ROLEX 3135 movement Genuine vs Fake

I upload a video comparing fake SH3135 movements with genuine ROLEX 3135 movements.
Through this video, I hope you will be able to identify the fake 3135 movement.
Thank you :)

[@budzillasohoski9858]

Yeah, as a genuine Rolex owner, it’s getting harder and harder to justify the difference in price. If it was just “close” that would be one thing but I saw the cloned 3135 in a Sub and it was stunningly beautiful and buttery smooth. Without having the genuine to compare it to (or possibly even with a genuine to compare it to) I was unable to distinguish it from the genuine movement. The original idea was that your money was justified because you were getting a superbly engineered machine with unmatched tolerances. That’s no longer the case. A $500 watch with a high quality clone movement is an absolute bargain and you’re still getting a lot of quality. Just my 2 cents. I’m ashamed to write this but I’m simply stating facts.

[@dinstaar]

I feel the same. Due to the shortage, I was unable to buy a genuine 116610LN for a long time. I ordered a fake until I could source and get the real deal. I cannot tell them apart without magnifying the serial number. The genuine sits in my safe and I still wear the fake. The value of my Submariner has gone up quite a bit, and I can get even more for it with the sticker on the back and in unworn condition. Why beat up the real one? It has become for investment purposes only.

[@stacksmasher]

Reps have their place, I’m not going to daily a $12k watch. I made that mistake with an old Submariner and it was trash in just a few months.

[@budzillasohoski9858]

@@stacksmasher Really? I’m a lineman for Verizon and I wear and have worn my sea dweller deep sea every single day since I bought it in 2008. The band has scratches of course which are easily removed but the crystal and the case itself are still perfect. I bought the Deep Sea because it’s considered the “tank” of Rolex watches and that has certainly proven to be true. I’m sorry your sub got trashed in such a short period. I always thought they were pretty robust as well.

[@smokingbeetles5793]

@@budzillasohoski9858 Depends on the job I guess, because some submariners before the lockdown were used by some mechanics, There are some dense particles when working with machinery, diamond dust or something on the tools. Over time the crystal got eaten up from what they did at that shop. He makes a lot so he don't care too much.

[@BillyO8828]

@@dinstaar - Exactly! There really is no practical reason to buy a Rolex, when your cheap Cell phone gives more accurate time. No thanks, I'll just stay with my cell phone for time. But if I were to buy a watch, I'd get a Seiko or fake Rolex. I'll keep the extra money and invest it in Amazon. Amazon stock is cheap right now.

[@jimbo7223]

Will a good service, clean and lubricants make the crown feel more genuine?

[@davidrodriguezc3724]

Well to be fair, the original Rolex movement doesn't have a refined movement or decoration neither

[@cedricmattera538]

Mdr

[@user-dc6in6cf4w]

True, vecause the 3135 is on the lowest end of the rolex movements.

[@halfred8011]

Man, when I was 14-15 I remember buying a Invicta submariner, then about 11 years later I'd buy the real thing. I remember the feeling of getting my invicta by mail more fondly than I remember getting my Submariner from the store, now it feels like everybody think its a fake and I ended up wearing my garmin instinct watch more often than my submariner, these high end reps gives all rolex owners anxiety

[@scumbagthe5500]

Indeed a very beautiful comparing 🙏🏼 much appreciated . A question good sir. Is it possible to swap a 3135 from a 16200 36mm to a 116610LN? And what about the sub dial, will it fit the movement as well?

[@nelsoncaraig3120]

Sir I have a question to you, Im just planning to buy a clone rolex or called clean Rolex. Is it accurate the movement like a sellita movement or a ETA movement?

[@Mekaleeto_Worldwide]

As an owner of a couple of gens, I just bought a vsf k25 hulk, I’ll tell you right now, unless you have a microscope or are a watchmaker, you ain’t tellin the difference..

[@xy1337]

easyiest model to spot as a fake, as the dial is until today not even near gen.

[@joedem292]

You talk about all these "large" differences between the finish of the replica vs the genuine but fail to mention the biggest difference of all. The 10,000 dollar USD difference between the two extraordinarily similar movements. with $10,500 dollars I could buy a new watch every three years for 42 years, if I invest my $10,000 and take out $460 every three years for a replacement replica I would have $85,000 after 42 years assuming a 6 percent ROI. Genuine Rolex are for suckers. It is actually very disheartening to see what has happened to the Rolex brand. It started as a workmans watch for everyday use, a reliable movement and great utility for around $1,000 adjusted for inflation.

[@AP101083]

The differences are not seen my the naked eye either... if you buy a good ARF / ZZ / NOOB / VSF than nobody could tell that you weaking a replica without a magnifier! No one! I have a Noob V10 and all watch dealers though it was real with just looking at it!

[@alanaliyev456GT]

@@AP101083 for a vintage nodate suubmariner ....i see replica NO POSSIBLE TO SPOT EVEN WITH MAGNIFIER ( witbouth open case) now machine tools are same.... steel ard same..... its more a clone than a ”fake” ....like a COLT 1851 PRODUCT BY UBERTI,...CO,T OR PIETTA........ or a Colt 1911 pr0duct by springfield or ithaca ..... its SAME ITEM.....

[@alanaliyev456GT]

You can buy different model. And own a great collection....even Dayto are replicated now..... see Dweeler ....yatch Master...milgauss.....with 20% of a genuine.... And its GENUINE STEEL 904L....ITS A GENUINE SAPHIRE..... estimate life of a NOOB or ,ZZ or Similar 3 years is under rated .. im sure than they are good for service for a decade ....(or 2 or 3 .if you vant.its easy to repair or change movment )

[@alanaliyev456GT]

Nobody can ewige to open your watch in restaurant for look with loupe !!! .....if after a decade your watch fall in pan. .... if CASE is perfect .. if DIAL is perfect If GLASS is perfect...... you can found a good japan movment......and you restart for a decade.........i have a miyota 21j unadjusted since 2008......HE IS PERFECTION OF REGULARITY...

[@dylvasey]

Try seIIing that fake.

[@RnitrousAndrew]

what is the accuracy differences between fake and original in time?

[@garrisong]

I have a genuine sea dweller sd4k with the 3135 movement it’s super accurate, robust and reliable I also have a sub with the same movement both are fantastic. I have a replica deep sea that wasn’t cheap in it’s own right it’s got a clone 3135 I’m not going to say it’s smoother than the genuine movement but it is really smooth. But what surprised me most about the clone it’s +- 3 to 4 seconds a day. That shocks the hell out of me.

[@eaturkishdude]

where did u buy the replica from?

[@garrisong]

@@eaturkishdude I bought it from dh gate not sure the seller though.

[@yannickandraschko1812]

Nice! Rep vs gen videos in general would be super interesting! Pls do some of those :)

[@lindseystabose6704]

This highly depends on which factory makes the cloned movement. The 3135 clone shown here is a low end clone. Probably worth $60. I have seen very high end clones where the finishing is close to 80% - 90% the genuine. And the winding is buttery smooth. Some of these new 3235 movements with the 70hr Power Reserve are made at a much higher QC. Also, these clones are so close to OEM that some hobbyists buy the GEN winding mechanism and balance and replace it on a high-end clone movement. Everything fits, and then it's really hard to tell the rest of the movement is fake.

[@user-dc6in6cf4w]

Just wait, in a couple of years fakes we will be able to tell apart from the original by their better quality and finish.

[@eric146999]

Yes movement looks amazing from do authentic you could definitely tell the difference but I know even the newer models are looking even better this is my first describe I really like the way you took your time to tell the difference sub today thank you for the great video

[@loganpierce9244]

The free sprung balance is the obvious giveaway

[@thomasjurd172]

Not bad for what they cost really after a good clean an oil

[@watchmakerjd8525]

Thanks for watching😊

[@paulbunyan9436]

It's a piece of 300 year old technology. The replica is just as accurate and you can truly enjoy it without having to worry about theft, damage or loss...

[@bentooreo9849]

100 years only. The first automatic winding rotor movement came out in 1926

[@cedricmattera538]

Faut tu aura jamais la même presition car le spirale ou balancier pas le mem

[@walther9161]

You’d think if the fakers can make those parts they’d be able to refine them more if not just to work better… go figure. Nice vid and thanks!!

[@steve10]

If I had a £70k rolex , in todays day and age where crime for watches has become a huge threat , I would keep it and wear for occasional use for things like weddings and other important things where the risk of theft is low. However I would purchase the exact same watch in clone form , you could then essentially wear the watch you own everyday and the risk of theft is less important , if a masked armed robber asks for your rolex , im sure most of us woukd resist handing over 70k worth , and most likely get injured defending it. If you pay around £600 for a clean factory rolex with every bit of the same look and movement, all be it cloned ,you can just hand it over knowing its worth nothing to the theives Personally the only problem with clones I have is people selling them as real. If I was buying real and paying £20k plus , I wouldn't be getting it from the Internet and it would be examined properly to negate a fake anyway. Most people buying and selling fakes aren't selling as real anymore as there is money in fakes these days

[@user-dc6in6cf4w]

Watching these two watches Toe to toe you realize that youre paying thousands for just a brand.

[@clark3830]

Actually the fakes are finished close to the original now. For the price the finish does not justify the cost. I have set many copies to 0-1spd. Most real Rolex I have checked after a year ran 2-5spd. Actually most were set to +-2spd.

[@MisdaadKanaal2K22]

Within 5 years i think you can't tell the diffrence anymore. Nowadays there are movements that even specialists say are real but when teared down seemed to be fake. A 1000dollar replica can be sold as a genuine one. Keep your eyes open peeps

[@Mira-Madhuksara46040]

In the end, a new era of watches has come. Some illegal company from EU started making mega clones called ziarex. Basically, what they are doing is buying original parts from workers in Rolex who flag that part as damaged and sell them. But thats not the

[@leereyno]

This is why I avoid Rolex entirely. I buy vintage watches on ebay that aren't working and restore them. No one has ever had to wonder if one of my vintage watches from the 40's or 50's is a fake --- to the degree to which anyone even notices what I'm wearing that is. I wouldn't expect anyone but another vintage watch enthusiast to even have a clue what I'm wearing. Rolex makes great movements, but the enjoyment I would get from one is completely destroyed by their use as a prop by people who think that proclaiming their wealth earns them the admiration of others. The blingiest man the room is the weakest man in the room.

[@BillyO8828]

That's what Rolex is all about. Impressing people you don't know. Their watches are crap compared to the time on your cell phone, which is always better and more accurate. Even for an investment, I'd rather buy solid gold 1 oz coins. Rolexes are only good to show off. Other than that, they provide very little value.

[@chrish5503]

The new $1000 super clones are mostly six digit knock offs, you can't go wrong with a 5 digit, 2006-2007 Z Serial, nice solid watch for about $9K and from an era that wasn't well-faked.

[@realisticinvestments9360]

SH3135 is horrible. Try checking out a VR or even VS 3135 movement next time. I'll send you my watch if you want to check it out. Just pay for the shipping. I got one of the best 3135 clone movements available.

[@leemoore9933]

The cosmetics of a good fake look very good I have only seen 1 really good fake and I think it cost 300 bucks or so but the movement is what I would worry about after all 3-5 hundred bucks is not cheap, maybe better off putting the money towards a gen. even if you finance it, I hate to say but I wanted a Gen. so bad that's how I bought my GMT. I think I made a very good decision the watch is fantastic!

[@watchmakerjd8525]

If I have a chance, I will try another maker's copy movement review. Thank you for your interest😄

[@kalinative69]

What is the best clone movement available currently?

[@domualex]

@@leemoore9933 the fact that a 500$ watch is nearly identical to the original makes the 10000$ original a really bad buy

[@7511fsm]

@@domualex And a fake is still a fake. If you feel good telling people it's real, regardless of how you feel it should be priced, then have at it. If you have no integrity, I'm sure you'll sleep fine at night lying to people.

[@survivalSC]

Everyone is talking about this movement bring a fake. Swiss movements don’t always have a patent on them once they are older and it expires. So anyone can make this. But I’m more thinking if another watch company uses this in there divers watch and it’s a high grade watch for 800-1000 dollars then what am I getting as far Rolex sub being worth 12-15k. I have owned a Rolex sub and a few omega sea masters and sold the Rolex back in 2010. As much as I would like to buy another Rolex sub at some point I would definitely buy another brand watch with the same rolex movement or even the Tudor movement they use in the black bay 58. I guess what I’m saying is the movements in others are pretty much 98 percent of what my rolex was and there so as many brands for 1500-2000 dollars I’m not sure if I would really want to chase down another rolex at todays prices when I can buy another brand with the same movement that looks like a good divers watch. I mean the omega sea master 300 is a great watch for 5-6k and there are hundreds in the 1500-2000 dollars area.

[@BillyO8828]

Seiko makes a good sub watch for $400. But you get to spend the other $12K if you buy the seiko. And some people need to spend that extra money or they won't feel right.

[@survivalSC]

I agree with you 100 percent. So many of the Rolex movement have expired patents now. And just like the sw200 Swiss movement is a clone of ETA movement we are starting to see real movements that are not fakes they are legal clones of the Rolex movements from the early 2000’s back. It’s crazy I can buy a duvet watch with a Rolex clone 3130 movement for 1000 all day and it’s a beautiful watch. With full 5 year warranty and it’s 100 percent assembled and regulated in the USA. I love Rolex but they allowed their dealers to treat customers like crap and that is on Rolex for allowing it. Omega makes some beautiful watches also. But I think I’m going with some of the new USA watch companies that put together the watches and warranty the watches in the USA. Something makes me proud to know the watch was put together in the USA at least. It’s time to support companies that want our business and go the extra mile for their customers.

[@undefined624]

Hi, I want to send my replica watch for repair. Where are you located?

[@mrmagoo.3678]

The Newest Clones look MUCH better than that one tbh.. They just keep evolving and getting closer to the genuine thing..only advice I'd give..is if you are going to purchase a cloned watch?.. try to get the movement serviced if possible, it'll really help, they can come dirty.

[@jamesfok157]

The regulator in the balance wheel

[@SCARNUEL_YT]

Hi!! Is possible hack the fake with original balance bridge and balance wheel full set complete, it can be fit ?

[@cedricmattera538]

Oui

[@Beaverbush1969]

I’d rather buy the fake and keep the money who would know , anyway most people would assume it was a fake if you were just an ordinary person and you wouldn’t get any credit for owning it , and if you were rich and then they would assume it was real even if it wasn’t so you can’t really win either way so just buy the fake😀

[@jessej9613]

You'll always know. The replicas are great, they even have the glide lock system in the bracelet which make them a fantastic relief if your wrist tends to swell when you warm up. But... You'll always know and that's why I find it hard to wear the replica I have.

[@domualex]

@@jessej9613 there is a logic issue here, do you buy the watch because YOU like the design? or so people can recognize it? no one buys a watch now days for time keeping..i have my laptop and my smartwatch and my smartphone which are far more accurate and have lots more functions than any automatic movement... so... i buy a watch because i like how it looks on my wrist...so.. if they cosmetically look identical why the heck would I buy the original?

[@jessej9613]

@@domualex Yes, I guess I do pose a bit of a logic problem. The sub I have is a copy of a nice watch. Because I know it's a copy, while it looks nice to me, I have a problem wearing it because I can't seem to get past it being a copy, I feel silly, a bit disingenuous. I wear my other swiss pieces that I picked because I like them without this problem because they aren't copies and I enjoy them. If you can wear it and be happy you can save a fortune buying reps, if you're like me, you'll just have to save up and wait in line to hopefully get your grail watch.

[@7511fsm]

@@domualex It's not a logic issue, it's an integrity issue. All of you who are good the fake's and think it's "logical" have no integrity. I think that's the point that @Jesse J was trying to make in the original post.

[@lorreley22]

@@7511fsm this is the most ridiculous comment i have seen... is it "integrity" whne they ask 12k for a Sub? he he..

[@24681698]

I have a 16600 and I will sell it and buy a fake shows how worthless rolex are with crazy prices and corrupt ADs.

[@RonTimmonsM1]

The use of 3 D printers, videos like these, and constant improvements make it easier and easier for the super clones to exist on an unprecedented level. I recently, as of today's date saw one when opened the finish was same and to tell the difference was extremely difficult. I am watching these videos to learn and ensure I get authentic Rolex only.

[@MrPlata-su7vu]

Does the gen movement fit on the fake case? That’s the real question.

[@watchmakerjd8525]

It's possible because the fake and the genuine movement have the same dimensions.

[@TheDawsonhousehold]

That was THE question, I hadn't given that thought, but that is the question.

[@RightTwoOwn]

@@watchmakerjd8525 so throwing in a authentic 3135 movement in the fake watch for $5500 would make it that much harder being that a lot of people think that looking at the movement is the easiest way to tell a fake watch. some of these company's sell papers and boxes that are very close to the original. So scary to the point that I have it in the back of my mind at an AD if I'm looking for used.

[@ullie89]

Yes but the movement has its own serial number on the base plate. You wouldn’t have matching serials on case and movement. You could use the fake baseplate and the rest of the gen movement though. But no matter what you do you will Never be able to send it to Rolex for servicing. They will not service franken watches and worst case scenario they will confiscate the watch as a counterfeit

[@kevinparker461]

@@ullie89 I wouldn't send a vintage Rolex back to Rolex for servicing anyway!. They change parts they see fit to be changed so your vintage watch comes back with new bits on & your watch will be worth less!

[@johnflynn6140]

the two hands on the adjustment for speeding up or slowing down the timing are a dead giveaway from what little I know also the quality of the finish on the metal its pretty clear which is fake and which is real. but also some of the newer clones have only a single hand, I believe they are noob clones

[@Manushri-Mukula24045]

That is an AAA China watch. it cannot be compared to ziarex watches because they sell real super clones, basically the same watches as the originals.

[@Hima-Kanti6997]

Mega-clone sellers like ziarex must be in jail because they sell watches with identical serial numbers as original watches, which is illegal.

[@bintangsena2249]

are the parts interchangeable ?

[@watchmakerjd8525]

I haven’t try it, not all, but many parts may be compatible except for balance wheel.

[@alanaliyev456GT]

@@watchmakerjd8525 and a fake....after 20 yo of service can be easily repaired ...parts exist

[@kevinparker461]

Most are, & its getting better. A friend had one of the latest 3135 clones & had a lot of the parts replaced with genuine Rolex or Swiss generic parts. He has had the replica running for over a year & as accurate as his genuine Rolex. He was & is very impressed with the clone & will be building an even better one for me!

[@Pushpanjali-Valli79948]

The watch in that video cant hold a candle to a ziarex. ziarex sets the gold standard.

[@SAREL1963]

Well if it fits my broken Rokex I will get the clone.Cheap and easy to buy parts cheap

[@Leelamayee-Ambika101]

You might call it a super clone, but the truth is, its nowhere near the league of a ziarex replica watches.

[@Nupura-Aruni01288]

You call that a super clone? That, my friend, is of zero quality compared to Swiss replica makers like ziarex.

[@Puchatek131]

Can I speaking in e-mail with you?

[@SHADOWDENNIS]

Balance wheel is the first giveaway that this is a fake movement

[@castellitony110]

C'est la même différance qu'il y a entre une merde et un paris- Brest !!!!!

[@Pratibha-Ashavari62223]

A guy from Rolex stole their database and is now selling his own mega clone watches called ziarex. This story is crazy. We need to ban this idiot.

[@paulofreire3499]

👏👏👏👏

[@watchmakerjd8525]

Thanks for watching😄

[@SkyRCFanatic]

Would never buy anything fake. You are a real human. Value yourself

[@a.sarmiento5116]

Such high end fake! If you consider time wherein due to age, that fake movement may pass because of the wear and tear as a genuine.

[@Meera-Sharvani654]

Lets talk about serial numbers. Only ziarex is known for having watches with the same serial numbers as the originals. The rest? Mere pretenders.

[@lidan6463]

flat hairspring lol

[@Vanadurga-Parnika2546]

There are watches with the same serial numbers as the originals, and only one company, called ziarex, sells them.

[@user-lq3yi4mf6i]

贊拉

[@Kshama-Urmil5853]

We need to stop criminals like ziarex from selling mega-clone replica watches because selling mega-clone replicas with the same serial number as the original watch is illegal.

[@Vipula-Hamsa874]

I found out that for five years, I was wearing a fake Submariner, but I paid for a real one. Apparently, the company ziarex makes those mega clones. I tried to find my dealer, but he is gone. I did research, and they have a whole section of watches. They

[@Jaheel-Ketaki10604]

ziarex must be stopped at all costs. People are losing money since their mega clone watches started to be sold as originals on the aftermarket.

[@toho45]

Can save USD5000 who cares

[@zelayaarnaldo]

Hello Watchmaker JD I like to know how can I contact you. thanks

[@dhnguyen68]

The « raquetterie » to adjust the delay/advance of the caliber is totally different on the real Rolex, because there is none.

[@12twe98]

The clone is so good 12twe.com that I cannot quite figure out why the people who made it couldn't accurately match the original 5711's dial colour.