Rotator work ep

A driver blew his radiator while he was pulling a large excavator the closest place to get the truck and load to was the TA they also had ordered the radiator already before they ordered the tow so the TA was going to do the repairs so they had called us out to come tow there truck and load back to the TA
Once we got there we determined we would be able to tow both units the short distance it needed to go we hooked up to the axel strapped it to the t-bar and threw our safety chains on aswell as dropped the drive line and ran air lines to the truck and trailer once we had loaded up we towed it one exit north to u turn and head on exit south to the TA
I hope all enjoyed this clip thanks for watching please leave a comment or email Malachi at [e-mail] thanks again for watching

[@leegoldeneagle9003]

Nice work looming good thanks 👍👍👍😊

[@andyb9767]

I had to stop trucking because of my health. Sold my Peterbilt, I miss trucking a lot. Every one of the videos sure makes the day go by.Thank you guys for letting us ride along.👍

[@McKaysWreckerservice]

I’m glad you can enjoy them and I’m glad it makes the day go by thanks a lot for watching

[@davidmckinzie6009]

Enjoy watching you guys do your thang, no mATTER WHAT IT IS OR HOW HARD THE JOB IS YOU GUYS DO AN EXCELLENT JOB. THANKS FOR LETTING US RIDE ALONG,OUT HERE IN SAN DIEGO AND COMPLANING ABOUT THE WEATHER nothing like what you have to put up with. You guys be safe

[@McKaysWreckerservice]

Thanks a lot I’m glad you enjoy the channel and the weather is normal you live in the Midwest you’re whole life climate change is nothing plus the cold keeps us a lot more busier than the warmer months thanks for watching

[@dgberry01]

ZEP makes an orange cleaner that will clean most of Jay's jacket. I used some on a pair of gloves that were soaked with diesel and oil and it came right out. It is available at home Depot

[@McKaysWreckerservice]

Thanks for that advice I’ll be sure to pick some up and try it out

[@trentbergerson2610]

Thumbs up for that turn off the exit alone. Even worried Jaybird!

[@McKaysWreckerservice]

Lol doesn’t take to much to worry the bird

[@lynnmoore2664]

As always great job done by Malachi & Jay. Really nice driving as well. Your a real great representative for the towing industry on many levels. Thanks for taking the time to share these with us. Stay safe & take care.

[@Acepilot2k7]

Hey Lynn, good to see you.

[@lynnmoore2664]

@@Acepilot2k7 Hey always great to hear from you as well

[@McKaysWreckerservice]

Thanks a lot I appreciate that as I do try very hard to do what we do and I’m very happy you enjoy the channel thanks a lot for watching

[@bighouse1283]

Good job Team 1140!!! Sure couldn't be scared of small spaces under the rear of that big dog!

[@McKaysWreckerservice]

Lol definitely spooked me tho once the axel was dropped even tho I knew he was doing it lol thanks for watching

[@anthonyjcarolan3161]

That's what you call a good 👍 driving 🚦 take that turn like a Pro I love ❤️ your video 📷 the are best thing I can't wait for the next video 📷

[@McKaysWreckerservice]

Thanks as always for keeping up with the channel very appreciated and glad you enjoy and turning now is like brushing my teeth a everyday simple task towed so many it becomes normal thing to do but boy when you get in a tight spot it can be tricky

[@alkennedy1124]

I ever work in under and out of from under the traffic side of the tow job, too meany of my Friends and other tow companies lost people dead from getting hit on tha drivers side of the tow job, no no no neve go under and come out from under the traffic drivers side, think smarter and safer stay alive. You can prepare the truck to be towed 100 % from the none traffic side, kool 45 to 55 minutes to get it ready to tow, kool thanks BigAl California.

[@djcrazy2685]

those drivers just fly by n probably wonder, why do accidents happen!!

[@TheEagle2688]

That could have hurt. Even after you said to drop I wasn't ready for it to come down that fast. You and bird keep up the good work and stay safe.

[@McKaysWreckerservice]

Lol it came down a little fast the sound is what got me and then I didn’t think I would clear it so I scurried on out lol thanks for watching

[@chicagojoe2737]

Long train ! Good job driver! Thanks for the video!

[@McKaysWreckerservice]

Thanks a lot glad you enjoyed it thanks for watching

[@reinaldofeijo7426]

Aqui do Brasil, sou teu seguidor no youtube. Teus videos são ótimos. Abraços

[@chrisread6103]

Good job guys...^5!👍

[@mckinleygodbolt9617]

It's always easy when you have 2 people on the wrecker

[@nossyhot]

for the jacket... dish soap on rag an no water.. rubb it around all olie an coolant an wash it off with Hot water ;)

[@McKaysWreckerservice]

Thanks for that tip

[@alangee79010]

You guys do a great job and still looks good even when you are freezing! Nice shoulder for that job as if they all could be that wide! Stay warm and be safe.

[@McKaysWreckerservice]

Thanks a lot always appreciate a nice comment thanks for watching

[@eugenebales4880]

Really interesting! LOTS of stuff to have to connect, disconnect. Thanks

[@McKaysWreckerservice]

Yea it’s not just hook and book when it comes to heavy work thanks for watching

[@alkennedy1124]

Oh u might need to put that wide load sign on the front of your truck, that is the legal way,kool how cold was it that day , ice everywhere,snow on the side of the road, thanks BigAl California.

[@liza.andkeithsimpson5081]

Great video

[@edwinschlee8374]

Great job guys. That was a heck of a load.

[@McKaysWreckerservice]

She was a bit of some work for her that’s for sure

[@boboften9952]

Jay take the diesel marks of your jacket with petrol then straight away rub it down with laundry powder and throw the jacket in the washing machine immediately . WORKS EVERY TIME . EVERY TIME .

[@stanpatterson5033]

Just dry-clean it. Only that is going to remove the stink of diesel fuel.

[@boboften9952]

Stan Patterson same thing as the petrol ( hydrocarbons ) break down the diesel and the laundry powder lifts the diesel / grease marks away . Cost would be ten minutes labor . You could even get a hot or cold drink ready while doing this . It is just so easy .

[@dandunning4409]

Not many people know to rub it down with diesel then rub in the detergent. Works every time.

[@stanpatterson5033]

Yeah, but I'd rather smell the smell of dry cleaning solution than the smell of gasoline. Besides, it's a company jacket, pretty sure their uniforms are supplied and maintained by the company.

[@dandunning4409]

@@stanpatterson5033 I have never had my coat smell of fuel, not once after it went thru the wash cycle.

[@uggy7]

Good job Malachi and Big 🐦. 👍👍🇵🇪🐕❤️❤️

[@McKaysWreckerservice]

Thanks a lot

[@liza.andkeithsimpson5081]

Beautiful truck

[@billmckelvey602]

Another great job by the Malachi and Jay team

[@McKaysWreckerservice]

Thanks a lot we always appreciate a nice comment thanks for watching

[@jim2757-w8m]

Nice video, in the UK we have a design standard called ‘construction and use’, this means when it comes to vehicle recovery we will always find the emergency air supply either behind the front bumper (fender) or behind the front grill. We only have two main types of air couplings, a 22mm - 1” male non-return ‘C’ coupling on the truck so we use female ‘C’ on our air lines you would use Glad Hands I think. The other style is a test point screw type non-return. We don’t like this type much as the nylon tip tends to seize in the brass housing. The same things we do have in common is we turn out in all weathers and spend time crawling around under trucks. 👍

[@watlertrent5640]

What a way to start out the week stay safe guys great video

[@McKaysWreckerservice]

Thanks a lot always appreciated

[@typashley5394]

Congratulations on the 20K subs. Another job well done by the A team . Don't let Jay keep wearing that jacket soaked in diesel , I had that happen to me and I ended up dermatitis on my back because of it. Cheers Chi thanks for the videos .Ty.

[@McKaysWreckerservice]

Ya ya it’s crazy never ever thought I would even get 10k and here it is people really like watching us it an awesome feeling thanks for being a part of this always appreciated

[@joshuamack342]

She did the job!!!! She went out there and got nasty and pulled that monster!!!

[@McKaysWreckerservice]

Not the heaviest thing she’s pulled but definitely up there

[@armandorodroguez1182]

It looks like they give you a lot of brake down Lane on this Hwy. That is good not that it makes your job any less dangerous. You still have to watch your 6 . Great Job Thanks for taking Us along. Is bird in training to do Recovery are he just Your assistant⛓️🔧🐬🐬🎬🙏👊

[@McKaysWreckerservice]

I’m sure when Byrd gets his license he will get into a heavy but untill then he rolls with me lol thanks for watching

[@VW5767]

Great driving at the off ramp!

[@McKaysWreckerservice]

Thanks a lot

[@michaelbickoff4876]

Great driving!!

[@McKaysWreckerservice]

Thank you and thanks for watching

[@bigc8300]

LUV HOW THEY DONT KNOW HOW GET OVER ONE LANE MAN YOU GOTTA TOUGH JOB

[@88keyes]

Good Evening.

[@openphoto]

Holy shit. I got a weird feeling something bad was going to happen working under that truck, close call.

[@McKaysWreckerservice]

Was a close call lol I just didn’t pay any attention to the drive shaft as the axel was coming down so I had to slide out the way thanks for watching

[@kennethwalker2806]

That was a great video.

[@brentsmith8506]

great job bro I bet that truck was heavy to haul keep u the good work and stay safe out there

[@McKaysWreckerservice]

Yea she sure was a little heavy but the raptor pulled thru thanks for watching

[@anonymousanonymous1266]

That thing is longer than cold weather.

[@McKaysWreckerservice]

Lol 😂

[@jerrydarnault1538]

Nice job you two be safe

[@McKaysWreckerservice]

Thanks a lot

[@stevenhorne5089]

I'm impressed.

[@McKaysWreckerservice]

Thanks a lot

[@KB-gs8zi]

OKS !! The only Question I Have is ::When you guys drop a drive shaft out ,,you Don't duck tape the u-joint bearing caps to keep them in place so that they Don't have to replace the joint do to lost bearing caps !!! Learnt the hard way when broke down in Detriot ,Mi .. and had to get towed to the shop !!! The shaft was taken out & tied to the deck plate but didn't have the caps secured to the joint and they fell off during transit !!! Had to replace both U-joints !!! Anyhows,,great video !!! Looked COLD to be lying on the ground,but ""THAT'S TRUCKING """ !!! KEEP IT SAFE !!!!

[@McKaysWreckerservice]

Yea when we remove it we tug in the cap and if it doesn’t come off we leave it on as the suction threw the ujoint usually holds them on unless it’s an old one but if they pull off we take them off and put them in the cab thanks for watching glad you enjoyed it

[@brucemorris6319]

Good job man.

[@keithsimpson4492]

nice rig

[@McKaysWreckerservice]

Thanks a lot

[@CasualCartier]

Backup cam on top and below would make things alot easier.

[@McKaysWreckerservice]

I actually have one but never use it got a new one and placed it low and it’s a dream that video will come soon thanks for watching

[@johnclamshellsp1969]

Great videos as always Malachi and Jay. Job after job, you two are pros on the scene everytime.

[@McKaysWreckerservice]

Thanks a lot we truly appreciate that

[@bgd73]

freightliners..I remember when the 444 came out, it did everything but keep a radiator. That was 30 years ago.

[@McKaysWreckerservice]

Yea they still carry those problems I wanna say I have only replaced radiators on FrieghtShakers

[@herbtoo8990]

And more snow comin your way ,get your rest !!lol

[@McKaysWreckerservice]

Was a bit of a long winter but always enjoy it thanks for watching

[@MrShujinJonmichal]

Hey Malachi, can we see you do the whole towing including on the way back to the shop please??

[@MaxZomboni]

Yeah, preferably with a back facing camera. I live watching the towing.

[@McKaysWreckerservice]

Yea I’ll have to get a few more of those rolling out I’m glad you like that angle thanks for watching always appreciated

[@shaunhill1358]

@@McKaysWreckerservice lol(

[@richardjellis9186]

Why do you want to see the after job stuff.? Is it so you can count how many times one says to the other... Jesus Christ, I thought I was a gonna when that half arsed sling snapped, or... You got lucky when that cable snapped and ripped the cab off the rotator.? Cos, I BET there's a LOT of conversations just like this, on the way home afterwards, when they've had the chance to think about some of the, let's just keep it clean, and say STUPID/UNSAFE, things they've just done, and somehow miraculously survived.! IT MUST END IN TEARS SOMETIME SOONER RATHER THAN LATER 🤪🤪🤪.

[@johnhoffman8203]

If the drop axle could stay up would you still need to disconnect the drive shaft?

[@johanreibestein4231]

nice driving

[@McKaysWreckerservice]

Thanks a lot

[@alkennedy1124]

Don’t do like I did on one of my tow jobs, drug and drive shaft for 60 miles, needless to say it cost me 175 dollars to get a new joint end replaced, thanks BigAl California.

[@passingthru69]

I know that driver. He was with them when I was... Now running a motor with now coolant is not smart... I wonder if he was holding the engine override button the whole time.. Looking at the plate and truck number, that is his trk. He will end up paying the tow bill plus the shipping of new radiator, plus labor

[@McKaysWreckerservice]

I think it’s so cool when I post videos and other people know the people in the video thanks a lot for commenting and watching always appreciated

[@Matt-W89]

man i would like to say thank you for the awesome video and the amazing shifting you are doing on the the what was epic :D

[@McKaysWreckerservice]

Thank you for watching always appreciate it and ofcourse for commenting enjoyed reading that comment thanks again

[@tiredoldmechanic1791]

Keep some cardboard on the truck. It helps when you have to crawl on dirty or cold surfaces. Throw it away when it gets dirty. Lestoil or ammonia work well on oil and diesel fuel.

[@McKaysWreckerservice]

We have a creepers bird just doesn’t like them as it makes places that much tighter for him under the truck thanks for watching

[@McKaysWreckerservice]

But cardboard would make it easier for him I’m sure

[@Brooklyn19831]

You broke the poor guys step!.... but its okay i wont tell no one i seen you do it ..... and watching you put it back on and say.. ohhh.... is like watching a kid sweeping dirt under the rug becuse he dont want to pick it up...lol Good job anyway keep up the good work and get jay a some oxy clean for his jacket it's looking a bit dirty!

[@McKaysWreckerservice]

I think it just snapped into place looked to be some bolts needed but I didn’t se any so when it clipped in I assumed it was good thanks for watching

[@paublusamericanus292]

this load acted like it was more than the driver was saying. I think he was thinking of the trailer load, not his gross. Because your tiny 450hp star 1140 was taxed to the limit towing this load. It almost never reached the two top gears out on the road. Of course that had to do with the cold, but if you had a hill to pull on a start ramp, your engine probably would have stayed in low low even after moving. This would be a big load for me, and your wide swinging, showed it was probably overlength without a special permit. It worked out because Malachi is one savvy guy. Jaybird, well, sorta. He will never be a Malachi, but good help, and that is what he needs.

[@TheBlake57]

I’ve towed that guy before!

[@stanpatterson5033]

So he's a habitual reoffender?

[@KB-gs8zi]

MR Smith !!! With the radiator blown like that ,,appears to be a leaking head gasket letting compression get into the water side and building too much pressure for the radiator cap to get rid of !!! Might be wrong, but had the related problem with a 2003 ProStar International with Cummins in it !! KEEP IT SAFE !!!

[@dandunning4409]

Great job as always Malachi. Nice driving buddy. I didn't see you put the pusher axle down on your truck? Did you put it down and how much air do you usally run in it? With that load I would have to believe you were required to have it down. I was puckered up when you told him to lower his tag axle with you under there. Anyway awesome driving you make the industry proud. Stay safe and warm.

[@McKaysWreckerservice]

Thank a lot truly glad to read such a nice comment means a lot that I can make this industry proud as that’s a goal set by most operators and in this industry competition is very tough on others so to hear that it’s not often so I truly appreciate that and as for the pusher it lowers once the brakes are released and I run about 40-50 pounds in it thanks again

[@Began2011]

What type of engine does you 1140 has under the hood?

[@my83roadster4me]

Will the bearing caps fall of the universal joint without them being taped?

[@McKaysWreckerservice]

No we pull on them and if they don’t come off then we leave them never had a problem yet

[@kevinclark8268]

👍👍👍👍👍!

[@jackcaldwell485]

That truck is making the rotators rear tire hate life lmfao especially the righ rear outside ones , besafe man we are getting close to spring and it will be short shorts and long legs from women weather soon! That snd the rotators weight made that olé cummin grunt too , you all run 600s or 565hps?

[@McKaysWreckerservice]

Yes it was and these where old tires the truck has new tires on it now but was at the end of life for those puppy’s and spring definitely coming mean winch outs will be a lot of thanks for watching

[@tophauler8626]

where did the driver sit

[@campingeast]

pov drive yeahhhhh!

[@STACHUrka]

Question, what mean green light, any special function or standard warning light?

[@McKaysWreckerservice]

Yea I guess from what most police say it means a command vehicle but I can’t have them going when I’m towing but if I’m scene working they can be on

[@briancasey4917]

Did not look like the under reach was chained to the axle?

[@lngsht8168]

33:36 that turns separates the men from the boys!! jaybird was shittin his pants hahaha

[@deereman2607]

Who put all of the running lights on the rotator? What brand are they?

[@McKaysWreckerservice]

I did and we ordered them from world wide truck equipment maximum is the brand

[@topnotchtx]

How much horsepower does your truck have to be able to tow a load that big?

[@coppydoubleloppkliem4146]

Did Sergie breakdown again?

[@VW5767]

Why is he still running that truck if he blew the radiator? Great job guys!!

[@lukuscarter3563]

I think as long as he don’t stop as cold as it was he was keeping cool.

[@SlidTossedPissed]

The last time... I took on a load that large... it was either Mcds... or a Bad Chinese Place. Felt like I weighed 150k. Came home all wobbily. I was fartin like crazy. When I finally dropped the Bears off at the Superbowl..I too felt a LOT better. I am glad.. no one arrested me or tracked down the new level of in-hunanity.. that I unleashed on that bathroom... in order to release a load of that magnitude. It was downright disgusting. I was soo gassy. Stomach was soo distended. And the burping... I couldnt believe the Lo Mein gave me gas like that. It was downright disgusting. Deep Belching. Like it came from my Toes... Worst part... When I ate the stuff.. I popped the ass out in my pants and I couldnt get the damn button to close. Felt so large, I needed to be brought home and ratchet strapped / chained down on a Flatbed. Be careful man!

[@davidknows3320]

Isn't there a tap point for you right off of the air compressor under the hood?

[@McKaysWreckerservice]

Yea some have them some don’t no biggie air tank works just as good I like when it has the port off the compressor just. Quick connect and go thanks for watching

[@keithnichols7926]

These guys may be the slowest in the business. Disabling the drive shaft must have taken 30 minutes.

[@nitrofish1974]

Steam pressure washing jackets work for me

[@salvadorluzdesouza8962]

👏👏👏👏

[@lngsht8168]

how heavy do you run before dropping your 3rd axle?

[@9carcottrell246]

Over 100,000

[@McKaysWreckerservice]

Mine drops the second I put it in gear if I don’t have it down I’m over weight unfortunately for me I learned that the Hard way after getting a 2400$ fine for being over 4-5k on my drives

[@lngsht8168]

@@McKaysWreckerservice well thats unfortunate, you'd think they give the tow operator a break... unbelievable

[@chicknchili]

What did u do with the driver?

[@McKaysWreckerservice]

Let him ride in his truck to the petro

[@grgl140]

I missed what happened to the driver, was he riding in his rig? I thought that was illegal?

[@mikecrockett3669]

This is frick’in great! I’ve decided I need a rotator as my social distancing vehicle. Just boom in and of Starbucks. Look great hanging out if my carport, too. Thanks for video...subscribed!

[@Dylan-kw4ol]

how long have u had ur 1140 rotator for!?

[@McKaysWreckerservice]

3-4 years

[@williamstarklauf6085]

Use dawn 4x power in washing machine jacket clean guaranteed

[@cumminsdieselamen]

Where dose the driver sit? In his truck while being Towed?

[@wisconsinhunter3108]

Very much against the law

[@McKaysWreckerservice]

It’s not against the law to pull him in his truck to the closest safest exit it’s illegal to leave him on the side of the highway so most police officers won’t bat an eyelash especially being so cold out and at the first exit wasn’t safe as in no warm place to be at and we traveled a total of 6 miles maybe

[@chakagillis]

Gotta call a real truck to do the job. Not that Freightliner garbage

[@McKaysWreckerservice]

And that’s exactly what showed up a real truck lol thanks for watching.

[@dcastro5400]

Hey Malachi & Jay, is your Pete a custom built rotator? It’s really unique and a great looking truck

[@9carcottrell246]

Yes it’s custom

[@McKaysWreckerservice]

We did all the lights on the truck but the side puller is an option miller puts on the rotator thanks for watching

[@ktalltx8538]

whys he running that truck with it low on coolant?

[@McKaysWreckerservice]

He attempted to build air

[@Timberbeartrail]

Who built your rotator

[@robertbradford2734]

605 Cummins 18 speed in that thing?

[@McKaysWreckerservice]

Yes sir you got it

[@TheRick2130]

i think you guys left his hazard warning kit

[@dorothyford6616]

No cones?😯

[@jaystermac9870]

Why don't you guys just pull the axles? I know it can be messy but much easier. Also I wrap duct tape around u joints so caps and needle bearings stay in place only takes a minute if I have to drop a drive shaft. That was definitely one large car going down the highway!! Impressive wrecker for sure I got a woodie just watching video!

[@cw3339]

you left the remote stuck on the back of the truck

[@McKaysWreckerservice]

Lol I do that all the time thank god for those strong magnets 🧲

[@lamborghini5510]

Did you leave the guy in the truck your towibg

[@passingthru69]

Yeah was kinda wondering that also Most states that is illegal.. But maybe the driver needed a bath and smelled too. Who knows

[@McKaysWreckerservice]

Yes I did... as I was only going to the petro rite around the corner and I can’t leave the guy on the highway in the freezing cold and I only have two seats so he sat in his sleeper as if he was a team driver and I took over from there lol thanks for watching

[@jbarstrailerfab]

What did you do with the driver?!

[@MC-us5jq]

He must have been in his sleeper during the tow. I wonder if that is even legal?

[@stanpatterson5033]

As far as I know, it's not legal, but they don't have much space in the cab of the rotator. I guess in the worst case scenario, the driver could jump behind the wheel and try to steer, if it jumped off the hook. Chances of that are pretty slim. Also slim are the chances of being busted for having the driver back there in the truck. Unless the guy was bug-eyed and staring out the side window at the world going by while under tow. They weren't going too awfully far, else he would have had to squeeze into the Peterbilt with the boys to keep warm. When I was younger I worked as a mover. Any trucks that didn't have seating for three, we'd build a box to sit between the 2 air seats. Most guys just stole a milk crate and found an old cushion, but if you were anywhere half-ass handy, you built one a nice box with a padded top and a flip-lid on hinges, so you could store stuff in the box, so it was pretty useful. On the trucks that didn't have a 3rd seat, the lowest helper on the totem pole had the option of sitting on the floor behind the gearshift, or riding in the trailer (or straight truck body). We just didn't make a big deal about it, because it wasn't legal.

[@McKaysWreckerservice]

The police would be more upset with me if I where to leave the guy on the highway instead of letting him ride in his truck the 2.2 miles he was towed back to the petro and while he is in his sleeper it’s no different than being a team driver while one sleeps the other drives and we have done that before make a seat for the bird to sit on while we tow but never very far if it goes more than 10 I get them an Uber and put it on there bill thanks again guys for watching always appreciate and for sharing

[@alkennedy1124]

What the heck , the other black driver tried to turn around on that little country road , he dose not even need to be on the same roads as me , so disoriented didn’t even know what he was hauling basically, those kinda drivers are just out on the roads be disruptive to the American 🇺🇸 ways, This vlog was kool because you allowed to comment thank you , merry Christmas happy new year 🎆🎈🎊 praise Jesus grace Christ amen 🙏, air lines for sure, good job , you don’t that truck sounds terrible, you should not of said yes go ahead and air it up , you might be paying for that motor saying stupid stuff like that , no no no no , you are there to do a tow job, not a mechanic, the truck is in need of a tow for some season or another, and you are the tower rite, your truck is more then capable of air up that truck , besides when you pull the plug to hook up your air hose, all the air is goin to leave anyway, I’ve done towing my whole life, 50 35 ton under reach, 1500, tows I one year, 1990 s , kool thanks BigAl California.

[@kctyphoon]

I absolutely hate working on highways.. HATE it.. thousands of pounds of metal hurling towards you, piloted by people more worried about why their phone just beeped.

[@pamchippendale7593]

What a huge load, but the truck and you guys were great as always. I wondered what you'd done with the driver as well? Birmingham UK

[@McKaysWreckerservice]

Thanks a lot and we let the driver ride in his truck as we where only going to exits away quick tow and we can’t leave him on the highway in the cold gotta take care of the customer

[@tbaxter08700]

How come you don't put cones out? I'm just going off other videos who always put cones out. I guess each to their own.

[@McKaysWreckerservice]

I usually do place cones but it was a nice large area so I opted out on the cones thanks for watching always appreciated

[@tbaxter08700]

@@McKaysWreckerservice thanks for the reply 👍

[@zman319]

If my math is right that's like 200k lb rollin down the road thats awing

[@richardjellis9186]

Stood with hands in pockets. Glad to see his heads in the game eh.? Useless, simple, dangerous etc etc etc.