The MK60EC1 ABS Coding and Basic Settings

[@jamesmanser6385]

This worked first time. Loving your software and the support you offer to newbies like me.

[@calummanchini-si6cr]

Big help worked for me with no issues. Thank you for posting this.

[@1127r]

This info was so useful just brilliant

[@hotice3181]

Thank you very very much for this video Happy New year. Two questions pls 1.Do all cars have same ABs long code? values? 2.Do i need to seek the same way for Golf 5 and AUdi? Thank you very much.

[@ivanvega2821]

If you do all these steps and after everything is codes and adapted/basic settings. If I were to disconnect the abs module/pump. Will I have to do it all over again?

[@zelda8697]

How do you get the old Abs coding.??? 2013 vw Passat

[@zimingLi-h3e]

旧的ABS 能通讯就可以，或者直接在线。

[@danhirea6247]

Can be the MK60E1 be retrofitten on a bmw e90 ,2l d ,rwd drive with MK60 ?

[@bigjake352]

Thank you for video it’s been huge help, I get all the way to the point of channel 026 basic settings.. at same point during those settings (second value) it fails every time, error 04. Any thoughts? Tried already making sure it was not getting hot

[@chriiss6936]

Will thia code work for 2012 beetle

[@茂密的森林]

May I know, is this video suitable for 2013 1.4 TSI Scirocco? Thanks!

[@omararturozavaladestephen6537]

Excellent video helped me to reprogram my abs module

[@justme8956]

Hi Guys, I replaced module with a newer unit, coding accepted but after sleep mode lost his coding again , what I do wrong

[@ThEmEsSiAh187-CFGeorge]

Question, original long coding has 35 numbers and letters, while the used one won’t let me write more than 32. Maybe incorrect part?

[@LewisSterling]

scanned my long code from the old pump, plug in the new pump and put the code in and it rejects it, have tried another pump and it does the same. can’t figure it out, any help would be appreciated

[@RossTechVCDS]

We offer vehicle support for our customers on our free web forum: forums.ross-tech.com Post an Auto-Scan on the forum and we should be able to help out.

[@saherallil3628]

Can you help me with Reset counter 49 on vcds

[@ibamarsilva8512]

Onde consigo solicitar um long code ou encontro a calculadora?

[@vyomsinroja1208]

I’m getting No response from the controller what to do?

[@sadhifi]

Hello. I want to buy the original diagnostic machine VCDS . from where can I buy it?

[@haakonp]

Whats the name of the tool used to code the new ABS unit ? And where can I get it ? Thanks alot

[@RossTechVCDS]

VCDS by Ross-Tech. store.ross-tech.com/shop/cat/VCDS/

[@Rafa-Rios]

Hello, very good video, do you think this helps me to encode the ABS module of my GTI MK6 2013? Greetings and thanks !

[@chaturanga]

how did you go Rafael?

[@Rafa-Rios]

@@chaturanga In the end I bought the complete ABS module after sales and it worked for me, greetings and thanks

[@dagnijapuce6181]

0@

[@zelda8697]

​@@Rafa-Rios can u elaborate on tht pls. Wht u mean the complete and module? R u even able to not buy the complete module??

[@ventsislavstefanov-g8o]

hello i have 1KO 907 379 CD can i swap it with 1KO 907 379 AC?

[@RossTechVCDS]

used parts? forums.ross-tech.com/index.php?threads/1997/

[@TheCostinel26]

Hello, what means this code error 03409 on module 3 abs?

[@Vlad-zg5sk]

Have an abs module that won’t take the coding but says it’s accepted any tips?

[@katmarmalade9846]

It may not save unless after coding you go through the basic settings and turn off the ignition. You're ahead of me - I can't get anything to accept.

[@CaglarKaptan]

Here is my problem after mechanic shop change steering wheel rack, ABS / Traction control yellow light and ESP error show up. Address 03: ABS Brakes Labels: 1K0-907-379-60EC1F.CLB Control Module Part Number: 1K0 907 379 BE HW: 1K0 907 379 BE Component and/or Version: ESP MK60EC1 H31 0108 Software Coding: 113B200D212B00FB880C04E984190050310000 3 Faults Found: 01309 - Power Steering Control Module (J500) 008 - Implausible Signal Freeze Frame: Fault Status: 01101000 Fault Priority: 3 Fault Frequency: 1 Reset counter: 13 Mileage: 228813 km Time Indication: 0 Date: 2018.07.11 Time: 12:36:18 Freeze Frame: Count: 3 Count: 14 Count: 12800 Count: 8212 Count: 51968 Count: 0 Count: 1 Count: 47 01486 - System Function Test Activated 000 - - Freeze Frame: Fault Status: 01100000 Fault Priority: 2 Fault Frequency: 1 Reset counter: 13 Mileage: 228813 km Time Indication: 0 Date: 2018.07.11 Time: 12:36:18 Freeze Frame: Count: 3 Count: 14 Count: 12800 Count: 320 Count: 51968 Count: 0 Count: 1 Count: 47 00778 - Steering Angle Sensor (G85) 004 - No Signal/Communication Freeze Frame: Fault Status: 01100100 Fault Priority: 2 Fault Frequency: 1 Reset counter: 13 Mileage: 228813 km Time Indication: 0 Date: 2018.07.11 Time: 12:36:18 Freeze Frame: Count: 3 Count: 14 Count: 12800 Count: 166 Count: 51968 Count: 0 Count: 1 Count: 47 Group 60 adjustment status is not possible / steering angle sensor G85 N/A

[@shaagealgareb9189]

thank you ...

[@Nohandleneeded101]

Hi, is anyone able to assist please? I removed and reinstalled the same cluster in a 58 Golf Plus and the abs code was wiped (not sure why) I found the code from an old scan but it won’t accept it it states code is out of range??

[@vyomsinroja1208]

You need to get a new code from another car which has the same part number then try the coding.

[@TegrtyRacing]

What gen vw are you using

[@RossTechVCDS]

The car shown in the video is a 2012 Golf R. The car itself doesn't matter, MK60EC1 is MK60EC1 regardless of the sheet metal it was installed into.

[@veli-mattipatinen203]

How can I identify mk60e1 from mk60?

[@jef4130]

MK60EC1 is identified in the Component field.

[@veli-mattipatinen203]

@@jef4130 where can I find that?

[@roybm3124]

@@veli-mattipatinen203 @0:51

[@veli-mattipatinen203]

So, there is no way to identify it without connecting it to some program?

[@roybm3124]

@@veli-mattipatinen203 What kind of car do you have model + year?

[@αισχοςντροπη]

Anyone for audi tt 8j 2.0 tfsi manual quattro?

[@simpleman8584]

Hi do you offert services with team viewer please thnk you

[@CesarGonzalez-gh5ys]

Help me coding for audi a3 2007

[@bojanpetrovic3895]

Thank You (y)

[@francmodolo463]

Ford Falcon's are the best!

[@Antovic2001]

Wont accept security access

[@江彥函]

One quEstion plz Can I coding without the engine start?

[@marcocolangeli]

Ciao mi servirebbe il codice golf 4 130 CV 1.9 tdi 2002 1j1 per ABS.

[@CesarGonzalez-gh5ys]

Mk60

[@MultiSheil]

Put a post on Ross tech have gave all the information on the new user post no luck however no one ever looks at the new user posts