This guy has more stories than Walt Disney. I have 31 yrs. as an own/op large car. If you know anything about a truck with a CAT engine, it's not about HP it's about torque, which comes from low RPM's coming out of the hole. Keep mashing that fuel pedal & constantly using that Jake all the time. No need for a Jake when you bobtail, pull an empty or under 45 mph. Cheaper to replace brakes instead of always throwing that decompression on the engine and having to work on it. Guess this is what separates old school from new school.
@Lone_1x18 күн бұрын
He also upshifts gears while leaving the jakes on. Horrible on the engine.
@jeffreyschultz5356Ай бұрын
He's turned into a You Tuber TOOL!
@stanSniderАй бұрын
You’re always going to explain it in a future video and you never do. It’s getting old.
@mikeh524Ай бұрын
@@BostonMainbecoming? He is a fraud already.
@dalehartley-vd9qoАй бұрын
Hi Tim I like to see Brax working in the shop getting that experience that's cool
@philhammond5908Ай бұрын
Turning up trucks that drivers are running is always a crapshoot.
@theglitch99Ай бұрын
It takes a skilled driver/operator that understands the mechanics and cares about the equipment....
@CodyM-uh4kyАй бұрын
10r8501 is the part number for stock cat injectors lol. So no you’re not flowing big fuel like you’re saying you are. Pulse width gonna be stretched way too much for having the 1000hp that you claim. The new part number for “59s” is 211-3027 the reman number is 10r0959. You’re flowing 2.8 kgs, the 59s flow 4.7.
@Jm-is9igАй бұрын
The lies always catch up to you
@moondog3162Ай бұрын
Hey now......don't be blowing his fib🤣🤣🤣🤣
@arrowkart4jАй бұрын
Brax working in the shop with you will be a lifetime of memories and he’s learning a valuable skill. My Dad had me in the shop at his age and I am forever thankful what he taught me about doing mechanical work and driving trucks. Keep up the good work. How’s Holy girl?🙏
@tnolan3176Ай бұрын
What happened to the grass cutting business ?
@24GarlandАй бұрын
Tim,it's great seeing you back. I love your new shop. I'm praying for you and your family daily.
@edwardwilliams9874Ай бұрын
Yes sir out of Frame for ol whiskey it needs it a complete overhaul top to bottom side to side everything new Travis works his butt off with ol whiskey beautiful truck
@RobJohn80Ай бұрын
@@edwardwilliams9874 Cat engine blocks almost always need major machine work to bring them back into spec. The passageways in deck need to be inserted along with all the counterbores.
@richardalmendarez5942Ай бұрын
Having brax working at the shop is awesome great job brax. I can’t wait see him take over and to hell with all them haters
@producerk8247Ай бұрын
You and Steve need to release a video on a certain day at a certain time, weekly. Period. You want new subs, original subs to stay loyal, watch and comment... then commit. Might be harsh and a hard pill to swallow, but that's the way to greatness. This random day release shit is not the way to keep a channel afloat. Keep some B-Roll for those off times like vacation or what have you. Just simply be punctual, weekly.
@MiaM1ViiCEАй бұрын
He can’t even stay committed to the mother of his children 😂
@JG-zy6cgАй бұрын
@MiaM1ViiCE u know something we dont?
@jamesjournell867Ай бұрын
& very, very few Utubers do that @ all.....
@BALLSOFBEEFАй бұрын
@@MiaM1ViiCE i waited my whole life to meet jesus how the hell are ya ? g t f o h
@mikeh524Ай бұрын
@@JG-zy6cgyes. They’re getting divorced and she got an order of protection. It’s on Monroe County TN public records
@I-am-not-D1-4UАй бұрын
Tim you know that you can not have good old Rooster 🐓 out it’s the leader of the pack. Now it’s time for a fresh wash job.
@douglasmedlin7159Ай бұрын
On tarping just look at Maverick or TMC Trailers and see the way they bungie the tarps. Nothing more impressive than a tarp job done right.
@user-qy5pq9hg2rАй бұрын
I feel much safer on the road now that most o Tim's junk is parked.
@JohnLaws-sg8yhАй бұрын
😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
@philipberry2704Ай бұрын
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
@moondog3162Ай бұрын
😂😂👍🏻👍🏻AMEN
@davidcaskey46698 күн бұрын
Tim runs south i run north
@justinbrown2093Ай бұрын
That Tim was a good all over video , keep it old school, and how dare people question what braxton can or can't do . He's learning hands on ,there's a lot of men out there that can't do shit lazy useless humans. And got to say Bryce will be missed. Hes a strong right hand man to have on the Gentry crew
@I-am-not-D1-4UАй бұрын
Damit Tim when it rains it pours but you always bounces back.
@jun1977iАй бұрын
nice place, really cool, you are like a phoenix men, is nice to see this, shop look amazing. 👏👏
@edwardstephens247Ай бұрын
Good evening Tim! I truly love the relationship you and Braxton have. He This is the very best time you can spend with him he will always remember!
@henryg683Ай бұрын
The Braxanator aint no poser he probably knows more than a lot of new mechanics coming into the business and he’s young and probably puts a lot of them to shame!!!! And that’s the facts!!!
@Halfstep2024Ай бұрын
Fun fact, my dad was Joe Bentleys first driver when he left EDS. So I was in the actual truck that worked to build that whole shop and business a good part of my childhood. Dad ran Oregon for him weekly for like a decade.
@temahenoniania6623Ай бұрын
❤the new truck yard tim gentry keep up the good work more room for the boat hoist now
@kenwithrow9032Ай бұрын
Tim what did ya do to my truck now? Poor old rooster! Prayin fir rooster and Bonnie and whiskey as well as my favorite you tuber and his family
@jasoncody1537Ай бұрын
Your business has really grown I'm happy for ya
@here-i-am2316Ай бұрын
He keeps changing
@waynekibich3753Ай бұрын
Nice way to start my work week with a new video from yup folks
@OfficialSlowRollerАй бұрын
Love watching reason I got my CDLs ended up having my truck turn over so as bad as I love trucking I don’t think I’ll be able to get another one keep going and stay safe out there
@melvinolsen3171Ай бұрын
keep turning them up
@ChristianandFamilyАй бұрын
Vehicles talk to each other and plan to break almost in unison, I'm convinced of that Tim, happens to me all the time, they talk at night while we sleep.
@jonnothetruckerАй бұрын
I'm not superstitious, but I swear you're 100% right !
@ssonny7078Ай бұрын
I third this motion. My truck and my car conspired against me and you can't convince me otherwise!
@jonnothetruckerАй бұрын
@ssonny7078 jumped in the truck last friday for a few loads, flat battery, jumped on the Harley Saturday, flat battery, not sure what's next, but probably another flat battery 🤣
@drewbaucom7518Ай бұрын
Just remember y’all if you see a green fog around the Dixie boy and start hearing who made who in the distance it’s the end 😂of the
@RobJohn80Ай бұрын
I have seen many cracked paccar mx-13 heads and they all crack for the exact same reason. Whoever is tuning those paccar engines does not know what they are doing. From the inception of diesel emissions the main focus has been reducing NOx emissions and NOx creation occurs when fuel is burned at high temperatures so manufacturers introduced egr system to lower combustion temperatures by introducing inert gas into the cylinder which lowers combustion chamber temperatures. You can't just eliminate the egr and expect the engine to run properly without completely retuning the engine to change the way it operates. Incorrect tuning is what causes the paccar MX-13 heads to repeatedly crack. The engine manufacturer tuned the engine with the expectation that the egr gases are going to be there to limit combustion chamber temperatures and that is why the heads are cracking. When the first emissions requirements came out engine manufacturers adapted emission equipment into preexisting engine designs but that is not the case anymore since engines are designed around emissions systems now. To properly tune any engine one must properly understand the combustion process and how an engine operates. You will continue to have cracked paccar heads.
@Jm-is9igАй бұрын
I think this is the case for all his trucks. He keeps turning up the power on all his trucks and they're running way too hot that's why he's always got problems
@hahatruckingАй бұрын
@@Jm-is9ig I guess you know it all huh
@JohnLaws-sg8yhАй бұрын
@FSC_Trucking1 really you know as well as any of us, Timmy runs old woreout junk, and the first thing he does is turn them up.
@JohnLaws-sg8yhАй бұрын
@stupadaso7948 Well, I've watched both your channels, and you seem to have a decent channel. I've been watching Timmy for 5 years, almost. He never finishes a project. He's all over the place with false b.s. that never materializes, and you know it. Look through the comments on all his videos. Why would the vast majority of commenters just decide to become haters? Because they see through his B.S. Ask his wife how trustworthy Timmy is.
@RobJohn80Ай бұрын
@@Jm-is9ig With the paccar engines it is due to deleting the emissions systems. The paccar needs the egr to cool the combustion chamber to keep the head from cracking. Deleting a paccar requires extensive tuning to keep the cylinder temperatures within the safe range.
@jeffneiderhiser1573Ай бұрын
Holly you got a new friend Someone keep you company while you riding in a big truck
@Jm-is9igАй бұрын
Another puppy.... Tim you definitely were a bad bad boy😂😂
@TheSteelman66Ай бұрын
I would Defiantly Buy a Conestoga Screw all that Tarping.
@tate8020Ай бұрын
Sounds like a bunch of fuckin junk equipment. I agree with the dude that said he feels safer with Tims junk off the road.
@moondog3162Ай бұрын
That's the truth....
@dieseljett1Ай бұрын
10R-8501 is the Cat Reman number for a 57 injector
@edwardwilliams9874Ай бұрын
Glad roosters back in action brother yall take care be safe 🙏 prayers for lil holly 🙏
@brianwagner8779Ай бұрын
why the new shop? How about a video on the new shop
@dynogt16Ай бұрын
It's in the live videos
@KellyRaxterАй бұрын
I'm so glad to see you back. Your channel is one of my best channels on KZbin. I love to watch
@justinjohnson1429Ай бұрын
I thought Steve was getting the rhino lined classic did he quit and I thought Bryce was moving back to his home state?
@nedkelly9688Ай бұрын
Yea he said ages ago Steve is out doing his own thing now.
@brycemiller2520Ай бұрын
I moved back to my home state last week
@stevebisbee2481Ай бұрын
Brax is an amazing young man. Can drive and back those trucks and work on them. At his age, that's amazing !! If he was to lean gasoline engines also, he would be able to work anywhere he wanted !! He's amazing !!
@jameshead4185Ай бұрын
10R 8501 are 57s small injector
@nathancarr6397Ай бұрын
Calling stock 550 injectors big😂
@nathancarr6397Ай бұрын
And prying on the solenoid to get the injector out lol
@jameshead4185Ай бұрын
@nathancarr6397 59s he says an blew gasket cause of all the boost on the hot side. junk pdi manifold
@krazzykustoms1Ай бұрын
10R is reman too. Dont think brand new injectors are even available from cat.
@nathancarr6397Ай бұрын
@@jameshead4185 he told the guy at the machine shop it was 2800 for that manifold lol. About 1000 high on that but whatever
@deantait8326Ай бұрын
Oh gosh are you running a trucking company or a MASH unit for semi tractor… yikes. Keep on Truckin’ and yes I’m that old and I still love Trucks !!!
@leofrac435Ай бұрын
Where’s the wife and baby Tim ?
@Jm-is9igАй бұрын
Gone
@nedkelly9688Ай бұрын
Someone said above they are getting divorced and she has a protection order out against him all on county records. but i tried searching and found nothing...
@edwardwilliams9874Ай бұрын
Howdy good evning yall
@STREETRUNNERZ_LLCАй бұрын
Make sure them trucks are up to standards, when trying to get into the tankers business. You will loose contracts a Hella a lot faster. Blessings to you Tim.
@ceciljdixon1488Ай бұрын
Been watching for awhile now enjoy your content Rooster a beast
@beckyumphrey2626Ай бұрын
A trucking company with few running trucks.
@donnellwilliams3988Ай бұрын
Like wayne o on ol two stroker says let's take her for a rip, rooster sounds him self again 💪💯
@jasonst.jacques9086Ай бұрын
No we are getting out of the boat business WTF. Didn’t Tim say he was gunna start hammering hauling boats a few videos ago. Man I love the trucking and family content but stick one thing out man and see it through. Constantly moving or changing directions we can’t even keep up. But keep the content coming
@tnolan3176Ай бұрын
He is always changing direction !
@troyshaw2239Ай бұрын
what happens when you beat the snot out of your equipment and crank up the computers
@trentwatts4913Ай бұрын
If you think brax gives a dang what they say you wrong! That’s my guy for real stay like that do not worry bout them little ppl!!
@greghowse3767Ай бұрын
Hey Tim its great to see Bryce back with you as he has been scarce
@JohnLaws-sg8yhАй бұрын
Brice quit! There's a reason you aren't seeing Brice or Timmys family in any of his videos lately.
@bigpaulrc3531Ай бұрын
Hi Tim all the way from Yorkshire England when i started driving trucks way back in 1980 it was all rope and sheeting we had straps then it was all fancy rope notts it would take a hour or so it cover a 40 feet trailer love your content keep it coming you need to turn the boost down a bit loads of powers good but too much makes it unreliable
@Louie2309Ай бұрын
The company tow trucks are flat out dragging all the dead shitbox trucks back for repair. At least those trucks are paying for themselves.
@alkennedy1124Ай бұрын
It’s a good idea to stop turning up these trucks, just a turning down smoke ,would give them a ton more power, thanks BigAl California.
@ChrisHarding-lk3jjАй бұрын
Coal is just a sign of poor tuning and over fueling, money literally just blowing from the exhaust. Tuning without a dyno and proper data logging is just a crap shoot.
@keeganpock864Ай бұрын
And where theres smoke theres egts lol
@rce8540Ай бұрын
Yes I could never understand why he wants his truck to smoke. I figure there is something wrong if it does.
@ChrisHarding-lk3jjАй бұрын
@@rce8540 Some people think rolling coal is cool and it shows you have power. The same type of people think loud exhaust sounds good when in reality it's just noise pollution.
@hahatruckingАй бұрын
My truck, Orwell does a champions work.. It's a 1984 Peterbilt 362 cab over. No modifications.
@edwardwilliams9874Ай бұрын
Lol poor lil holly she cant stand chip around specially brax holding and loving on the new puppy but she is so cute she your new truck pup
@justme7995Ай бұрын
This had as much excirement as watching paint dry🤣🤣🤣🤣🤣
@ky.gambler5281Ай бұрын
Are you gonna take Bruce Wilson up on calling out rooster to the dyno test to check the actual H.P. ?Another Q, did y'all lose the boat contract or did bidenomics kill the industry?
@nelsonleeyikang8545Ай бұрын
I remember you posted on Facebook that you got that manifold from Momentum Worx
@jarekchalupka4280Ай бұрын
Hey would help fix this up in the future soon lol? 1979 flc with 400bc 13 speed triaxle dump tryck
@user-kg4eb7nl5bАй бұрын
4th of July Fireworks 😏
@bobf5911Ай бұрын
Maybe it’s time to get some newer equipment. Been doing this for 40 years and I love my older stuff, but just like us these older trucks get tired.
@duanemerrick-qy9cnАй бұрын
You know the best thing of this video was no promising stuff you cant keep your word that was a good video and knock off the talking about haters and people who have acdifferent Opinion about things they dont like because the more you say something the more there feeding on it keep up the great videos 🎉
@goldhunter9641Ай бұрын
Tim after this hot as hell summer we’re having which I think is wonderful weather honestly, I believe the boat sales are going to skyrocket with it being election year or not and you better hang on to some of those boat trailers honestly because I think you’re going to get busy for quite a while
@JohnLaws-sg8yhАй бұрын
So the economy is going to get better because it's hot, and that's going to make boat sells skyrocket lmmfao!!!
@user-zr1ij2tm6uАй бұрын
Your certainly very busy with moving and work....great to see....Hope everything goes good for you Tim and family....your worth it...Stay safe
@bigbellyrebuilds2778Ай бұрын
LORD JESUS CHRIST MY SAVIOR please keep your hand of protection over the Gentry family and see them through this time of trouble in Jesus' name pray Amen
@ronfitzsimmons6737Ай бұрын
Why do you leave engine brake on when you are shifting up? Got to be hard on drive line.
@danrogers8583Ай бұрын
The same reason he has bump the throttle when driving the trucks. Sounds cool. Billy big rigger.
@johnnycates4333Ай бұрын
Sounds stupid maybe that's why the mack has a driveline down
@danrogers8583Ай бұрын
@johnnycates4333 or maybe the corronado that had a carrier bearing explode. Just sayin.
@johnliebermann4643Ай бұрын
Also hard on the engine to get slammed around. Much better to roll the engine to match gears on downshift and wait on up shift.
@georgeflavin5626Ай бұрын
How is Holly doing
@hahatruckingАй бұрын
It's a dog. Probably good as a dog.
@TheSteelman66Ай бұрын
I have to Say Tim You are one cool Dad.
@mikenano8046Ай бұрын
Sounds like someone knows something!!!
@ChrisHarding-lk3jjАй бұрын
The best way to remove those broken bolts is with an edm machine. You can buy studs where each end is a different size so you can oversize the manifold holes and keep the turbo the stock size.
@jeffreymartin8031Ай бұрын
Hey Tim how are you doing today my love so how is Brax doing today and how is holly the dog and I love watching your KZbin videos they are very educational videos
@fasteddiesgarage5000Ай бұрын
You guys gotta stop turning those trucks up cause they blow up😂
@nedkelly9688Ай бұрын
Yea Aussies pull huge loads with less power all the time..
@GRANITEMONUMENTАй бұрын
Can we get a review on painting your truck with rhino liner?
@mikeh524Ай бұрын
No.
@GRANITEMONUMENT24 күн бұрын
I kind of thought rooster had a lot of very light loaded miles, I can’t remember it pulling max gross ?
@RandallByrd-oi4fzАй бұрын
Awesome video thanks for sharing
@ey231Ай бұрын
Hey Tim, Cat power gen tech in Florida here. Not sure if you knew it or not but the 10R-8501 is a reman injector. I don't know your serial no. Prefix but there are a slew of different injectors based on application and serial. But for example a new injector for a 3406 6TS ser. No. Is a 211-3021. Any part with a 10R or 20R prefix is a Cat reman part.
@scottadamson2431Ай бұрын
For the loads you are doing with Bonnie a Conestoga or as we call them in Australia a curtainsider would probably be worth it as long as there are not to many overwidth loads.
@youdontmatter2737Ай бұрын
Thats truckin. If it aint one thing its another
@Bigg-Edd352Ай бұрын
Hey Tim! I have a suggestion! Why don’t you finish up the Air Force cabover, get it insured and put it to work! It has a working engine and everything!
@ky.gambler5281Ай бұрын
Never happen, it was junk when Bruce had it..
@tnolan3176Ай бұрын
Its obvious he doesnt have time to work on any of the projects he started ! Plus how long have we heard him say all the trucks he was going finish and didnt ! I dont expect any of them to be finished ! He has a bigger lot to store them now !
@mikeh524Ай бұрын
Could you show us the units that don’t need major work?
@tnolan3176Ай бұрын
Thats what I thought hie was doing at the beginning of the video ! He said he was to go over what is going on with each truck in the fleet but only talked about 5 of them that needed work !
@ralphups7782Ай бұрын
the look on holly's face when she saw braxton nursing the new pupy, was like when i was born and my older brother went from being mums little darling to second choice over night. and he would let me know at all times too 37:50/47:47
@veteranga7529Ай бұрын
Regular #Maintenance is Key to running a successful #TruckingBusiness, do not ignore this, it will put you #OutOfBusiness! A trucking business also requires Experience #DieselMechanics too. When all your problems start dropping such as #FleetTrucks and trailers all of a sudden #Breakdown at once, this tells me #MaintenanceIsLacking in your business 🧑💼. Something needs to change to be a successful business. 👨💼
@Furggy718Ай бұрын
Why the fuck did you use so many hashtags?
@veteranga7529Ай бұрын
@@Furggy718 you saw my reply, it’s very attractive and noticeable, isn’t it?
@JK-ux6vrАй бұрын
@@veteranga7529 no
@Furggy718Ай бұрын
@@veteranga7529 no, it looks like someone’s middle aged uncle just learned about hashtags yesterday.
@RonsHorseАй бұрын
Damn,Rob built this engine 16 months ago and you only have 16000 miles on it and screwed it up !! Probably best if your Dad went ahead and FIRED YOU !! Please take BraxTon to Speech Therapy !!
@Jm-is9igАй бұрын
Ouch
@Peter-ij2zh28 күн бұрын
And maybe a dietitian too
@petera.laceysr.28Ай бұрын
Hi Tim & Braxton congrats on moving to ur new shop & yard keep on trucking May The Good Lord Bless ur family May his spirit shine upon ur family peace be with ur family always
@chrisburt7849Ай бұрын
It's great that ur expanding the business and fleet , but wat about when u turn up at a job with the floor busted out of the trailer like the one on Bonnie ? Customer looks and thinks wtf , he don't look after his gear ???
@LorettaThompson-pg6eqАй бұрын
Another nice video and god bless
@boggsr2Ай бұрын
Sure good to see your dad again 44:58
@garycovell2913Ай бұрын
Tim If you want to learn how to tarp.....watch Trucker Dan's videos. He runs flatbeds only
@jeremypociask9873Ай бұрын
That was a awesome video it is nice to see 🐓 running good he is looking awesome hope you all have a blessed night god bless and it is nice to see you guys back 👍🙏❤️💯
@theresters1Ай бұрын
WHAT HAPPENED TO THAT BIG ASSED WRECKER YOU JUST BOUGHT? HAVE I MIST SUMPIN' BUD?? ROOSTER? I WATCHED YOU BUILD HIM FROM THE MUD FLAPS UP! YOU DOING THE MAINTENANCE TIMELY? AND HAIL NO! I AM NOT TRYING TO RAISE YOU TO A NEW HEIGHTS OF PISSTIVITY! I LOVE YOUR VLOGS, RARELY DO I COMMENT, I GUESS I AM JUST KETCHIN UP, LOL! SAFE RUNS ON YA! AND GOD BLESS YOUR ENTIRE BUNCH!!!
@kennytownzen1236Ай бұрын
I didn’t call him a liar simply just turn it down, if he keeps breaking simple solution😂
@alanlanghorn9528Ай бұрын
Well shit happens that the side of trucks you drive them hard they blow up cost money side of owning a fleet .
@jimmym1192Ай бұрын
Hey 👋👋 Tim Bruce Wilson has a really nice mack semi if you are looking for another truck get ahold of Bruce and ask him about the mack it's a good looking truck 740000 plus miles on it and it has a little motor to run the AC and the heat
@danielloveall2952Ай бұрын
Tim don't be ashamed to loving your truck I love trucks myself and also you did an awesome tarp job but that's really good
@Bjarne045Ай бұрын
As not knowing the American trucks and transmissions, I just wonder if there is a “universally fitting” motor you can use for multiple trannys? This way you would always have 1 extra, rebuild read to be used when a truck has engine trouble? That would be nice? Cost saving as a truck that is having engine troubles will be out on the road faster to contribute earning money.
@robertsmith7580Ай бұрын
Just bring his family here you need him !
@JustinLabsАй бұрын
Are you abandoning the channel because it sure seems like it.
@nedkelly9688Ай бұрын
Brax keeps mentioning the burnout truck, have you ever heard of the Bandag Bullet truck from Australia, think still holds world record for world fastest truck, think 14 seconds in the 1/4, But did run 12 or 11's seconds in the end,18 seconds from full stop 0 to 1 Kilometre distance, that is 0.6 miles and doing 300kmh by time reached it, 186 miles per hour. 16v92 Detroit with 2800hp,, have seen this thing in real life doing burnouts and it cams over like a animal..
@user-tq4bx4uo9dАй бұрын
What’s up brother keep up the good work brother
@beckyumphrey2626Ай бұрын
The S in Illinois is.silent....
@keeganpock864Ай бұрын
Grammar? Imma drive me trok for living
@BradJewettАй бұрын
Hello I'm brad in Winnipeg canada,I love your stream,the relationship with your son is awesome,plus brax is a good kid,,love the stream,you would love my truck ,,don't know how to get pic to you,hope I hear from ya