Roland Fantom 0/06/07/08 Music Workstation - Demo / Tutorial 6: How to use the Pad Modes

[@MartinSc76]

Thank you very much for putting this work out. This Fantom is really an adorable everything for every purpose and videos like yours make that all available to users like me. Very much appreciated! All the best

[@soundformore]

Thank you

[@hallcero]

Thank you ! A question: How to adjust the volume of the pads?. The factory batteries sound very loud and you cannot hear what you play on the keyboard.

[@soundformore]

Yes, you can, act inside the zone edit and change the output settings of the sampler…

[@hijon6643]

thank you! question: can you record in real time the performance of the pads into the sequencer? thx again

[@soundformore]

Yes

[@hijon6643]

@@soundformore that´s cool! subscribed... ...is there an specific track/s ( as for exampler track 10 for drum patterns) for this to be achieved?...can´t find this info on manuals etc...thank u!

[@pshimmons]

Good info but I sure wish we could have actually seen the pads as well as the screen. Thanks

[@soundformore]

Yes you are right… sorry… will create another video…

[@pshimmons]

@@soundformore no need for that on this one but…l the next video…. It would be very helpful!

[@fakequartz]

Great video , zoom out more could be even better.

[@soundformore]

Ok

[@danielmilone1195]

Hello, the PADS can have independent audio outputs? Example: Pad 1 through L+R MAIN output, Pad 2 through L+R SUB output. Thank you.

[@soundformore]

Not for each individual pad but for all pads yes; you can apply different Fx per pad though

[@Lyudtaru]

How to lover the volume.?

[@soundformore]

What do you mean?

[@thortschman]

Do you know how to set up Pad Zone to control KBD SW GROUP?

[@soundformore]

Yes will create another tutorial…

[@bobwrichards8561]

Totally confusing. Just wanted to change the color of the bottom row of pads in Scene D005. Explanations seem to bounce all over.

[@soundformore]

Oh I am sorry if it is confusing… how can I further help? Do you just want to change the scene icon color?

[@bobwrichards8561]

@@soundformore No sir I know how to do that. I want to change the pad color to match the scene it’s used on.

[@Feroz7044]

Sir first you should to zoom out the screen, we can't see any keypad & bottoms,,

[@soundformore]

Yes you are right…

[@jorgececilio6005]

Bom dia Obrigado pelo seu vídeo ,gostava de lhe colocar uma questão, estou interessado em comprar um Fantom 08 ou um Fantom FA 08, quais as diferenças entre eles? Obrigado Cumprimentos

[@soundformore]

I would go for the Fantom 08, newer, stronger as a synth and functionalities… there are some sounds you still cannot get on the Fantom 08 but not for long… for me the biggest difference is that the Fantom 08 doesn’t have a linear sequencer like the FA series… the new Fantom has a sequencer based on patterns… check the other videos starting from this one kzbin.info/www/bejne/sIDYkICliJdrkK8… check also the rest of the series at the following playlist kzbin.info/aero/PLirh7S2cI3fjFxxu9RI1L4DrjI1Gd1cts, please subscribe so that you get notifications on new videos as I will explain how the entire new Fantom works free and will point out the differences to their synths… Leo

[@keneokpareke1753]

Hello Can you trigger a keyboard switch group with midi? I have 2 fantoms, and I want to be able to change keyboard switch groups on both keyboards with the pad on one keyboard.

[@soundformore]

Not that I am aware in the current OS…

[@soundformore]

There may be a possibility but it is a bit complicated involving multiple settings of pad mode by scene and by track with midi active in and out…

[@keneokpareke1753]

@@soundformore I know I can trigger scene changes with pads + kbd switch group on one Fantom if I assign a zone on the master Fantom to send a control change from the master to the slave Fantom and turn that zone on and off with kbd switch group pads. Is that what you have in mind? But I'd rather stay within a single zone.

[@soundformore]

Yes, not the best solution at the moment… there may be another solution, just testing it…

[@keneokpareke1753]

@@soundformore I'd be forever in your debt if you find a practical way. As it stands now, I'm having to quickly strike pads on both keyboards within half a second between sections of songs. A LOT could go wrong if I miss 😕

[@edrbob82]

Great content, but very hard to hear you even with sound and speakers maxed out.

[@soundformore]

Sorry about that, it sounds ok over here, does this happen on other videos for Fantom as well? I just invested on a new mixer and audio interface… I will check again the levels…

[@heliosantos2159]

Aqui o áudio está normal

[@DaMaster1983]

i cant hear the rhythm pattern at all.. why

[@soundformore]

Did you check the zone volume associated to the rhythm pattern? By default is 10 unless it has been changed…

[@DaMaster1983]

@@soundformore thanks.. what i did is factory reset.. i might did something with the midi.. im new to this synth. now its working

[@soundformore]

Maybe it went back to midi channel 10 or zone 10 as default via the factory reset, but you shouldn’t need to do a factory reset just for that :)… anyway you have volume now :)

[@DaMaster1983]

@@soundformore yea i do thanks :)

[@DaMaster1983]

@@soundformore you wont believe what the problem is! and no on bothers to mention it.. when you turn on scene remain.. the rhythm pattern wont work! wtf.. why.. This is annoying Try it yourself