Rotary tattoo pen (stigma) unboxing Review and setup

Unboxing and review of stigma rocket tattoo rotary machine pen Style. Second part of the video I go on to show you how to set it up and tips and tricks. I did not use this machine and this video to tattoo anyone it was only for demonstration purposes

[@mskutney]

Thank you for your educational tutorials. It helps to have the proper information before attempting anything that involves penetrating flesh, or in this case our protective membrane... Some of you should really think about the seriousness of that fact!# Thankful

[@FuzzelBuzz]

Thanks for the video! This may be a dumb question, but what are the packaged isolation rings for?

[@Dessthemess]

Thank you for this!

[@aliceswan3038]

Thanks for the review, man👍👍 setup was very helpful

[@gregd8735]

No problem

[@tanc2316]

Thanks for the review and setup! How do I turn it on once it’s plugged into my power supply haha. My power supply is turned on

[@gregd8735]

It's plugged into your power supply it should come on with the foot pedal. Going to have a foot pedal plug into the power supply also you operated just like you would have coil machine do use the foot pedal to turn it on and off

[@levianlibyan4607]

Have you done any works on it? How’s the performance?

[@levianlibyan4607]

I’m about to order one for me. Hopes it works 👍🏽

[@lukecartwright4405]

How did you get on with it?

[@sht5499]

I had a BAD experience. From the beginning, sometimes the needle stayed out after I stopped the machine, I said that maybe it will recover in time, but the problem has worsened. After I sent the machine under warranty I found out that you have to pay a service fee of 20 euros just to check the machine(the machine is under WARRANTY) After they checked it, they said that I used needles without a membrane and the ink ran in the machine (I only used kwadron and cheyenne, cheyenne have a membrane that is too strong for stigma, they also said, so be careful with "all major cartrigde brand ") Overall they tried to find all sorts of reasons to blame me for handling bad the machine, and not giving me the guarantee. And now I have a stylist stigma that stays in the drawer because I didn't want to pay for spare parts and repairs (134 euros) even though it was under warranty

[@Dave-91]

im sorry did u watch someone else try and set this up and u make a video out of this yourself. Because a lot of the things you did were incorrect by covering the rotation to where u can adjust the depth of the needle. Also you never want any tape near where you have to unplug your machine You can use a rubber band instead to make it secure, you can run the cord straight threw the blue clip cord cover and not have to break the cover so it goes straight threw with no rips. Also when you are trying to explain something or show something you know 100 % what you are doing first, just FYI

[@lukecartwright4405]

cnc q3 would be better for the price of 110 uk pounds adgstable stroke by twisting it, ive tried everything and lines were poor. low volts to high it might be good for finger tattoos tho!!!!! imho???? im buy cnc q3 today i think

[@florinajoelle7464]

For what are rubber bands

[@maedavis5202]

Why does the needle not move up and down on the stigma machine. Could you help me please?

[@lukecartwright4405]

I have this machine but can’t do much with it! It cuts through the fake skin and is super painful on real skin!!! Did you manage to pull good lines with it? Mines going in the bin I love coils!!!!

[@invisiblegrey4953]

I Have one and its Good actually. Less vibration and the motor sound like a sleeping cat.

[@overthink2020]

Is it Good machine ?

[@invisiblegrey4953]

@@overthink2020 Yes its a good machine... My advice is use a descent cartridge needle for it👍✌️

[@karroyoan]

Is this the machine that Amazon sells? what is your opinion right now?

[@gregd8735]

Not bad.. Pulls clean lines

[@saffygaffney1448]

I have the same one in complete black can I ask what’s the elastics are for and where they go or don’t I need it on this kit

[@overthink2020]

I order it i hope be a good machine

[@tomaszborczyk1416]

How's your machine

[@overthink2020]

@@tomaszborczyk1416 thats so good

[@lukecartwright4405]

Any good?

[@overthink2020]

@@lukecartwright4405 i still working with this machine

[@torymorales5384]

Es buena esa máquina???

[@Widukind97]

The Clipcord Cabel is in the Box?

[@gregd8735]

Yes

[@jhonnycharry4694]

Que tal sale esta máquina ?

[@rowilanthonypopelo3791]

Same pen 🤔

[@rowilanthonypopelo3791]

I have one

[@markwheatley5264]

I bought this from amazon and the description says the stroke is 0 - 4.5.how is the stroke adjusted?

[@lukecartwright4405]

Good question

[@burna803]

I believe they come in a 3mm stroke. The needle depth is adjustable from 0-4.5mm

[@lukecartwright4405]

yea its 3mm but can adjust the the needle depth is all

[@carloszepeda9132]

I have a question, should the grip needs to be sterilize after the work is done? Thank you.

[@gregd8735]

Take everything off of it. Then sterilize the whole unit

[@carloszepeda9132]

@@gregd8735 Thank you for the answer so... the stigma grip should be sterilize then. I appreciate it

[@keiranshearer4822]

Why to people put like plastic bag stuff around the cables

[@gregd8735]

To keep a clean surface in case in touches the customers skin

[@keiranshearer4822]

@@gregd8735 appreciate you

[@keiranshearer4822]

@@gregd8735 can you tell me do all these new cartleges fit any pen gun ?

[@gregd8735]

@@keiranshearer4822 should fit most

[@thwuichingmarma140]

Bananu kono sisteme