The easiest way to fix a bin sensor that keeps going off early or won't stop blinking even after you've emptied the bin
Пікірлер: 46
@Cyresea2 жыл бұрын
Thank you so much for this video. I was really frustrated with my Roomba constantly saying it was full, no matter how much I cleaned it. But I was stopping at the point you said "most people stop at..." I didn't realize the inside of the bin mattered at all. Cleaned that, and sure enough, the Roomba reported things as A-OK. So thank you!
@alexm45153 жыл бұрын
The best short video on this topic, I've seen! NICE I cleaned and tested the Roomba sequentially until I resolved that the area you're describing was the issue. Your explanation is perfect. Now I understand why the compressed air of the bin seemed to resolve issues though I couldn't see any sensors in there. Duh! Makes sense now. You just saved me a Roomba replacement. Thank you
@bonnievandergriff82723 жыл бұрын
Thank you for this video. Even though the video is almost 3 1/2 years old, I was able to fix the problem. I watched a couple of other videos before I saw yours but this video was the one that made the most sense to me. I was able to easily follow the instructions in the video and my problem is solved.
@tilihunt16182 жыл бұрын
Thanks!!! it worked!! and you video is short and right to the point
@Bogenschuetze5 жыл бұрын
This tipp realy solved the problem and explains whats going on. Tanks for help. :)
@lholley1003 жыл бұрын
Yep solved it! I must have missed one of those sensors. Thank you!
@greatjae0rb4 жыл бұрын
Thank you for this! I was about ready to kick mine to the curb. I had the dustbin thoroughly clean, but didn’t check the sensors on the bottom. That solved it!
@326dad3 жыл бұрын
This did the trick. many thanks
@menasheybaum12615 жыл бұрын
thanks, helpful tip, in my case the bin cover was lost. to fill the gap between the robot and the removable bin i attached foam rubber on the robot side, than i got the full bin indicator because the sensors were blocked. i removed the rubber that covers the sensors optical line and my robot starts to work again like new.
@riteshthebhatia4 жыл бұрын
That's really helpful, you're a legend!
@heathervinglass50233 жыл бұрын
Yep inside little knobby thingys (technical term).. Thanks!
@stellatrout4 ай бұрын
Hero! Thank you.
@shashasaja4 жыл бұрын
I clean up the sensor it’s not solve yet 😞
@Sam-Edwards6364 жыл бұрын
Fixed thankyou!!
@AequitasSaints5 жыл бұрын
My issue is Google is saying the bin is full. But the roomba is saying it's not full.
@sparkling_sinchana60642 жыл бұрын
Followed these instructions still its same issue... not sure what else to be done
@therealchickentender5 жыл бұрын
Whoever thumbed this down is roomba troll.
@CarnivoreConservative7 ай бұрын
What a silly fix lol.... it worked😂
@chrisewen38132 жыл бұрын
Mark, thanks for the succinct help. I've been frustrated in my efforts to fix this device until watching your video. The "that's where most people stop" is where the real useful info came.
@sdlock834 жыл бұрын
This doesn't solve the problem. The Roomba itself might be cleared, but the app still says it's full.
@RandyFromBBlock3 жыл бұрын
Thank you. I had started reporting it every cycle. For some reason that worked.
@royrom862 жыл бұрын
just did this and it worked ! thanks soooo much!
@mRtUnBabY2 жыл бұрын
Thanks and Recommended for all
@KarenVeal12 жыл бұрын
Thank you, that fixed it!
@maiadi28393 жыл бұрын
Thanks, problem sale !
@HannibalBuie Жыл бұрын
Thanks so much!
@chanelwilliams54433 жыл бұрын
Thanks!
@daviddixon54646 күн бұрын
Excellent information about the infrared sensors. I usually rinse the bin door with our kitchen spray nozzle to clean around the notches where the sensors go and dirt collects.
@Pkanercat5 жыл бұрын
Thanks! You saved my sanity... ;0))
@richconboy54563 ай бұрын
This is such an annoying “feature.” I always need to wipe my sensors + bin like 5+ times to make the error go away-how clean do they expect it to be? It’s a vacuum cleaner!
@betteprice61359 ай бұрын
I did everything cleaned everything changed rollers (brushes) over and over. Just want to help and advise. I finally after days of taking it apart and cleaning changing everything I thought weel I will just take the battery out and put it back in kinda like rebooting your computer. IT WORKED YEAH So if nothing else works try that
@DarrylHart Жыл бұрын
Thanks for this mate you're a legend! I never knew that was the sensors, it was doing my bloody head in!
@elizabethwilliamson65722 жыл бұрын
Thank you so much for this!! Fixed my Roomba that I could not get to work.
@djbrad10004 жыл бұрын
Great video... Fixed myhn.. don't forget clean senser and inside bin... So light can get through
@tar90434 жыл бұрын
Straight to the point. I cleaned the sensors multiple times but knowing the specific area and it’s function helped to know where to focus the clean. Thanks!
@t33d332 жыл бұрын
thank you so much! I was cleaning wrong sensor!
@sarahabdulsalamful8 ай бұрын
That worked. Thanks🎉
@jacobwatts265911 ай бұрын
Thank you so much for this!!
@jakegoakes9 ай бұрын
Thank you
@itme24514 жыл бұрын
My bot is fixed! Thank you
@yaakovcohen54904 жыл бұрын
Worked!!! Thanks!!!!
@rewardilicious5 жыл бұрын
Thank you for the last part
@linz15684 жыл бұрын
Thank you! Thank you!
@dernst69834 жыл бұрын
Thanks. Gave the sensors a good clean and I'm back up and running.