Roland Juno G LCD Screen Repair

[@focka73]

Thanks a lot! I did it 🥳🥳🥳 just cleaned up all plugs and connectors. The LCD is fine again 👌🏻

[@elmaestrodemusica8615]

Are you serious? I will tried

[@willo7979]

@@elmaestrodemusica8615 I don’t think it works.

[@matteobruni1763]

Sei stato risolutivo , grazie mille , il mio juno ora è nuovo ! GRANDE !!

[@MikeJunoG]

Replacement Juno-G display modules are now available again, but I can not post a link. Try looking in the JunoG section of Roland Clans forum. The thread title is:"Is this a possible solution for LCD Juno G screen?".

[@randytrader3026]

How about that... thank you sir for probably the most helpful video out there

[@ColinJamesPoulter]

So pleased I helped you out 😎

[@anilkeybordofficial4394]

There is very little sound in my Roland Juno G. No matter how good the sound or speakers are, still the sound is very low. What could be the reason for this? Please tell. 

[@ColinJamesPoulter]

Hi it could be the main potentiometer that is failing or simply a dirty connection from the pre-amp

[@deejuicemailbox]

Can you write me what is the problem exactly with this LCD? Thanks!

[@ColinJamesPoulter]

@@deejuicemailbox If you watch the video you will see that the screen display is partly missing and eligible with fading and missing detail.

[@deejuicemailbox]

That’s OK all the time, but the following video is tell me another things. For example, deatached contact chips on the LCD panel. kzbin.info/www/bejne/rqqbnoyEjq2Hotk These are not clarified errors everywhere.

[@ColinJamesPoulter]

@@deejuicemailbox it's always a good plan to clean all possible cable interconnects because you'll always find "dry joints" for which on most occasions will cure the problem.

[@deejuicemailbox]

Thanks nicely and really useful, logical what you say and present in the video! There are many rumors on the net about seemingly real solutions and now I could buy a Juno G for $ 175, which is supposed to have a still working LCD, but who knows how long.

[@Braulios_Penesecou]

that cheesee intro just made hit like

[@caseycallahan2319]

What did the LCD look like before cleaned the switches? Mine is a frozen screen

[@ColinJamesPoulter]

It was blank

[@bobt7484]

So you did nothing to the actual ribbon cable that comes from the display, or you just didn't show that?

[@ColinJamesPoulter]

I didn't get to show that bit but yes unplugged and cleaned all connections where possible 👍🏻

[@SingerPankajPanditOfficial]

Make a video of the entire process of repairing the display and insert it

[@ColinJamesPoulter]

I most probably will in the future

[@jadmichaelmurray]

@@ColinJamesPoulter please and thank you. sorry about old mate's manners.

[@DNGMaestro]

@@ColinJamesPoulter You gotta do it my friend! A lot of Juno-G's still out there!

[@sky173]

Awesome keyboard. I have one myself. Is there a way to tell the difference between V1 and V2? thanks for sharing.

[@ColinJamesPoulter]

Not sure to be honest

[@sranug]

If I remember corectly V1 has white ribbon, but V2 bronze/brown

[@sky173]

@@sranug Thank you. I'll check that ASAP. I appreciate the assistance.

[@SingerPankajPanditOfficial]

By repairing can you turn on the entire display

[@lalchhandamaralte2816]

Hi! I searched everywhere but couldnt find the replacement lcd. Can you please tell me where it would be available?

[@ColinJamesPoulter]

Hi unfortunately it is now getting more difficult to find them but try E-bay

[@kimdiez2681]

did you try what he just showed you in the video?

[@Legend-nl4vy]

Does your juno g still work after spraying that contact clearer on it?

[@ColinJamesPoulter]

Yes perfectly thanks

[@Legend-nl4vy]

Thanks for replying. I might get one depending on if the seller accepts my my offer... I hope to fix it but it’s a 50/50 chance. This Juno will go down as legendary in 20 years if there’s a long term fix.

[@kimdiez2681]

You must of not watched the short video ;-)

[@willo7979]

@@Legend-nl4vy It’s now fixable here in WA Australia.

[@WINSTANLEYOBXa]

Thank you

[@osun-ase]

I cant find servisol super 10 here, can I use wd-40 specialist electrical contact cleaner spray, or is there another brand that you recommend?

[@ColinJamesPoulter]

Sorry for the delay in getting back to you but yes you can no problem as long as its contact cleaner.

[@osun-ase]

@@ColinJamesPoulter I just tried this and now the screen doesnt turn on at all :(... going to look at it again tomorrow

[@Legend-nl4vy]

@@osun-ase Did you get it to work again? Did you use the contact cleaner version of wd-40? Trying to get some answers myself and I think there is regular wd-40 and contact clearer wd-40. Which did you use?

[@osun-ase]

@@Legend-nl4vy i used contact cleaner. Screen still doesn’t work

[@Legend-nl4vy]

@@osun-ase Never mind idk how forgot what you used its stated in your original comment but did you get it to work within that last month ?

[@mikg2618]

What exactly was the problem you fixed? Don’t find lcd issue in the beginning.

[@ColinJamesPoulter]

Goto 3:00 on the timline and you will see the blank screen which was displaying no information and I did say that the Juno wasn't displaying anything.....that was the proplem I fixed.

[@mikg2618]

Colin James Poulter Thanks, mine is half part by half part spited but working.

[@Pm__Digital_Studio]

Nice

[@rajmusicbaran7921]

I want to take juno g kayoboard, what is the juice in your country

[@ColinJamesPoulter]

Hi its 240vac 50hz

[@manoharsinghbhatitinwari9918]

How to repair fault display without changing.....Plz tell bro

[@kimdiez2681]

He just did, he took all of the ribbon connecters loose and sprayed them with contact cleaner .

[@benluff6079]

If anyone knows how to repair a faulty Juno G keyboard, let me know! The workstation will output demo and audition sounds, but the keyboard doesn't work. I'm assuming there's a faulty connection somewhere

[@benluff6079]

But the LCD works now, thanks to your video!

[@ColinJamesPoulter]

Great that's good thank you.

[@willo7979]

You might have forgotten putting a connector back after cleaning all the contacts?

[@Dombevi]

Can’t reach to find the new LCD. So I can’t fix my Juno-G.

[@ColinJamesPoulter]

That's a shame

[@Dombevi]

@@ColinJamesPoulter but I bought the Facom spray for electronics connectors : 4€! I will try to fix it because it’s the Ver 2.0 and this synth is very powerful for sequencing all my gears. And the 4 audio recording tracks are very good. I bought a Roland FA-6 in January to replace the Juno-G but it is not exactly the same thing. The Juno-G have his own assets and it is very easy to use it, the workflow is very simple. For 4€, I am not taking too many risk. I hope your video will help me to resurrect my old synthesizer. 😊😊😊

[@carlosdiaz3674]

Hello, I'm from venezuela, i would like to now where can i to buy the. Display LCD Roland Juno-G, can you suport me please?

[@ColinJamesPoulter]

Hi I'm so sorry for late reply I am myself finding it difficult to find the screens I think they don't make them anymore.

[@deejuicemailbox]

11:15 😺

[@itsdaeyonglim]

Dayum

[@rblfrmthewstdwn]

Got one for $275!

[@Bongumusa_]

Where?