Rotorflight 2 | SETUP SPEEDRUN | Flash to Flight in 14 Minutes! | RadioMaster NEXUS

[@rickhayes]

THANK YOU, THANK YOU and THANK YOU Jonas for doing these vids!! Sure does take a LOT of the mystery out of the Nexus so anyone should be able to set one up!! 6 months from now these will be mainstream!! So far I LOVE mine in my M4!! Flies amazingly well!! I have 6 fligths on it so far and it's AWESOME!!

[@LichaelMewis]

Have you flown brain 2 or Goosky GTS for comparison?

[@rickhayes]

@@LichaelMewis Sorry but I have not. I was a Team Horizon guy for the last 27 years so all I really have to compare it to is the Spektrum 6250 flybarless controller. The Nexus is miles ahead of that in my comparison.

[@qck57594]

It was quick, but something to aspire too. Thanks again. Look forward to any more videos you produce. Bis Spaeter.

[@nfavor]

Your first video was excellent at explaining the setup. I feel that I can follow it to setup my next model. I'm very curious/nervous about PID tuning and rates. Hopefully that will be covered in a later video. RotorFlight is the future.

[@scrc511]

Thanks Johnny! Those PIDS works! My Heli is now more lock-in. Running mine with Futaba 16IZ. I follow those PIDS with caution 😂, I figured OMP M4 is somewhat close to the 420 Raw, and I’m not a newbie so I did them today and wow! I did your setup also with the M1 and love it, thank you so much! Regards from Cali! Ricky

[@anthonypsantos]

The issue with rotor flight wasn’t that it was hard to set up it was when it didn’t work there was nothing to fall back on unless you popped up on discord. The discord has been amazing though nothing but incredible and willing people on there!

[@Modelpilot]

familiar with rc panes but new to rc helicopters, and choose to go with Rotorflight.... man this is a lot more complex than rc flying :) i'm working for over a week to get my first heli programmed and my head is exploding with all those new terms haha

[@helmut-h.8938]

May somebody helps me with my OMP M1 with Radiomaster Pocket please? I want to turn down the rotor rpm and found the throttle curve th1. Changed the settings but nothing is different when i fly the heli! Is there somewhat locked in the tx?

[@elitecol69]

@Jonas what is the high pitched tinning noise in all the M4 videos I watch, is that the belt hitting the tail boom wall?

[@Johnny31297]

Not sure what you mean, do you have a timestamp?

[@LichaelMewis]

Does anyone know if this FBL will work great in a Steam AK420? I'm coming from Brain2 and Goosky GTS FBL experience.

[@emersonb5764]

Hearing and seeing great things about these units. Could be viable competitor to vbar before long with some more refinement. Make it so it can be 100% updated and set up from the transmitter, AND flies great and you’ll be onto something. Carrying a laptop to the flight line is a step backwards to 10 years ago and I have no interest in going back to that. Appears to be Mac compatible though, so at least it’s in the current millennium. Lol

[@HugeVictor]

Jonas, another question for you: what is the M4 EXP upgrade set for? Can't seem to find much on it...

[@ericcoker8784]

Bro, excellent work and keep doing these as often as you can. Not only your experience would increase, but people will learn from you and grow. Quick question, is the M4 the smallest OMP this will fit?

[@toad2039]

Will this work with my multirotor f7 boards I have laying around or is it locked to the nexus

[@124MPH]

Your amazing with your skills, also useful info in setting up the Rotorfligh programe. 👏👏👏👏👏

[@LichaelMewis]

How is this system compared to brain2? Also, does it have a functional bailout feature?

[@vlmiele]

I've been trying to tune my Goosky Venon on Flydragon for a couple of months now and kind of gave up due to not learning to how read and tune off the blackbox. Today I used this video as my guide and my Venom is flying freaking awesome! I have a Nexus coming and will install on a Logo 500...if that flys good I may have to say goodbye to my trusty Neo's :(. Thanks Jonas!

[@Johnny31297]

Glad this helps! Next I'd recommend you look into M4 MAX and M7 😉

[@vlmiele]

@@Johnny31297 I've built 2 M4's and will be building an M7 for a good friend in a couple of weeks. I am tempted to buy an M7. Maybe when my NME takes a poop?

[@michaeltrager4381]

Do you recommend the M4 ESC GOV mode or the one on the NEXUS? How do you switch from different profiles? Where is that done? Do you have to ARM the helicopter with a switch before the motor runs?

[@bobwatson6558]

Jonas when your setting the roll rate you set 9 degrees. Is that the quickness of a roll.

[@EduardoSousa-rd7rh]

Thank you for your very helpful videos 👍🏻

[@peterivera1704]

What version of firmware you recommend for the tx and the erls receiver That is better for the nexus ?

[@bobwatson6558]

When the compensation is not going in the right direction what do you do or how do you correct that.

[@Johnny31297]

See my previous video

[@HugeVictor]

A little off topic to your video, but how well does the M4 Max autorotate? Can't seem to find any videos showing this

[@Johnny31297]

It autorotates extremely well. I've done it in my videos before!

[@HugeVictor]

​@@Johnny31297Danke from Canada

[@gerrykeaveney1657]

great work. im new to helis, can you do a video for beginner with auto level?

[@Johnny31297]

Same same, map a switch to Angle Mode, flip the switch, done

[@glenncain]

Nice backyard!

[@SteinarWalaker]

wish you can do it on M7 to :)

[@Johnny31297]

Why? It's the same process

[@kilacell]

Someone else needs to do this Jonas is great with the technical side but translating that is ...

[@wrathraptor660r3]

man i wish my tx16 speaker was that loud did you upgrade the stock one?

[@Johnny31297]

No, it's stock, but the MAX MKII has an upgraded speaker 👍

[@wrathraptor660r3]

@@Johnny31297 same radio i have. wierd maybe il buy a new speaker and try it out. thank you

[@reginaldmcnab3265]

You are a badass!😅

[@bredaheli]

I only understand very little, but thanks for sharing.

[@qck57594]

Thank you Jonas

[@ra_Amon]

very good video. In the future please make videos explaining profiles pid gains and filter adjusts. Without the theory behind this things we cannot adjust for our models. Thanks a lot sir.

[@Johnny31297]

50% of that request would already be fulfilled if you go and read the annotation at 10:29 😉

[@NetworksM]

Still a lot of terms to learn

[@sergiy3698]

Мені трошки допомогло. Я хочу подивиться відіо по налаштуваню передавача.

[@gauix7]

You have to study hard to fly an RC helicopter with a rotorflight2 installed. Sad reality

[@shtumpa1]

I thought you didn't have time for anything !

[@Johnny31297]

That's why we're speedrunning!

[@mihavuk]

Dammm... No more Brain and similar crap hassles, where half configuration must be done on radio? 😮👌👍🙂

[@johhny303]

looks like a betaflight fork?

[@bobwatson6558]

Jonas when your setting the roll rate you set 9 degrees. Is that the quickness of a roll.

[@RubenRC94]

Jonas explains this a lot better in the precious setup video. But basically the override (where he sets 9°) isn't a setting at all. It's the same as a stick input but given through rotorflight. What you do here is calibrating rotorflight to rhe actual values on the Heli. So basically you make sure that what the program sees as 9° (this could be 10, 7 or any value) is also what the heli outputs

[@Johnny31297]

@@RubenRC94 This is the correct answer.