Rotary Spindle Sander without Insert Plate / DIY

  Рет қаралды 20,626

Kynosys

Kynosys

Күн бұрын

Пікірлер: 32
@Kynosys_
@Kynosys_ 3 ай бұрын
The spindle sander I'm using had a few inconveniences. The height of the insert plate did not match the surface, making it difficult to sand the wood. Also, the iron surface was heavy and good, but its small size made it inconvenient when sanding large pieces of wood. To solve these problems, I removed only the motor part of the spindle sander I was using and remade the surface plate in a larger size. What's unique is that they created a rotating plate without the need for an insert plate, making it possible to use all six types of round sandpaper. Magnets were installed up and down so that it can rotate and stay in place. Therefore, the spindle is placed in the correct position. The dust collection performance is also very good, so I can use the spindle sander without worrying about dust. I think you will see it often in my videos in the future. If you enjoyed the video, please subscribe and like. Thank you!
@simonr6793
@simonr6793 3 ай бұрын
Kynosys, it's about time that we have a shop tour video showing everything that you have done to make your workshop so envious to the rest of us 😃. As always buddy 💯% 👍 🇬🇧.
@Kynosys_
@Kynosys_ 3 ай бұрын
Thank you very much for your deep interest in my workshop. Actually, my workshop is not that big. So, I am still thinking of various ways to increase the density. I will try to make a workshop tour video soon.
@GiancarloFiorelli
@GiancarloFiorelli 2 ай бұрын
Ogni volta che presenti una tua invenzione è sempre impossibile non rimanere estasiati. Sei un genio. CHAPEAU Giancarlo
@homemadetools
@homemadetools 3 ай бұрын
Nice work modifying this spindle sander. We shared this video on our homemade tool forum last week 😎
@ron0126
@ron0126 3 ай бұрын
Great build but I just made new inserts. Quick and easy.
@Kynosys_
@Kynosys_ 3 ай бұрын
Yes. You are right. Rationally, I was thinking that too. But before I knew it, I was surprised to see myself disassembling the product. Having a DIYer's heart can be very tiring. But I'm still happy. thank you!
@bradleytuckwell4881
@bradleytuckwell4881 3 ай бұрын
Superb idea it looks awesome and works beautifully
@adobols
@adobols 3 ай бұрын
Good Idea
@Guillaume-n7w
@Guillaume-n7w 3 ай бұрын
Superb video ! I am curious about the font you use on your video thumbnails, is it a custom one ? Thanks and keep the good work 😊
@Kynosys_
@Kynosys_ 3 ай бұрын
The font we use for our thumbnails is "Tenada". It is a copyrighted font, thank you 😊
@manuelaguiarbetancor2693
@manuelaguiarbetancor2693 3 ай бұрын
Siempre grandes diseños Siempre grandes modificaciones Gracias 🇮🇨
@TheBillPayingHobbyists
@TheBillPayingHobbyists 3 ай бұрын
Genius. Thank you for sharing. Another great idea.
@wollokao
@wollokao 2 ай бұрын
Perfect!
@Kynosys_
@Kynosys_ 2 ай бұрын
Thanks for your praise!!!
@tjacksonwoodworker3726
@tjacksonwoodworker3726 3 ай бұрын
Great job like all the things you build.
@Kynosys_
@Kynosys_ 3 ай бұрын
Thanks for your sincere words!!!
@TheStabbedGaiusJuliusCaesar
@TheStabbedGaiusJuliusCaesar 3 ай бұрын
Great project.
@Kynosys_
@Kynosys_ 3 ай бұрын
Thanks a lot!
@gillesrenaud948
@gillesrenaud948 3 ай бұрын
Again very cleaver keep up the good works
@BrandonCabanillas
@BrandonCabanillas 3 ай бұрын
Genius.
@Kynosys_
@Kynosys_ 3 ай бұрын
Thanks for your interest!!!
@beewagyu
@beewagyu Ай бұрын
Do you mind telling me What type of air cylinders you're using? Thx
@mike.s.Keller
@mike.s.Keller 3 ай бұрын
Tolle Idee und super umgesetzt 👍
@vincechoraszewski2394
@vincechoraszewski2394 3 ай бұрын
Great build, do you have anything up your sleeve for a boss spindle sander for Delta
@tattyheid7279
@tattyheid7279 3 ай бұрын
Epic 👍👍
@timthegr8est828
@timthegr8est828 2 ай бұрын
У станка какой мошнсть ?
@Kynosys_
@Kynosys_ 2 ай бұрын
Это двигатель на 220В. Я оторвал его от готовой шпиндельной шлифовальной машины. Спасибо! This is a motor for 220V. I ripped it off a ready-made spindle sander. thank you!
@timthegr8est828
@timthegr8est828 2 ай бұрын
@@Kynosys_ 220v , watt ? 😁
@Kynosys_
@Kynosys_ 2 ай бұрын
@@timthegr8est828 This is a 2000rpm, 450w product. thank you!
@PeterNetped
@PeterNetped 3 ай бұрын
@Green4Life
@Green4Life 3 ай бұрын
kzbin.info/www/bejne/f2mYmqSAqtWopNU In this timeline, I'm curious as to why the FDFN male insert spring wasn't used to adapt the MDFN female insert spring on the base. A direct plug would take up space, and there are actually FLDNY L-type female insert springs. Should be safer and more aesthetically pleasing than direct soldering. Also the wires are stripped too long, I would fold them into a U shape ^_^. The translation may be wrong, I don't know how English describes this kind of cold connection terminals.
Build a Drill Press Table for PBD 40 / DIY
17:19
Kynosys
Рет қаралды 60 М.
Top 7 Table Saw Upgrade Compilation / DIY / Compilation
22:41
ТЮРЕМЩИК В БОКСЕ! #shorts
00:58
HARD_MMA
Рет қаралды 2,5 МЛН
They Chose Kindness Over Abuse in Their Team #shorts
00:20
I migliori trucchetti di Fabiosa
Рет қаралды 12 МЛН
HELP!!!
00:46
Natan por Aí
Рет қаралды 76 МЛН
4-in-1 Sanding Hacks to Make Woodworking Fun
21:46
JSK Projects
Рет қаралды 351 М.
This weird clamp will save you hundreds $$$
14:49
Busted Knuckle Woodworks
Рет қаралды 125 М.
🤜 S P I N D L E __ S A N D E R 🤛
35:26
GRINwood
Рет қаралды 3 МЛН
I Over-Engineered this Machine, cause Manufacturers Didn't
1:23:24
Marius Hornberger
Рет қаралды 1,9 МЛН
DIY Disc Sander & Belt Sander machine
24:54
JSK Projects
Рет қаралды 456 М.
Amazing Drill Press Table Lifting / Motorized System / DIY
24:59
Making Horizontal Drill Press / DIY
26:03
Kynosys
Рет қаралды 17 М.
Table Saw Front Wing / SharpMax / DIY
12:08
Kynosys
Рет қаралды 9 М.
Beginner to full-time woodworker in 2 years. It's entertaining, I promise
1:31:28