A look at Rotorazer. This is a good tool for installing laminate flooring, but is a little too expensive. It does work well, though.
Пікірлер: 204
@suejones60373 жыл бұрын
Thank you, searched everywhere on how to put blade in, very informative video.
@marilynlacomba30403 жыл бұрын
This is the only place that shows how to change the blades, even the instructions are not clear. Thanks for posting this video.
@MrOramato6 жыл бұрын
Your Voice reminds me of my Algebra teacher back in the day. He would go out to the bar till 2:00 am and then saunter into class late most mornings. Then he proceeded to put us all to sleep.
@jlo_too24933 жыл бұрын
Thanks for the vid! It helped me install my 1st blade. Instructions weren't clear at all. This was extremely helpful for installing/changing the blade out.
@Lucero03317 жыл бұрын
I just watched the infomercial of the rotorazer. Of course in infomercials everything works great and are perfect for whatever they are targeting. I check reviews that were ready to destroy the product in the most awful ways. Thank you for the information and demonstration. I will wait until a good sale shows a better price to buy it.
@jwwm27 жыл бұрын
You're welcome. Thanks for your comment.
@GeekBoy036 жыл бұрын
They going for $50 right now with a drill bit kit . He mentioned Harbor Freight, but I don't see a similar saw on there. The closest they have is the Double Cut saw which is actually close to the Dual Saw with the two counter rotating blades.
@StevieRich7 жыл бұрын
Here is some friendly advise, unlike all the ney-sayers and trolls you will find on You Tube, it's nice to see people like you sharing their experiences so that others can make sound decisions when looking to part with their hard earned monies. So, thank you for that. My constructive criticism is about your sound quality. Many go out of their way to get good video, forgetting how important quality sound is as well. You can purchase what is called a Lavaliere Microphone for under 50.00, that clips to your lapel or shirt. It is one of the best investments one can make when doing these types of video reviews. Your fine when close to the camera but as you come and go and move around, it's very distracting to have the sound fading in and out.. also beware of wind and get a foam cover for the mic, some come with. Good Luck!
@jwwm27 жыл бұрын
I have a way of doing things now that includes a wireless recorder. I often use it when making videos nowadays. It's also great for windy conditions.
@svnbit84086 жыл бұрын
StevieRich Seriously, sharing isn't effortless, and convenient, nor economical. Awesome people just have different motivations and it comes easy to them, which I guess makes some rather contemptuous.
@karenkelley51173 жыл бұрын
StevieRich m
@karenkelley51173 жыл бұрын
StevieRich k
@conniestone99146 жыл бұрын
Thanks for the video I was unsure how to do the blades. Very Helpful.
@lynnespringer15135 жыл бұрын
Long story short: the saw can cut through any surface. Each blade cuts a different type of surface. The older model which is shown in this review with SLOW AS YOU PLAY BY PLAY is a bit easier to handle than the newer model which involves using the thumb pushing forward to control the blade. It has be mentioned by some reviewers on QVC that one that does not have strong fingers will left in the gutter with the newer model. If your fingers are used to hanging onto a pencil you will need to strengthen them before using the updated model which is currently being sold on QVC. A carpenter commented on that site stating this has been life's best kept secret. Most of the reviews on QVC concern the plastic adjustment to control the depth of the cut is breaking, the smell of smoke when opening the case, the fact that the newer saw is more difficult than what QVC program depicts, etc. Contrary to this reviewer the expense should correlate with the quality of the item itself. I have been to Harbor Freight myself and have never found many name brand items over there. They have lots of things that IMO could possibly be from China and as such on the lower end of quality. I am not a carpenter nor a fixer upper. I have bought several items at that store to use in my line of work which is fixing smaller things around the house and repairing things at work. If you are interested in this product do your homework. I almost bought the newer one on QVC but, the reviews changed mind.
@willyjilly96844 жыл бұрын
Good review, I noticed the blade put off some smoke when you tried to do a curved cut. That right there tells me in no way does this replace a jig saw or scroll saw. This looks like this has a place for flooring, but the claim the tool company has on their ad is clearly not even close. Only thing I'm replacing my miter saw with is a better miter saw. Thanks for the review as it helped me make a informed decision before purchasing this tool!
@debbiekish61773 жыл бұрын
Thanks for sharing. I couldn't figure out how to change the blade either based on the instructions. Your video helped me. I agree $150 was over priced. It's come down to $89 on Amazon now. That's what its worth. It was probably the first of it kind and now the market has many brands to chose from.
@paulinetravis99944 жыл бұрын
Just got one so thank you help me watching it in use
@remowo_7 жыл бұрын
sir thank you for sharing.Does it cut in an angle?
@GOODNESS-sp4hm7 жыл бұрын
Thank you John👍🏻
@davidjones88185 жыл бұрын
I just bought one 2 days ago great video
@docjohnson39804 жыл бұрын
Great video thanks for taking the time. 👍
@dianaperez29087 жыл бұрын
I placed the blade but is it supposed to go in reverse?
@sw1james5 жыл бұрын
Thanks for the honesty
@GeekBoy036 жыл бұрын
Thanks for showing this. I need to cut some laminate flooring myself, and the saw I used took some chips out of the surface.
@andarusmuhammad9456 жыл бұрын
GeekBoy03 forget that did not work on mines
@lawrieedwards4338 Жыл бұрын
Lawrie Edwards Thank You for the Information it it explained how to use and change the blades in the compact saw in a very simple practical fashion,
@hectorg.72824 жыл бұрын
I am not a pro, got one as a gift and left it in my garage until needed. 3 years passed and finally I tried using it. the thing stopped working 2 minutes into it. Got no more to say.
@lindamaclean82792 жыл бұрын
That is exactly what happened to me. What a piece of junk. DO NOT BUY THIS……
@beatrizriojas15573 жыл бұрын
Thank you for the information, the video was very clear and well explained.
@danfuerthgillis44834 жыл бұрын
The roto Razer has the advantage of the plunge cut which other mini circular saws can not do. Last week I needed this tool and was stuck for trimming a line section out of floating floor material, sucked ass having to use a dremmel with a cutting wheel. Ordered this tool that same day lol.
@gladheateher4now6 жыл бұрын
Will it cut straight lines?
@victornunezboss7 жыл бұрын
HI John Strabismus I was looking your demonstration for the Rotorazer .And Iam thinking to buy one, but before I do I need to see if it can make a round turn cut in a 1/2 inch deep wood.Thank You
@albertobonilla68886 жыл бұрын
No puedo retirar el disco de la roto raze suelto el tornillo y no sale por la parte de abajo gracias
@carls19594 жыл бұрын
Is this from the same company as Rotozip? If so, I have one of those and love it. I've used it on everything from wallboard to metal and it hasn't let me down.
@domr39782 жыл бұрын
How long will the Rotorazer last, how long will the blade last until its dull and how thick of a wood can it cut are all the questions?
@lekhraj50326 жыл бұрын
Is it possible to procure it in India? Please reply
@Orlanzepol1236 жыл бұрын
Do you live near a highway❓At about 4:31 I heard what sounded like a motorcycle speeding by. I’m sure they can speed on a residential area but I just wanted to know if I was right.
@lennycruz45585 жыл бұрын
Nice review,, I'm planning to buy one but I'm wondering if it can cut 3/4 plyboard
@abzborromeo74003 жыл бұрын
same
@markanthonybandoy4683 жыл бұрын
how to use the vacuum cleaner?
@trishwhitney3892 жыл бұрын
Do You know how much each blade costs or to replace..?? And
@luismmm155 жыл бұрын
Thank you. I didn't know how to put the blade. As you said, the instructions are not very clear.
@mikyo4446 жыл бұрын
i got tired on the first minute...whats up with the gong sound?
@mikhail1143 жыл бұрын
Thanks for the review
@antoniosan87717 жыл бұрын
That power button it very tricky ,Especially when you have to hold down the blade guard simultaneously. I think for that price it a rip off.You can get a better machine for much less money in Harbor Freight and better quality.
@WillowsGarden9 жыл бұрын
Excellent review John, I really like this rotorazer. This would be very handy for several projects I have coming up, but I am with you on the price, a little expensive. Another wish list item, lol. Take care my friend and God Bless y'all, xxx
@jwwm29 жыл бұрын
Thanks for your kind words. Yes, it's too expensive, but my wife wants to bring it over to The Philippines. One problem with that is they use 220 volts there, so we'll also need a step up power transformer in order to use it.
@triechane087 жыл бұрын
Hey I was thinking of sending one but what did u get to make it work in the Philippines since yes they used 220V?? Let me know. Thanks!
@docleng48735 жыл бұрын
John Strabismus yes, you will be needing a step up transformer which costs about 100 dollars and up
@lindaharkess47043 жыл бұрын
I have one, never used it, but it a challenge to put the on. The screw is very difficult to losen.
@annepurificacion91473 жыл бұрын
I just bought mine. I can't unscrew (for the blade) it's stuck, I'm doing it the right way, it's just too hard.. I hope you can help me. I don't want my money put to waste.
@pcno28324 жыл бұрын
8:50 That answers the most obvious question that occurred to me when I saw the ad on TV. I don't even see how you could cut a shallow curve very accurately, and it must make a burnt stench if you try to cut anything tighter. We are really talking about a very expensive mini-circular-saw. The ability to do spring-loaded plunge cuts seems clever (though I'll bet some circular saws have that), but I can't imagine very many people needing this badly enough to spend $150.
@shamshudinpremji74274 жыл бұрын
I bought the same tool, but having trouble removing the screw to insert the blade, its too tight, any help?.....
@jwwm24 жыл бұрын
Don't forget that it's reverse threaded. Other than that hold the blade with canvas gloves, or maybe wedge a piece of wood in te blade's teeth.
@adelecondron-king23654 жыл бұрын
Thanks John......YOUR tutorial was MUCH more informative than the crap it came with......any chance you could suggest what materials each blade is better used for ?????...... Many Thanks ...and well done again !!!!!!
@martamccool27403 жыл бұрын
Exactly, is the only place you find how to instal the blades, thank to this man
@scredlysmith21534 жыл бұрын
Where do you buy replacement blades for it
@debbiekish61773 жыл бұрын
Amazon
@FlukeTog6 жыл бұрын
Hope it comes with 900 blades and a smokeless version.
@maryellendunn88992 жыл бұрын
The blade will not spin what am I doing wrong?
@mojojojo75153 жыл бұрын
Thank you so much!
@josemerlinmacapagal73456 жыл бұрын
i like to have it for home use..but you said it's expensive but do you think it's worthy having it?.anyway thanks for the demo bro!
@dandicristina13898 жыл бұрын
that blade is to small to cut 6 in tile or bigger you should use a wet saw
@elzbthg6 жыл бұрын
Looks like it would be great for kerf cutting
@speedhawk48583 жыл бұрын
Thanks for the video!
@arnandogutierrez22814 жыл бұрын
en cali colombia en donde la consigo y que precio tiene gracias
@ferlujan38223 жыл бұрын
No sirve, se calienta muy rápido.
@trishwhitney3892 жыл бұрын
Do You know how much it costs to replace a blade or blades..?? And Thanks for the Demonstration ..!!
@cmoore1858 жыл бұрын
This was a decent review. I was actually watching the infomercial as a joke because i never buy anything from one. I have more tools than i need and have a small 5 and a half inch circular saw and a jig saw that are cordless. I feel bad for people that have paid the big money for this. Hopefully they learned a lesson. Infomercials are always preying on uninformed people. They usually sell something people wouldn't buy if the saw it in a store. Rockwell and Dremel both make very small saws for under 100 dollars. Both are quality companies. There are many good saws that are less than full size for less than this. The worst thing about the saw is this. Why would anyone buy something that they have to plug in if they want portability? Most job sites don't have electricity and battery is light years ahead of where it was 15 years ago. Look at all the hybrid cars. If you need a small saw, go to lowes or home delot and look what you get for that price and you are buying where you can return it if you need to.
@jwwm28 жыл бұрын
+C moore I like this tool. It does what it does well.
@tonydnguyen124 ай бұрын
I have this tool now and I wish the blade is much longer so I can cut thicker wood. It's a little loud, and it produces too much wood powder. The arrow to align with the line is a hit or miss. You can't see it moving forward
@jamesherring19872 жыл бұрын
I solved that problem with trying to hold the death the release for the tray and the on and off switch. Just use a rubber band.
@Cactuscarlo3 жыл бұрын
Thank you for shearing 👍
@michaelrizzo4717 жыл бұрын
can it cut through a stick of butter ??
@jwwm27 жыл бұрын
Yes. It'll also cut through a steel rod.
@andarusmuhammad9456 жыл бұрын
No blade to small to go through
@andarusmuhammad9456 жыл бұрын
John Strabismus that's a lie the blade won't go through wayyyy to small you have to cut on both sides and bend it way too much hastle
@eyejedi3 жыл бұрын
Saw you video on the review, good video, and $150. that is pretty pricey , and the blades to, when time to replace them.
@MrAlittle51508 жыл бұрын
I'll wait for Harbor Freight to come out with its knock off of it, and spend about $40.
@jwwm28 жыл бұрын
+MrAlittle5150 That's good only if you don't have a project that needs to be done right away.
@dgriffin60743 жыл бұрын
If you want to purchase a product made in the same enemy Nation that cursed the World with COVID-19
@Mikem-mq2hh7 жыл бұрын
got anymore oxy's?
@velmacoffey37633 жыл бұрын
I bought one and need a how to use it tutorial. Not an unboxing tutorial. This was sufficient.
@tulioalopez8 жыл бұрын
Go with Rockwell Versacut
@kbbacon9 жыл бұрын
Looks very handy for floor work!
@jwwm29 жыл бұрын
It's very good for flooring. I don't have to run in and out of the house to make cuts, and since it's small I don't have to lug my other stuff out of the shed.
@josephfoster309 жыл бұрын
Looks like it would be hard to make a straight line on laminate?
@jwwm29 жыл бұрын
Joseph Foster Not really. Just draw a line, and follow it with the arrow. It's a good tool, and like all tools it takes a little practice. I recommend this tool. Anyone that's competent with power tools will get the hang of it quickly.
@cwatson427858 жыл бұрын
+John Strabismus hey john thanks for the review. I am a flooring installer and I was wondering how long do the blades tend to last and do you have to buy the blades thru them? also does it create much dust?
@jwwm28 жыл бұрын
+Chris Watson The blade I was using for my laminate floor was the carbide tipped one. I did our house (1,800 sf) and it's still sharp. As far as I know, only Rotorazer has blades that'll fit. If the Rotorazer is connected to a vacuum there's almost no dust to clean up at all. In my opinion this would be a fantastic tool for a pro to use. It saved me a lot of time, and made the job way easier.
@la1967 жыл бұрын
What is the max depth it can cut? Would it cut through a 2 x 4 without having to flip it over? I'm guessing not but just curious.
@jwwm27 жыл бұрын
Maximum depth is about 9/16th.
@vickilarmore-dickey4566 Жыл бұрын
I would like to order it. Called phone number but could not get your company
@ezekiel3189 жыл бұрын
will it cut 2 inches thick lumber?
@jwwm29 жыл бұрын
Ezekiel David No. It only goes 1/2 ".
@oobaka19679 жыл бұрын
+John Strabismus 1/2" ??? *LOL* What a piece of garbage
@jwwm29 жыл бұрын
oobaka1967 Wrong. It's a great tool.
@oobaka19679 жыл бұрын
+John Strabismus A nice toy maybe. At least until you need to cut something 5/8" or larger. I'll stick with my circular saw, table saw, reciprocating saw, jig saw spiral saw and mitre saw. I'll let you play with the Toys R Us saw.
@jwwm29 жыл бұрын
oobaka1967 This is a specialized tool. I have that stuff, too. When I started my laminate flooring project I was using my was using my compound miter saw, table saw, jigsaw, and some other stuff, too. Once I got the Rotorazer i didn't need all that stuff. I could do my cuts indoors, too. It saved me a lot of time and aggravation.
@maxyperson9 жыл бұрын
Looks like a neat Gizmo! Nice.
@jwwm29 жыл бұрын
Thanks. It's more than a gizmo, though. It's a serious tool.
@mrgallbladder5 жыл бұрын
Fell asleep before you finished your first sentence.
@liiliiliiliil7 жыл бұрын
thats priced around 60 to 70$ here in manila philippines
@FireEater5 жыл бұрын
You can’t beat a jigsaw for tight corners just another novelty tool.
@antoniosan87717 жыл бұрын
I think you right , the price is pretty high a tool coming from china..When we can get it for less money here
@Tdub665 жыл бұрын
That tool is $49.95 online right now! $150 where?
@KCSmith314 жыл бұрын
That’s 3 payments of 49.95
@domr39782 жыл бұрын
A SLLOOOOOOOOOWWWWWWW review.
@ccccen6 жыл бұрын
park the car out and turn the garage into your shop :)
@Fabaoguitarbrazil7 жыл бұрын
Here in Thailand they are selling it for 63,00 USD.
@tiha67086 жыл бұрын
Fabão Guitar Yeah and hookers are 2 dollars BUT I'M NOT IN THAILAND!
@gbwildlifeuk82695 жыл бұрын
@@tiha6708 how do you know hookers are 2 dollars? 🤣🤣🤣🤣
@tiha67085 жыл бұрын
@@gbwildlifeuk8269 B-cuz I happen to be a hooker connoisseur
@onegraham7 жыл бұрын
Watch at 1.25x speed
@tippycar Жыл бұрын
This is the damnedest device. Your video was very helpful, especially making it CLEAR the device will not cut deeper than about 3/4”. Even with a line drawn, I have difficulty making a straight cut. I have an average-size man’s hands, but I find holding it difficult because you have to hold the on switch by pulling it directly towards you AND press that lever on the right simultaneously. It’s unwieldy. You really need to have a surface set at a good height to clamp the wood, plastic, or whatever to make the perfect cut. Your video confirmed some things and explained things not in the instructions.
@vickilarmore-dickey4566 Жыл бұрын
Saw a commercial just 10 mib ag
@sasukeuchiha9984 жыл бұрын
Just wanted to state that some websites from facebook have been using this video to advertise $20.00 version of the same product.
@slimmyhendrix40675 жыл бұрын
You can make your own RotoRazor with simple household items from the looks of it. Start with a decent pair of Hair Clippers, Cheese Grater for the Guard, Back Massager Grip, and a handful of Odd shaped non useful hand tools and ill be Got Hammed if u wont have the same gadget in the video
@kermitefrog645 жыл бұрын
Good content but he needs someone like Scotty Kilmer to do the voice.
@me46547 жыл бұрын
boy if I knew how difficult this tool was I would've sent it back.It isn't even what I need and seems to be very limited to pieces unlike the Dremel
@carloscostello91047 жыл бұрын
i guess he doesn't have the vacuum attachment
@chamroeunsdoeung44224 жыл бұрын
Yes, $150 is very hight.
@erwinsalas3378 жыл бұрын
esta bien la máquina pero solo para trabajos básicos no profesionales
@jwwm28 жыл бұрын
I think even a professional could use it for small jobs.
@need100k6 жыл бұрын
If it can't cut at least 3/4" I wouldn't be interested.
@reptileguardian9416 жыл бұрын
That's a tiny tiny blade. Don't think it can handle day to day cutting. It's nice to have as a "specialized" tool.. for that price??? For a saw you will only use 3-6 times a year... No thanks.
@503dcccccccccccc4 жыл бұрын
I had to keep rewinding because I couldn’t keep up
@quentinraffensperger16998 жыл бұрын
I prefer Rockwell versacut.
@jwwm28 жыл бұрын
+Quentin Raffensperger Those are nice, too.
@BrickedUpp6 жыл бұрын
John I believe your video has been stolen. It was posted June 2017, this exact video with music dubbed over though you can clearly hear your voice.
@parrishwoods8 жыл бұрын
I came here because I wanted to know how to get the blade in. and I got all kindo no info stuff.
@jwwm28 жыл бұрын
+connie bell Sorry. Next time I'll confer with you to find exactly what you want to know, and exactly how to explain it.
@frankcm59453 жыл бұрын
NO Sound/Audio
@warpighammer6217 жыл бұрын
In comparison to buying all the other tools this has replaced I think it is more than worth 150 . Plus time I save not having to run to ten Different tools and unload ten different tools. It has more than payed for itself . I'm not trying to down your opinion or you sir . But my opinion is it was worth it. I'm no expert though.
@jwwm27 жыл бұрын
I agree with you.
@brianpinedo64686 жыл бұрын
Our solar sytem is made up of 9 different planets...
@TeamProsperity5 жыл бұрын
Could step it up a little lol
@johnl79797 жыл бұрын
does your wife actually use it??? my wife has arthritis in her wrists. she wants it
@jwwm27 жыл бұрын
My wife has used it, but it was mostly me. It isn't too hard to use. The on/off switch is a tad tricky.
@andarusmuhammad9456 жыл бұрын
John L then she cannot hold the power button in place it's very very difficult
@svnbit84086 жыл бұрын
7:23- Your fingers appearing deceptively close to the blade, added some suspense to the video!
@mememe1868 жыл бұрын
Cheap hobby tool. Not meant for real work.
@jwwm28 жыл бұрын
+Jason Phawes Like all tools it has it's limitations. It's not for huge jobs, but very good for homeowners and custom installers. It's better than needing to buy $800 worth of tools, too.
@tjkustoms8 жыл бұрын
Another lethargic KZbin video! How about having a cup of coffee before you turn the camera on...
@jwwm28 жыл бұрын
I don't drink coffee. It keeps me alert.
@guysolis58436 жыл бұрын
Haha I was just going to say.
@youredefeeted81366 жыл бұрын
HAHAHAHAHAH!!!
@kman7845 жыл бұрын
Great video, that’s for all the great advice and information!!! :)
@SouthCalifas6195 жыл бұрын
Idk why all i can think of is garfield
@selwyn137 жыл бұрын
Next time talk louder. Also, does the box say it is made in the USA? I am very stubborn about buying domestic products.
@TheKyleman9994 жыл бұрын
There’s a volume switch on any audio device you use to play this KZbin video simply increase the volume to get the desired loudness. And another great tool on all smartphones is a great search engine called google. You can type pretty much any question you have into it and find the answer to what you are looking for!! Amazing what a little work can do for you 😉