Rotel A11 Tribute: 4 More Speakers Tested! - Monitor Audio, Bowers & Wilkins, and Wharfedale

You all asked for it and so we have come to deliver, Daniel is back with four more speaking pairings for the Rotel A11 Tribute by special request. Today we will be looking at pairing this amplifier up with the Bowers and Wilkins 606, the Monitor Audio Silver 100 and the Wharfedale Detons and Lintons. The results are quite surprising.
For more information on the products shown in this video use the following links.
Rotel A11 Tribute Integrated Amplifier:
www.lenc.com.au/products/rote...
Bowers and Wilkins 606 S2:
www.lenc.com.au/products/bowe...
Monitor Audio Silver 100:
www.lenc.com.au/products/moni...
Wharfedale Denton:
www.lenc.com.au/products/whar...
Wharfedale Linton:
www.lenc.com.au/products/whar...
The A11 Tribute is a Class AB 50W Integrated Amplifier developed in cooperation with the audio engineering legend Ken Ishiwata as a Tribute to his legacy. Upgraded components and meticulous tuning of all critical circuits deliver a richer, expressive, and true-to-life experience from the Bluetooth, RCA and MovingMagnetPhono Stage inputs.
The A11 Tribute is a Class AB 50W (8 ohms) Integrated Amplifier developed in cooperation with the audio engineering legend Ken Ishiwata as a Tribute to his legacy spanning over 40 years in the industry.
The collaboration between Ken and Rotel’s own engineering design teams delivered on the promise of an even higher level of performance of the extremely successful and popular award-winning A11. Upgraded components and meticulous tuning of all critical circuits deliver a richer, more expressive, and true-to-life experience from all of the support source inputs including apt-X and AAC wireless Bluetooth, array of 4 RCA analog inputs and a Moving Magnet Phono Stage for vinyl fans.
Specially selected improved components were chosen to offer higher performance throughout the signal path. In the amplifier stage, all 10 capacitors and two resistors in the signal path were changed.
For the pre-amp, six capacitors were upgraded, representing over 50% of the components in the signal path. All six capacitors in the volume stage were also upgraded.
Custom damping materials were added to the A11’s mechanical chassis to reduce ringing and further isolate/insulate and dampen any vibrations within the product.
The front panel graphic display and IR remote ensure effortless control of the audio driven by a Rotel in-house manufactured oversized toroidal transformer. The resulting acoustic performance speaks for itself under all loading conditions with even the most difficult speaker loads.
-
Bowers and Wilkins 606 S2 Anniversary Edition
The 606 S2 Anniversary Edition is the seventh generation of our iconic 600 Series standmount speaker. The ideal combination of size and power, it blends its advanced Continuum™ cone with an improved crossover for even more insight in your music. 25 years on, it remains the standard for attainable performance loudspeakers.
-
Monitor Audio Silver 100
The Silver 100 is a serious audiophile speaker capable of producing remarkable resolution, from the most intricate musical scores to the loudest rock concert, with superlative ease. High output and effortless dynamics make the Silver 100 an ideal choice for medium to large rooms in two-channel stereo or multi-channel application.
-
Wharfedale Denton 85th Anniversary
Denton 85th Anniversary is a two-way speaker in the classic bookshelf tradition, beautifully hand veneered in Mahogany by Wharfedale cabinet makers with an inset front baffle and traditional Tungsten cloth grille. Underneath the traditional exterior, however, the Denton 85th Anniversary is bang up to date and utilises a mixture of traditional and advanced technology. The bass unit features Wharfedale’s innovative woven Kevlar cone mounted on a rigid die-cast chassis, this combination delivering a rich, detailed bass/midrange output with superb dynamic performance. High frequencies are handled by a woven textile soft dome treble unit with high flux ferrite magnet, engineered for smooth, detailed HF extension. These drive units are combined by a highly researched crossover that is near inaudible to the listener, resulting in a coherent, seamless musical output that is both thrilling and natural in its rendition of any source material.
-
Wharfedale Linton 85th Anniversary
To celebrate its history, Wharfedale has established the Heritage Series recreations of famous models from its past, entirely re-engineered using contemporary techniques and materials. The latest loudspeaker to join this collection is the Linton.
-
For all things Hi-Fi check out our website:
www.lenc.com.au

[@raymoore8435]

Love the format immensely. Finally a more practical approach than what I see on other channels!

[@davidline2454]

Thank you, I think you’ve just confirmed my decision for the bones of my next hifi 👏

[@thierrybernot9369]

Very interesting and honnest review. Thank you.

[@living_entertainment]

Glad it was helpful!

[@devenderkumarkaushik5994]

I appreciate your sharp observation capabilities, I am too a big fan of silver 100 and I know why I am after watching your review

[@kibreddy]

I learned so must watching your videos. Thank you sir.

[@living_entertainment]

We are glad you have found this information helpful!

[@aaronpimanfo4854]

A11 Tribute and Elipson Prestige Facet 8B.... Magic!

[@romerlaszlo]

I’m using the Rotel a11 with a pair of Wharfdale Denton’s 85th A. and am deeply impressed with the audio quality. Superb soundstage and realistic sound delivery. I’m using Tone bypass and haven’t noticed any overt treble. They are very new and I believe that bass becomes more pronounced as the speakers get some ‘exercise’.

[@living_entertainment]

We are really glad to hear you are enjoing the combination!

[@aaronrojas5399]

Hi, I do have a question. I, like yourself have the A11 and I am considering getting these wharfdale Dentons. So you really like your combo?

[@romerlaszlo]

@@aaronrojas5399 Yes, very much. I enjoy them every day.

[@myfreakyvalentine]

I have this amp and was running it on Acoustic Energy AE300 bookshelf speakers and it sounded fine but really needed compensating with the tone controls (for me), but I changed over to some Q Acoustic 3050i floor standers and oh boy, what a difference! Massive improvement in midrange and clarity even with tone bypassed, just beautiful. Definitely recommend that combo.

[@DanielMarch]

Love the lintons

[@MitchNorris]

Great, detailed, no bullshit review, thank you! I am curious tho, you said the Rotel sounds great on the Linton's, but it still doesn't bring out their best qualities. So could you do an amp comparison for the Lintons? A few amps and how they perform with these speakers?

[@18echo]

My MA silvers 100 don’t disappoint 💪🏼💪🏼💪🏼💪🏼💪🏼

[@dBtje1980]

Really like the combination of my old Rotel amp with my kef r300 and hope to hear them with the A11 tribute soon. Not sure if it has enough power. Otherwise I’ll might chose the A12.

[@ynnektrub1]

I am just breaking in my new A11 Tribute and B&W 607s (not l606s), which I chose because I got them for a SCREAMING deal! Not broken in yet, but I'm very pleased. I hope too upgrade speakers one day, but from what I'm hearing now, I'm not in as much of a hurry as I thought I'd be.

[@living_entertainment]

That would be a great little nearfield setup!

[@shaunyweavey2470]

After many try outs, the following go really well with the tribute .. Quad 77 11 old but gold . B@W 607 S2 Acoustic Energy EVO 1 Fyne Audio f301 Monitor Audio silver 100 XTZ 99.25 Not so good .. Triangle br02 br03 Quad s Series Cambridge Audio sx JBL stage

[@chuckpardy8530]

Thank you very much for this review! These pairing videos are fantastic! I’m the owner of an A11 Tribute and based solely on this review, Wharfedale Lintons. The smile on your face when describing the sound is what sold me. If possible, could you recommend a phone preamp as an upgrade to the A11’s built in? Thanks!

[@bigmacfullerton7870]

Just bought the A11 tribute on sale at Crutchfield for $650 and I must say this review has me very excited to hear what this thing can do in my home with my speakers. If this thing is a steal at $800 then $650 was a no brainer!

[@lukaszczernal]

2 cents regarding Dentons. I recommend Atoll In100 amp. Great pairing.

[@kyleturner7627]

Love my lintons, nice warm bath after a long day at work type sound.

[@living_entertainment]

We find a lot of audio professionals gravitating towards the Lintons and other speakers with a mid-range bump for pleasure listening in order to get away from the detailed sound of audio engineering and mixing.

[@andrehb]

what amp are you pairing them with?

[@MatijaTurk4]

I'm using Indiana Line bookshelf speakers with A11 Tribute and sounds tasty!!

[@living_entertainment]

We always love hearing about new combos that work well, thanks for the tip!

[@RienV1980]

Hope you do the same with a couple of floorstanders and this amp. I like standmounters, but you have to keep in mind that you have to pay for the stands the mount them on. Sometimes floorstanders make more sense in terms of bang for your bucks.

[@6643bear]

Thanks for interesting video, I now going to go for 606 as now for sell under £400 , I also have complete Rotel a11 set up, but I do like the silver 100 v7 also . Regards mark

[@living_entertainment]

Have fun!

[@6643bear]

Hi thanks for your reply , I did go for the 606 and was only £349 , at that price point you can’t really in not getting them . Sounds pretty good . Regards mark

[@cremersalex]

You are absolutely right about the Denton 85th. Being familiar with the Lintons, I too was very surprised when I first got the Dentons. I did not expect them to have this forward treble. However, the Dentons have a bi-wiring option. How did you connect them? I found out that if you only use a single wire and connect that to the LF connectors of the Dentons, the treble becomes more civilized. Wharfedale recommends a cross connection (black into LF and red into HF) but then the treble tends to overwhelm.

[@thomasward00]

I have the Denton 80th, seems Wharfedale went brighter with the 85th.

[@jc6993]

I'm trying to follow what you said. What do you mean "single wire to the LF". Is that in bi-wiring or are you referring to the jumper cables. Where does the red + and black -go?

[@cremersalex]

​@@jc6993 Yes, leave the brass plates in place or use jumper cables. 1) Normal single wire: red goes into 'LF+', black goes into 'LF-'. 2) Single wire 'cross' connection: black goes into 'LF-', red goes into 'HF+'. However, for the most balanced sound, bi-wiring is the way to go. When bi-wiring, remove jumper cables. See photo for how to bi-wire: fwd.nl/app/uploads/bi-amping.jpg

[@kamilkonarczak9121]

Hi. Thank you for review. If possible you should really try this one : STX MX-140

[@living_entertainment]

Glad you enjoyed the video! We are not a STX dealer so unfortunately its not a paiting we can currently try.

[@TheSilentWatcher]

Hi there. Thanka for the informative review! I see that you have put together the three systems that I am trying to decide between - Rotel A11 Tribute, AudioLab 6000A and Marantz PM6007 together with their matching CD players (in this particular order of preference without being able to hear them in real life). I suppose that you have an personal preference after testing them side by side. Could you please share with us your opinion and why would you chose one after the other? Thank you very much in advance - that would be very helpful!

[@living_entertainment]

A lot of it will come down to the speakers you are pairing with them in the end. Personally, I prefer the Audiolab combo, in my experience its the easiest to pair with speakers and it has the best balance between ease and engagement. The Tribute pack is a fantastic budget system that sounds very energetic and exciting, the Marantz is the most laid back in its presentation. I don't think one system is better than the either in most regards, they are all offering very different musical presentations though tonally.

[@TheSilentWatcher]

@@living_entertainment Thank you so much for your reply! My speakers are Elac DFR 52 Reference. They sound to me quite neutral and I am a little worried that the AudioLab might sound a bit too clinical with them. Would you say that the Tribute sounds warmer?

[@living_entertainment]

@@TheSilentWatcher I understand the concern now. The Marantz is easy the warmest of the 3 BUT not being an Elac dealer they aren't a brand I have had the opportunity to try with any of these amps so I honestly have no idea how they would synergize.

[@TheSilentWatcher]

@@living_entertainment thank you so much! That was really helpful 🙏😊

[@wildebassman]

To my ears the Marantz is the more energetic amp, tried both and I find the Rotel more laid back with a smaller soundstage, tried on diferent pairs of speakers.

[@aleromero1981]

Great combinations...what about Rotel a11 with: Dalis, QAcoustics, Fyne Audio and Focal?

[@gokhanersan8561]

Just compared driving my Dynaudio Emit10s with Rotel a11 Tribute and Hegel H190. Hegel H190 made jazz sound like it came from 10K speakers. Unbelievable. Pop and rock sounded anemic on Hegel. No midrange bass. That little Rotel absolutely killed it, when playing pop and rock. So, tried the gigantic Rotel 1592. That little tribute slayed it once more. So long expensive amps. Bye.

[@ranig2268]

Thx for the great and detailed review! I have a question. I just bought an A11 Tribute amp after hearing it in an audio store and being wowed by the sound it produced when paired with the speakers I am planning to get (but haven't bought yet) - B&W 607 S2 for inside zone and B&W AM1 for outside zone. While I'm waiting to get the new speakers, I tried pairing the A11 at home with some vintage B&W DM110s that I have but was disappointed that the sound was a bit flat and lacked dynamics and in fact I preferred the sound from my vintage 1st gen Arcam Alpha amp paired with these old speakers. I know these old speakers are not going to be anywhere near as good as the new ones I'm getting but I was hoping the A11 might be able to bring them to life. Is it just that old speaker technology goes better with old amp technology and I'm still going to be really impressed with the A11 once I get my new speakers?

[@living_entertainment]

That's system synergy in action, I can't speak for the components of the older B&W speakers but I imagine they would interact quite differently to more modern models.

[@ranig2268]

@@living_entertainment Thanks. I'm looking forward to hearing the A11 again with the B&W AM1s when I have my new deck outside and hopefully I'll get a similar "exciting/engaging" sound to the one you experienced when pairing it with the 607s inside! I'm also glad I didn't get rid of my old Arcam amp for this other setup - it's amazing how well-made equipment can last for so many years!

[@nc7022]

Great review! What’s the best amplifier for Elysian 4?

[@akamvisis]

Thank you for the review. I am thinking to get the A14MKII for my Lintons. what's your opnion ?

[@aaronrojas5399]

Hi, my question is this: Does the impedence being 4ohms on the Dentins cause any issues being ran by the A11 or even any Rotel amp

[@6643bear]

Hib, great interesting video, I recently bought 606s2 anniversary paired with A11 tribune , although they sound petty good l am sorry to say that my B&w 602 s3 has better sounding bass then 606, I only got these as reduced the price from £599 to £349. That’s why I bought them , however was looking at monitor audio silver 100 7g, also was looking focal chorale 806. As you know that A11 has 2 speakers output so I listen to 602 and then 606 .regards mark

[@6643bear]

Hi again it be interesting to hear a11 with ELAC ubr62, it’s also interesting that B&w have upgraded the 606s2 to the s3 model . Regards mark

[@user-el2zj3pw5r]

More exciting more lively sounding Silver100 or 606 s2 Thanks!

[@living_entertainment]

Definitely, the 606 S2 though the Silver isn't far behind and has a fuller sound.

[@user-el2zj3pw5r]

@@living_entertainment new silver 100 7g came out recently, wondering what they like

[@living_entertainment]

@@user-el2zj3pw5r They dont come out in Australia until November but we are incredibly excited to cover them once they do!

[@user-el2zj3pw5r]

@@living_entertainment nice, by any chance you ever had chance to listen to elipson planet L speakers? Of so what they like Thanks!

[@living_entertainment]

@@user-el2zj3pw5r Elipson aren't a brand so unfortunately we have no had a chance to hear them.

[@marat936]

Hi, thanks for the great review. Thinking about buying the Lintons but cannot decide on amplifier, Rotel A11 Tribute or Audiolab 6000a play? Does the difference in cost justify the difference in sound?

[@Nath-rg2qd]

In the same boat. Did you end up making a decision?

[@marat936]

@@Nath-rg2qd Found a good deal so went for the Audiolab, they told me it's made in the same factory so components should be 'more' compatible even though main reason was the streamer between these two. I do not consider myself audiophile and I think I wouldn't hear the difference here this just seemed like more practical and sustainable solution. Really satisfied with the sound of wharfedales not being to agressive, clicky.... really comfy

[@jasonmccarty9]

I like punch as well, that doesn’t stay around too long. What else have you reviewed that’s had this like the BW? I used to have the 685 S2 and was sort of bored with those. At higher volumes they did have some decent punch. I have the Q Acoustics 3030i right now and it’s bass is boomier. I want a quicker punch. My Sonos ones in a different room do a great job of this actually. What other affordable or semi affordable hifi speakers you’ve reviewed have nice bass punch besides BW? Thanks!

[@living_entertainment]

If you are looking for punchy bass I don't think you can go past Monitor Audio's Bronze and Silver series, especially 200 series floorstanders which are very fast due to their smaller drivers.

[@cschoi100]

How does it pair with B&w 706 s2? Will it give you the same dynamic and punchy bass like 606 s2? Any other amplifier do you recommend for 706 s2?

[@living_entertainment]

The 706S2 works okay with the A11 Tribute but you get far better performance from the Rotel A14 MKII.

[@mattf20c27]

I'm doing this backwards, but I have Silver 2's (100's), thinking if picking up the a11 tribute to power them? Good choice? Or another amp?

[@joechoes87]

Thank's for the vidéo! So for the Linton Rotel A11 (12?) ou Audiolab 6000A ? Which is the best?

[@living_entertainment]

Oh that's tough, but Id say the Audiolab 6000A.

[@ayewhite333]

Wondering how the 6000A Play would pair with the Lintons - can you do that amp next?? Pretty please

[@living_entertainment]

It's not something we will do a video on because it's already an incredibly popular pairing. They sound excellent together, no if or buts about it.

[@ayewhite333]

@@living_entertainment fair enough! thanks

[@revivehificanada]

Would the a11 be an upgrade in sound compared to my Marantz sr4021 stereo receiver when using with monitor audio silver 100 7g? Thanks

[@bradleydurbin6784]

For 800.00 this amplifier sounds like a winner. No pun intended. I have a Rotel separate power and preamplifier from 1994. I wonder what PSB speakers would sound like with this amp. And Polk audio

[@living_entertainment]

That's a good question. We arent a PSB or Polk dealer so we aren't able to test to find out but if you happen to get the opportunity be sure to let us know of your experience!

[@bradleydurbin6784]

I have a pair of psb xt1 tower speakers. They sound good hooked up to my old Rotel seperrates. They actually sound similar to the Bowers and Wilkins. Except the Bowers and Wilkins are slightly better in the treble. I've been hearing about these french speakers called triangle. Would like to hear them someday. No high end dealerships in Tucson anymore. Except best buy. That carries elac.

[@TheMack]

Nice review, but I'm missing the descriptions of how it sounds with different music they were tested with. If I listen to Metallica and Cradle Of Filth, are the Lintons still lush and smooth? Maybe the electric guitars sounds like mush, buried in a V-shaped EQ-character. Is the speakers/amp a good paring to metal, pop, techno, or 70's disco? And which songs did you listen to, anything I can use as a reference would be nice, an album, song or artist that I know or at least have heard previously. I don't listen to hardware, I listen to music :)

[@RennieAsh]

But yet your statements make it seem like you really do listen to hardware. You can listen to music on just about anything, and when you really enjoy it, it doesn't matter if it's on a less than ideal audio system :)

[@TheMack]

@@RennieAsh Agreed. It's the hardware producing the music and how it sounds, so it can't be overlooked of course. Just about this time last year I listened to a few speakers at a HiFi dealer, playing the music I listen to. There were a couple of speakers more tailored to home cinema and it wasn't really to my taste and the music I listen to. I ended up buying a couple of JBL 3600 floorstanders after having listened to the bookshelf variant. The bookshelf speakers were made for my type of music I can tell ya. So I said "If I want more of that, will the floorstanders deliver?" They sure did! Never looking back now... 😀

[@pierrebruwer4301]

Hey Bro , how would that amp sound with the 80th anniversary Dentons , just wondering ? Peace Pierre

[@michaelgregory25]

Great review! Can you recommend an amp that would be a nice, laid back match for the Denton 85s?

[@living_entertainment]

The Audiolab 6000a and the Leak Stereo 130 are probably the best 2 options in our experience.

[@minhtamtrinh1116]

@@living_entertainment how about roksan atessa?

[@living_entertainment]

@@minhtamtrinh1116 They sound alright together but its not something we would rave about.

[@lucianohighC]

Nice review, Thanks I am pretty sure that I would like to have the Wharfedale Linton... and would like to know what do you think about the sounds different or specifications between pairing them with Audiolab 6000, Leak and Rotel 11 tribute (CD + AMP) Which system you would prefer and why? Which setting would be more suitable for Classical, Jazz and which one more for Rock, R&B, folk/ country or which one is most all rounded?? And the balance between analytical detail sounds VS warm, rich, smooth flavor...etc??

[@lucianohighC]

Yea... I think those 3 would be main choice, unless other combinations that you've tried and given a good twist that you wanna mention/ recommend... (Marantz 6006/ 6007, Cambridge Audio AXR100, Yamaha, Denon...etc??)

[@living_entertainment]

The Wharfedale Lintons sound largely the same on most amplifiers to our ears, the biggest differences come in soundstage detail and bass control, and in that regard I put the Audiolab 6000A in the lead. The Leak Stereo 130 has a very similar wide soundstage to the Audiolab but the bass isnt quite as punchy, though it perhaps a little more body. The Rotel A11 doesnt have the Soundstage of the Leak or Audiolab but it does have a punchier bass than the Leak. These differences are very subtle however and I think you would need to spend a fair amount of time with all of these combinations to be able to pick them. Honestly when pairing these specific 3 amplifiers together with the Lintons you can probably just pick the amplifier you like the look of most and you will be gold. When it comes to Marantz with the Lintons I find that the sound can be perhaps a little dull as your feeding a warmer sounding signal from the Marantz into a warm speaker. We do not have access to Cambridge, Yamaha or Denon so unfortunately we cant make an informed decision here. We will however be trying the new Roksan Attessa range with the speakers when they release in September, pricepoint wise this system are very close to parity with the Audiolab.

[@lucianohighC]

Thank you very much for your reply, very clear, details and helpful... I think I have a preference now😊 One more question🙏🙏, regarding the source, would you say pairing the same brand and model is the best??? eg, I am having the Audiolab 6000A, but am not the biggest fan of their slipping in style CD... What would you suggest/ think about that??? Would Rotel 11 CD sounds as good or similar??? Or how do you think about the Audiolab 6000 CD slipping in design, in terms of "demaging" CD and user friendly...etc???

[@living_entertainment]

@@lucianohighC The Rotel CD11 Tribute is a great little CD Player. You can use it as a transport like the 6000CDT or you can use the RCA outputs with the built in DAC which will give you a different sound as the Rotel has its own personality. Either system will give you a great experience.

[@chuckpardy8530]

How does the Leak 130 compare to the Rotel A11 Tribute, when paired with the Lintons? Thanks!

[@living_entertainment]

These videos are a number of years old now and unfortunately we are no longer in the position to do a side by side comparison. Your best bet would be to test them at your nearest dealer.

[@xsamitt]

Lintons for the win!!!

[@living_entertainment]

Never cease to impress.

[@louisdefunes8952]

Hey Daniel; nice review. i just bought a pair of Dali Oberon 5 speakers, connected with a vintage,fully recapped/restored Sansui AU-505(1978!) and it sounds amazing; clear and warm. Looking for something new(bluetooth,remote control ect), i think of the Iotavx SA-PA-3 combo,or Emotiva(TA-100 and..?.) combo. Or this Rotel,or Rega Brio,Audiolab... so many choices. Not more than about €1000,- Okay depends on somebody's taste and the room where the audio is located. Music style; jazz/rock/fusion,blues,rock,reggae,soul,funk,grunge,South American.

[@living_entertainment]

That's a bit list of products you have listed there! If you are looking at pairing the new amp with the Dali as well (bi-wiring I assume?) I feel like the Audiolab is the safest bet. I can't speak for the other brands but I have never had synergy issues with the 6000A.

[@louisdefunes8952]

@@living_entertainment Haha, yeah sorry man Ofcourse there is difference in equipment(quality), but it’s all about how a track is mixed in the studio or live track. That’s what i believe😜

[@living_entertainment]

@@louisdefunes8952 A good recording will always sound better on an average system than a bad recording will sound on a high end one, recording is everything!

[@dBtje1980]

A Rotel A12 mk2 maybe?

[@user-fi5bh7cp9e]

Hi, is it possible to set display with black background and white/clear letters/numbers. Thanks

[@stwhy]

Would the A11 pair well with the Wharfedale evo 4.3?

[@jmcendra]

Hi, greetings from Spain!!! I've heard the Rotel A11, does not have enough power sometimes, I have a tower speakers, PSB Image T6. Do you think the amplifier will work decently with this speakers? frequency response: 32-23,000 Hz (±3dB) sensitivity: 91 dB. impedance: 6 ohms. recommended power: 20-200 watts. Thanks a lot for your help.

[@living_entertainment]

Based on the specs of the speakers they can run on 20W so the A11 Tribute should be more than adequate!

[@marktaylor1233]

Re the Wharefedale Lintons in the video - Are these the Walnut or the Mahogany colour?

[@laakmusicstore]

Estoy pensando en comprar un a6000 pero sigo con la duda de qué parlantes comprar Silver 100 o evo 4.2 , alguna recomendación?

[@eduardomascayano6228]

Hola, tuve el Audiolab 6000a + MA silver 100 7G y suena excelente la combinación. Bajos profundos y controlados y altos detallados. Lo unico q no me gustó es q al 6000a se queda corto en potencia. Tengo q subir mucho el volumen para disfrutar a un volumen bueno y mi sala es mediana.

[@borlach321]

Does that amp have enough Current to drive The B&W and Monitor Audio's? The specs seem to indicate the amp could be a little lacking in power.

[@Academicidiot]

The Hifi news review found them to have 75w into 8ohm and 105w into 4ohms. So not the doubling you would hope with hard to drive speakers but more power than quoted

[@callumcopley6780]

Hey 👋 I've just got the rotel tribute cd player and amplifier. I have eltax symphony 6.2 floorstanders which I've owned for years they are 4 to 8 ommes. 150 watts. sinus power 80 watts frequency response 35-22-000 will.they be suitable to use or should I change to different speaker's more suitable thanks Callum .don't want to damage anything and want best o can get out the system .any advice would be much appreciated Callum

[@living_entertainment]

Hard to know for sure, throw them on and see how they sound! I don't think you have to worry about blowing them.

[@lucianohighC]

Would B&W 603 S2 AE go along with this Rotel A11 tribute?? Would the amp have enough power to brings out, especially the bass of a floor standing? Or otherwise, what would you recommend to go along with the B&W 603 S2???

[@living_entertainment]

We would have to find the time to test and really find out, based on our experience with the A14 MKII though we didn't find that the 603 S2 Floorstanders had much more bass than the 606 S2 when it comes to pairings with new Rotels. We don't think it's so much to do with power as it is with system synergy.

[@lucianohighC]

Thank you for your info. So I think in terms of rich bass and mid-range, Wharfedale would be the brand to go for in general compare to the new B&W??? What do you think about the performances different between Linton and evo 4.4, pairing with the amp Audiolab 6000A in particular??? Mainly for classical music, (orchestral, chamber, strings, choir, Opera), movie soundtracka alongside some Jazz/ Audiophile Vocal

[@living_entertainment]

@@lucianohighC We love the Lintons with the Audiolab 6000A, though the Evo 4.4 prefer more power and we would recommend the Audiolab 8300 series for them. The Evo 4.24.3 pair up much nicer with the 6000A with a much more spacious sound than the Lintons which sound more robust and full.

[@eduardoquirino8131]

what souce did you use? Rotel cd player?

[@markdrew1603]

Can you do one of these videos for the Audiolab 6000A please?

[@living_entertainment]

The Audiolab 6000A is definitely something I would like to return to at some point. I will have to run it by the man in charge. ;)

[@Richbroth]

@@living_entertainment yes please

[@VinodKumar-gx7wj]

Could you please do a similar test with the Audiolab 6000A ?

[@living_entertainment]

The 6000A is getting a little old now but I can list some of my personal favorites with it for you now. :) Wharfedale Diamond 12 range Wharfedale Evo 4.2 Wharfedale Denton/Linton KEF LS50WII

[@mshiladitya86]

Hello, nice video...wanted to know...what do you think of a combination of the Marantz NR1200 with the Bowers And Wilkins 607 s2...thank you.

[@living_entertainment]

We would have to find some time to dedicate to pairing them up but based on our experiences with the NR1200 can sound a little muddy at times (when it comes to music playback at least). Some speakers like the Dentons mask this well but I have a feeling the 607's might enhance that muddiness (though there's also a chance they might clear it up as well). Impossible to say without testing but it might be a while before we have the chance to test this specific combination.

[@mshiladitya86]

Okay...thanks a lot...what do you think in general about a Marantz and BnW 6 series combination, is there a chance of the final output being too bright?

[@living_entertainment]

@@mshiladitya86 Honestly not the biggest fan of B&W on Marantz (although the 700 series does sound superb with Model 30 which we have a video coming out about soon). I wouldn't say they sound bright but in our listening tests the clarity you would expect from B&W doesn't come through in a way that you would buy the brand for. We much prefer pairing them up with the likes of Hegel. Marantz pairs better with the likes of Monitor Audio Bronze/Silver and Wharfedales Diamond/Evo range to our ears.

[@mshiladitya86]

Alright ....thanks a ton ..will keep these in mind.

[@andreassouth1523]

The wharfedale dentons 80th anniversary had more soft treble/less fatiguing than the 85th.

[@living_entertainment]

That's interesting, we have never had the opportunity to hear the 80th anniversary model.

[@user-tc7pe9uf2i]

Could you compare the dentons to the LS50s??

[@rockroll4553]

Wharfedale Linton The best!!!For me, it is paired with an Advanced ACOUSTIC XI-125 AMPLIFIER!!!He's very there !!!!!!!!!!!!

[@living_entertainment]

Awesome set up!

[@contadlasczyk7633]

I'm using the rotel with a pair of 1970s BW dm70 electrostatics ......fantastic

[@living_entertainment]

That's cool to hear! Never would have thought of pairing this amp up with some electrostats.

[@contadlasczyk7633]

@@living_entertainment I took a chance on if it could drive my old 89db statics.....but it's fine. The speakers are so good they probably deserve high end amplification but the rotels coping

[@radicalgambino2959]

Could you do a seperate test with headphones?

[@paulhanlon5112]

Im probably a little late for comment , but i own the 85 Dentons and do find them stingy, ARCAM A39,,,a handy upgrade is to Single wire them (No Bi Wire) and take + link out and fit a 1ohm resistor in place of the link,,,Smoother treble and a all round Fatter sound,,,,costs about 50c and is noticeable improvement 😂

[@sathramsrinivas3208]

Please can you tell Marantz PM7000n will match with the wharfedale Linton ?

[@living_entertainment]

They sound pretty damn good together!

[@seenechetty3669]

Using Polk rtia3, good bass and decent midrange and treble frequency.

[@living_entertainment]

Always good to hear of another speaker that pairs well!

[@seenechetty3669]

@@living_entertainment It's my first component system a11 & cd 11 tribute with Polk speakers which are value for money starting out. Looking to add a subwoofer and turntable, then I'm done.

[@living_entertainment]

@@seenechetty3669 You have given yourself a fanastic starting point! The SVS Micro 3000 is a fantastic little subwoofer for your sort of set up and in terms of Turntables the Pro-Ject Debut Carbon is a good match for your system as well.

[@seenechetty3669]

@@living_entertainment thanks, when you set up a subwoofer, does this reduce the bass on your main speaker, thus allowing the speaker to handle more midrange?

[@living_entertainment]

@@seenechetty3669 Only on amplifiers with an LFE output. Set up correctly it will pull out any presence that was missing from the original speaker pairing.

[@Benieg83]

Purchased the a11 bronze 100 package from you. Whenever i turn the smp on or off the speakers make a really loud pop noise. They also pop every time i turn the volume up or down. Help.

[@living_entertainment]

That doesn’t sound normal, can you please send an email to [e-mail] and we will get you sorted.

[@SVK80]

Whats your opinion about pairing Linton with Rotel A14

[@living_entertainment]

Thats a good question, we haven't actually had the chance to pair it up with the previous Rotel A14 and we no longer have access to that Rotel unit. We can test them with the new A14 MKII however, maybe we will revisit speaker pairings for that amp at a later date.

[@SVK80]

@@living_entertainment Thanks for your reply and eagerly waiting for Mark2 review...

[@dadoluka4648]

greetings! what do u think about this rotel with quad 21l?24m2 room,and dacmagic 100 connected to tv...

[@living_entertainment]

We aren't a dealer with access to Quad speakers so we unfortunately can't really do a test to find out.

[@dadoluka4648]

@@living_entertainment ok thanks

[@cschoi100]

Would denton + PM8006 a good match?

[@living_entertainment]

We haven't tried the Dentons on the PM8006 but we have enjoyed them on the PM6006 so the extra power of the PM8006 should only improve their performance.

[@dudiflug3804]

I have the naim nait 5si , is the silver 100 going to be a good match? Today I have the paradigm studio 40 v3 I really love my speakers but I need more bass

[@living_entertainment]

We aren't a Naim dealer so it's not a pairing we have tried. Hopefully someone in the comments section will be able to help you out!

[@cschoi100]

Proac studio and harbeth p3esr match very well with naim 5si

[@yippie6862]

What is your favorite amp to use with the Denton's?

[@living_entertainment]

At the moment its the Audiolab 6000A/6000A Play. :)

[@yippie6862]

@@living_entertainment Better than the Leak?

[@living_entertainment]

@@yippie6862 The two offer a very similar audio experiences, aesthetically however I think the Leak looks nicer with the Dentons. BUT in terms of sound the Leak and the Audiolab are so close that for most people they could be interchangeable, in this set up atleast.

[@yippie6862]

@@living_entertainment Thanks for the reply.

[@jcalberto]

What do you think about the Rotel A11 Tribute + Dali Oberon 3 combination?

[@living_entertainment]

Not a combination we have heard so we can't really form an opinion.

[@richardhincemon]

Rotel A11 integrated amp with Dali Spektor 2 speakers 👍

[@DruvisR]

Great video! Find the most suitable amplifier for Denton's..

[@living_entertainment]

In our experience our favorite amplifiers with the Dentons are the Audiolab 6000A and the Leak Stereo 130. :)

[@inesbloxlife]

To me it's either this or rega brio

[@MrJueKa]

Wharfedale Linton = in Germany I`ve seen them for 1,100 EUROS = 1,130 USD as a pair + stands as a regular offer, elsewhere in the "EURO" area I see this combo for up to max 1,400 EUROS = 1,438 USD ( all in mid 2022) more than words can say = "Wharfedale Linton Heritage HiFi Speakers Sound Demo REVIEW Video £10k Sound for £999" by "Pursuit Perfect System"

[@cschoi100]

Have you had a chance to match Rotel RA1572 with Linton? Do you think they also match well?

[@living_entertainment]

Yes we have, assuming you mean the RA1572 MKII! Tonally they are nice together but the combination didn't have the bass authority we are used to from the Lintons when paired with other amps of similar power.

[@allenwilliams8962]

@@living_entertainment very interesting comment. I did critical listening A/B tests with Yamaha As-1200, Technics SU-G700 mk2, Marantz 30n and I chose the Rotel 1572 mk2 for bass authority. It had more attack, deep bass and excitment and the snare drums came alive way more than any other amp tested.

[@giannislarch]

Nicely made review, but as there isn't any music playing to hear their sound, it's disappointing..!

[@tombradfiled9342]

A few weeks ago I sold my Yamaha A-S2100 and B&W 603 combo, was trying to free up some money to try something new and more budget friendly. I purchased a Cambridge AXR100 and was going to just run them with my Jamo S809 towers that were on my surround system, as good as the 809 are at their price point they just were not cutting it after I had the 603 in my front room. My new speaker choice to pair with the Cambridge was either going to be the new KLH Model 5 or the Linton's with the factory stands, I chose the Wharfedale after reading and watching extensive reviews. What attracted me towards the Linton's was with what I understood about the model is they were not very finicky about the electronics that drive them, being I only had a $500 Cambridge that might be an excellent attribute to have. I have to admit there was anxiety if I had enough power to get the sound I was looking for, well two minutes after hooking the speakers up to the receiver that anxiety quickly disappeared. It's a very good pairing that exceeded my expectations and for half the price as my old system could not be anymore pleased. Before I selected the Cambridge the Rotel Tribute was in serious contention, I probably did leave some performance advantage on the table but fully appreciate the Cambridge sound signature and feature set.

[@living_entertainment]

Honestly, I dont know what the limitations of the Lintons are, I have a little 25w micro amp im going to try pairing them up with on the weekend just for curiousitys sake but at this point I think I can consider the Lintons to be a miracle speaker. Its great to hear you have been enjoying them with your Cambridge!

[@andreassouth1523]

Laid back sound or neutral or slightly forward sound?

[@ing.enuity3392]

Hi, could You tell me differences between Audiolab 6000a and Rotel a11 tribute. Im thinking about one od them to Lintons... :)

[@living_entertainment]

Absolutely, sonically the two amplifiers perform VERY similarly, the Lintons really do have a sort of house sound that amplifiers dont seem to have much of an effect on, however, the Audiolab 6000a has a wider and more detailed sound stage/imaging when paired with the Lintons, atleast when using a digital source.

[@ing.enuity3392]

@@living_entertainment do You know maybe Marantz PM6007?

[@living_entertainment]

@@ing.enuity3392 The Marantz 6007 sounds alright on the Lintons tonally but you dont get the level of detail/clarity/seperation from that pairing that you get with the Audiolab or the A11 Tribute.

[@dynodin81]

Awesome! Just the question/answer I was looking for.

[@cobraflunkie]

Can I just double check which b&w speaker you are referring to? 607 ‘s are mentioned but the video links say 606. As they look identical to me I can’t tell for sure. Can you please confirm? I have listened to the 606 s2’s with a few different amps and I like them. Marantz 6006 and NAD 328 we’re both good. Can you give any comparisons? My only concern is treble harshness which I experienced with the marantz 5005 and that was a bad mix.

[@living_entertainment]

Apologies, in the video we used the 606 S2, I misspoke, though we have also tested these with the 607 S2 since filming and found the results to be largely identical (the 607 S2 being smaller were a little lighter on bass due to the smaller driver and cabinet). I definitely wouldn't describe them as harsh, just a little forward in the treble department. The sound with the Tribute isn't all that far off from that with the Marantz 6006, but give them a listen if you can!

[@cobraflunkie]

@@living_entertainment thank you for that:)

[@RockCity1111]

607s have a 5 and 1/4 woofers and the 606 s2 has 6 1/2 inch woofers

[@skeezer180]

I HAD LEAK STEREO 130 WITH THE LINTONS NOT A GOOD COMBO BOUGHT THE REGA ELECE R WHAT A DIFFERENCE

[@zvonimirtosic6171]

Lintons have uncanny ability to make things sound better and with dignity. I tested Lintons with Rotel A14, which is nearly 2x as powerful as A11 Tribute, and A14 lacked juice in some tracks and types of music, and the stage could still be improved upon. I wouldn't drive Lintons with anything less than 2 x 120W or 2 x 150W.

[@dummag4126]

Silver 100 serie? 6 or 7?

[@living_entertainment]

These are the older 6 series. Yep.

[@vegguerilla]

Not an audiophile playing stuff on KZbin in echo rooms but I have the rotel a11 tribute paired with a pair of mission qx2 mk2..the warmest sounding musically detailed pairing I've heard to date..I come from the dj era of the 90s..we like warm punch with energetic detail but not overly bright...I'll do a test of that one day and blow these speakers away clean... And why do these so called audiophile dudes spending grands set up systems in echo Chambers with no soft furnishings to soften the ever impending brightness echo..I can't work it out..why demo in a sterile environment with no dampening..go into any studio and its dampened..these KZbin guys have no clue of true sound demonstration,period!!!!!

[@living_entertainment]

Sound demos on youtube are pretty useless, between the recording space, the mic, the A/D conversion, the EQ in editing, the videos codec and compression, KZbins FURTHER compression, and then the viewers DAC and Speakers/Headphones there's next to no useful information left. We try to explain our experiences, and while that's not as instantly gratifying as a "sound demo" for more people we think it's a much more useful tool.

[@plusforce]

Is the sound quality better than Marantz 6007?

[@living_entertainment]

Its an apple and oranges comparison, it comes down to speaker pairing and sonic preferences.

[@plusforce]

@@living_entertainment speakers are Revel M16

[@bruunm1975]

A11 with Monitor Audio Monitor 200's (orange cone)?

[@living_entertainment]

We haven't tested those speakers specifically but based on our experiences with other speakers in the Monitor Audio range we think they would sound pretty great!

[@bruunm1975]

@@living_entertainment Thanks!! Just bought a second hand 2i Node... and see how it goes with my Yamaha 303... if that fails I will just get the A11 Tribute to run the Node through... Main reason is, Musiccast sucks... and I miss gapless playback and using just Tidal app instead... Monitor 200's sound great for what they are (specially at 630 special I got them for). DAMN rabbit holes...

[@living_entertainment]

@@bruunm1975 I dont think I could live without gapless playback.

[@bruunm1975]

@@living_entertainment Yeah I am the same, Node2i shipped today. So that will be good, Tidal Connect! Also saw a second hand Rega Brio-R... So I need to be sensible, but I am 100% sure it would 100% sound better than my Yammy ;)

[@bruunm1975]

Na... bought the Brio-R...

[@bidenneedshisbuttwiped]

Can someone explain what imaging means?

[@living_entertainment]

It's the presentation of the sound coming out of the speakers. An image is considered good if the performers' location or acoustic material can be clearly located in space. If you were to close your eyes, how realistic does the stage that the instruments are performing on look to you? Do you get the sense that the singer is in the centre at the front, and the bass guitar is to the left? Is it 3D? Or does it all sound flat. Like a 2D image?

[@quicktoevil]

@@living_entertainment nailed it!

[@bidenneedshisbuttwiped]

Thanks for your excellent explanation. I completely get it now.

[@MegaPalesz]

I just sold the wharfedale!!!Don't take it. I prefer Audio Monitor or Bowers!!!!

[@gasolin75]

why the .... would you be worried about parring the rotel with the big linton's

[@living_entertainment]

Because I wasn't a fan of the sound on the Dentons on the Rotel, the Dentons and Lintons tend to have very similar characteristics generally speaking.

[@jimdabomb]

Any time someone says a pair of B&W speakers sounds good, I instantly can't trust them.. I've never heard a good sounding pair of B&W speakers.

[@living_entertainment]

B&W is a very divisive speaker brand and for good reason, their characteristics are very specific and aren't for everyone, or for every genre of music for that matter. We believe what they do they do well, and that's why they have the cult following they do.

[@contadlasczyk7633]

You've obviously not heard a 51 yr old pair of B+W DM70 electrostatic speakers.....

[@davidthom7127]

You sold the most expensive speakers nicely.

[@living_entertainment]

The Lintons generally speaking are pretty hard to beat for their price.

[@rakoksy]

the problem of this amp is the wattage, you can't pilot speakers well. I mean, you can pilot ELac Debut reference b6.2, sure, but you'll have NEVER the best of sound they can offer you. You can't pair two known audio tools just for the hype, you need to pair them with rationality

[@jackarts6901]

I took your advice and bought a pair of B&W 606 S2 Anniversary, Cost me £579 and honestly I'm so disappointed. The speakers are horrible. Theres a massive resonant boost around 8k and it makes a lot of stuff sound distorted and nasty. Every snare drum, every 'S' sound, the sibilance is terrible and it just sounds awful. The amp is underpowered at a paltry 50W and the streaming on it doesn't work properly either, it always glitches out for the first 5-10 seconds of every track, it's a complete piece of crap. Honestly, get a decent amp and get some proper speakers that don't have a crossover that high, the treble is so harsh it's like listening to someone rub their nails down a blackboard. The stands are nice though, I'll keep those.

[@oldschoolbluesplayer5319]

All Talk and No Sound Demos???

[@living_entertainment]

If a sound demo isn't in person then it holds no value in our opinion.

[@jasonme3557]

Sorry, The 606's are trash. A pair of Kef's 150 for make the bowers sad. I know I have both. No comparison.

[@RedPMD]

I have both KEF Q150 and 606 S2 AE with centre HTM6 AE and they sounded trash at first but I got to know them pretty quickly by optimising them with the X2700H. Now they sound super super super great.

[@jasonme3557]

@@RedPMD Right one. If you ever like to really step up on the cheap. Check out a set of Elac Carina BS243.4 They go on sale a lot. Dude fantastic sound speaker. I compared them to Kef R3. and Revel. They Wipe the floor on both of them.

[@RedPMD]

@@jasonme3557 Nope. It just depends on your taste in music and how you're able to configure the speakers. If you don't have patience, you will not get good sound. It's that simple.

[@wahooworld]

so where is the speaker cast so we can hear all I hear is your mouth talking!

[@living_entertainment]

We don't believe in youtube sound demos, in our opinion between the recording, the ADC, and DAC conversions on both ends, not to mention the equipment you personally use, they are completely worthless.

[@garth56]

All very low end stuff nice but not for me

[@cremersalex]

Low end or not, I prefer my Lintons over my Dynaudio Confidence 1.

[@deonellis8577]

Rather prefer Dan D'Agostino or Burmester?