if it is the connection cable you are using. In merged mode they are mixed before it sends it to the phone. I am guessing you are not using the SC-15 USB to Lightning cable for audio. Hope you get a solution.

[@NotAboutTheClicks]

Can you record audio with only the receiver?

[@GaryDmedia]

No sorry about that. The transmitters record to their internal memory. To record from the receiver it has to be connected to a recorder.

[@NotAboutTheClicks]

@@GaryDmedia yeh, stupid question😅 thanks for confirming!

[@MrAmoove]

hello and thank you very much for this very well done and super detailed video. a small question?? how can we export multiple tx files? I have the impression that they should be exported 1 by 1. Thank you in advance for your answer.

[@GaryDmedia]

Tristan, that feature I imagine is coming soon along with a mobile app to adjust settings. At present you can only copy files individually.

[@mikejung272]

I don't get the purpose of the pad function. Is it a kind of automatic gain control, something I would not like tu use for audio? Then the pad function and the gain control (fine or coarse) work together? Usually I record to an iPhone through the audio monitor of an Zoom H5 - it is true clipping on the Rode side must be omitted by all means. It is easy to control clipping on the Zoom H5 but I am not sure what is best practice on the Rode setup. You taught me how to use the Zoom H5.

[@adampaultwyford597]

Garry can you have one receiver in one position eg one side of a worship church and the another taking audio from the mixer using cables like in your videos

[@subasiano]

Gary, there is a way to read again the audio files inside the Rode App one time you delate it?, for example save the original file in the compute and then bring again inside of devoice ?

[@GaryDmedia]

I will check it out Tommaso. I’m not too familiar with the new Rode companion app yet. Thanks for the tip.

[@FadiHelbaoui]

Thanks Gary for a very informative video! Just wanted to ask if I can delete the audio files that are already stored in each transmitter, as I couldn't do so in Rode Central application?

[@GaryDmedia]

Fadi, at this stage you can only use the Rode Central app to globally delete all files. I imagine future updates may give us more control.

[@picsbypixrephotography4696]

@@GaryDmedia where on the app do you delete them? I don't see that option. Thank you for the wonderful video by the way

[@DigitalEyesAU]

@@picsbypixrephotography4696 It's hidden away in a very unintuitive place. Click the cog icon under TX Firmware v... Then on the right, next to where it says 7+ hours remaining, click the tiny red Trash icon

[@alansolis565]

Hi! I need your expert advice. For a voice off video which gain (on dB) would you recommend? There's a wide range and I'm new at this. Need some help. Thanks and greetings from Mexico!

[@GaryDmedia]

Alan I would select the highest setting for standard voice over work. Make sure the channel PAD is turned off. Hope that helps.

[@alansolis565]

@@GaryDmedia I'll try that. Thank you so much, Gary.

[@jordanzell1]

Hi. Very informative video. Can you possibly explain after I've exported an audio file and cleaned it up in post production, how do I integrate it back into my video so it replaces the old audio file?

[@jorgecaballero4516]

Hi, question: What is the function of PAD in the microphone?

[@GaryDmedia]

The PAD Jorge is to reduce the sensitivity of the mic input. Mainly for people who have very loud voices. It does nit reduce it enough to make it a line input.

[@jorgecaballero4516]

@@GaryDmedia gracias, no sabía. He aprendido algo nuevo.

[@allensanders5984]

How do you record with both mics on 1 iPhone

[@GaryDmedia]

You have a couple of options Allen, use the digital cable to the lightning port or use the iPhone headset adapter with the 3.5mm lead that comes with the WG2.

[@alessiapronello]

Hi! I have a problem. I connect to my iPhone but I can’t hear the microphone sound from my video. Do you know what this could be? Thank you!

[@2WongsMIR]

Hey Gary. Great video. I bought the Rode Wireless Go II and the iphone cable hack based on your suggestion. When I was recording using my iphone, I noticed that the gain is high and create some noises. I read that actually the gain setting does not work if you connect via a USB cable, which is what I'm using. I noticed that you are using an iphone in this video. How do you get around that problem? Thank you in advance!

[@GaryDmedia]

I haven’t had a problem with overdriving. The transmitters have a function now that you can reduce the input gain on the microphone where needed. You just need to make sure you have the latest firmware installed for Rode Central. Then select the pad for microphone sensitivity. Hope that helps. Love your channels, congrats on the silver play buttons. 2, amazing.

[@2WongsMIR]

@@GaryDmedia Hi Gary! Thank you so much for getting back to me. I do see that function. However, based on the Rode's website, it seems like the gain setting does not work if you use the USB C to connect. Also, i noticed that there's a slight difference in the audio quality of the one recorded in the iPhone vs on the Rode TX, which is very odd. The iPhone track has some artifacts. I currently set the gain as -15. Anyway, thank you. You have a great channel and I'm looking forward to seeing you reaching that milestone! Feel free to reach out if you need any help.

[@GaryDmedia]

I will have another look at those references you mentioned to try and understand it a bit more. The recording on the TX will be a bit better cause it have to be fed through so much processing including Mr iPhone. Thanks for your kind offer of assistance, very kind. Stay safe.

[@2WongsMIR]

@@GaryDmedia Sounds good!

[@TechDisruption]

Good video. Rode Central needs a method to batch export all of the audio files rather than exporting each one at a time. Its very tedious.

[@GaryDmedia]

Yes, but if a bother. I’m sure we will get some software updates in time.

[@umang9565]

Thanks for sharing 👍

[@GaryDmedia]

I appreciate your feedback.