Go to www.RoofingInte... to watch the complete 14 video series on installing metal roofing.
Пікірлер: 36
@Bluesparker4 жыл бұрын
Wouldn't the horizontal stringers trap condensation and rot the untreated furring strips ? At the least some thin verticals should be run then the horizontals. Now condensation can find it's way to the gutter.
@Bartsnightmare9 жыл бұрын
Put the entire video on KZbin and make $$$ millions on all the hits you will get.
@JOHNOBUB8 жыл бұрын
great. save money, I like it.
@davidtrang6655 Жыл бұрын
can you install metal roof on the flat roof ? can you let me know please
@totalmayhemleather40304 жыл бұрын
Does anyone on here know what type of wood stripping i should use between my shingle and metal roof? Will yellow pine work good? I know pressure treated will rot metal roofs.
@jewlyn2464 жыл бұрын
1x4 yellow pine!
@jhue63377 жыл бұрын
Good informative video... it should have been a little bit longer.
@glen399310 жыл бұрын
I didn't see anything that helped me in this video
@donfrank4429 Жыл бұрын
great I did buy your DVD, DIY guy!!!
@kidharris5 жыл бұрын
Will wonders never cease, a roofer without a tan??
@learemington17003 жыл бұрын
He’s the ceo. Never goes outside.
@MrGmoneyCat5 жыл бұрын
There's nothing about flashings or drip edge or valleys or ect ect? Where are all the wonder videoS
@eliandromanАй бұрын
So screws never goes on the ribs right?
@natalymn2847 жыл бұрын
Thank you so much for your videos! Excellent explanations even in small details!
@sbennettyt9 жыл бұрын
I liked the series for the most part I just wish you had shown the chimney pieces being put on instead of just describing it. The whole point of buying a video is to SEE it done. The other chapters were good.
@friendlywoodworks441 Жыл бұрын
We are renovating a commercial building we bought for our business...we are looking at Premium Pro-Tuf PVC to cover the interior walls but the cross section is the same...I am excited.
@rogerdirkx.1679 Жыл бұрын
I just saw your video on installing metal siding. Very helpful. I have a metal building that I would like to add a lean to the side. My metal is installed vertically. Before I install the ledger board what would suggest I fill the space for the difference in the rib height? Thanks for your help.
@jeffsond4 жыл бұрын
Thank you. I’m building a 10’ x 12’ Gazebo (the roof will be of course a little bigger) I’m going with a hip style roof. Where do I start the first panel?
@jamespotwin34882 ай бұрын
Question is can you use butal tape or caulking silicone down the seams of each panel to prevent water from seeping underneath
@RoofingIntelligenceАй бұрын
You can but it really isn't necessary except on low pitches, 2/12 and below.
@MrGmoneyCat5 жыл бұрын
So where's all the videos that you describe of those video series. ?
@danielherschberger6424 Жыл бұрын
Definitely an old school way of doing a metal roof
@canoehat6 жыл бұрын
I sent this guy a question on his web sight a month ago and still haven't received a reply. I would like to purchase full videos but am hesitant to because of this.
@helenenonodo16932 жыл бұрын
What do you line the inside of a shed with?
@jeremytisdale98433 жыл бұрын
Should you run boards for metal or can you lay it right over shingles which is the best way
@RoofingIntelligence3 жыл бұрын
Always install boards beneath your metal unless the decking is reall plywood, at least ½" thick. OSB decking and metal roofing screws don't work!
@TimbapaEllegua11 жыл бұрын
Thank you soooo much.
@Peter-od7op3 жыл бұрын
Ty so much to help us our
@heatherharrison15110 жыл бұрын
greet video thanks
@brianmackey23459 жыл бұрын
nice tips on your video, feel confident with myself about being able to get it done right.
@parmanandpremnauth67833 жыл бұрын
How to do valley
@RoofingIntelligence3 жыл бұрын
Please go to RoofingIntelligence.com to access my entire series on installing metal roofing.
@bigtimebeerlover5 жыл бұрын
You had me! Great videos and I was hooked into your instruction. Then I saw the sales pitch for the videos. Probably worth the money for newbies but you lost me. have a great day!