I am a professional operator for my living. I have been working for a small specialized firm for nearly 3 months now after 17 years of wasting my life at big hire firms for peanut cards in money. I have been given my own machine off the owner which is a Hitachi ZX145W with a 3 piece boom, dozer blade and outriggers on the chassis and a Rototilt R4 with grab. These things have opened up a whole new set of capabilities within the project i am working on. The controls are way more advanced than the usual setup and so smooth too. My gripe though is detaching the R4 from the Rototilt QH. It runs off the hammer lines on the dipper but with double male to female couplings, there is an electrical connection too. There is always pressure issues with the return pipe to re-connect and a seal with the valve block or the couplings causing leakage (brand new couplings was installed, the old was only 2 weeks old and the same problem happened) So we swapped back to the original 2 week old ones and after a messy change it is no longer leaking. But likely will when i take the R4 off again. I have to take it off for heavy lifting operations as my Prolec tells me when its on there is nearly half a tonne of weight before i even lift anything. So it's brilliant when on, but a pain in the ass when re-connecting after disconnecting.
@dirttickler5 жыл бұрын
I use one of these every day. I find another use for it every day. Has pretty much made a laborer obsolete.
@ProjecTranceDJ5 жыл бұрын
What is a labourer nowadays. They are mostly wanting us drivers to do everything anyway, and get arsey when you ask them to help you with the last crumbs. 😂
@gagecrozier7672Ай бұрын
Is that why it take two years to fix a small bridge?
@notectrl6 жыл бұрын
there is a myth going among machine operators, according to which a real driver can do without this thing, however you put it there certainly are specific situations in which it's either this or forget it, and it does make many things easier. i have just started getting the hang of it but i have workerd a lot together with very experienced people
@slapa1018 жыл бұрын
Thees are so nice yo work with, we just got a Cat 308E2 CR with rotator tilt on it, with claw and everything, it helps alot in many sitautions :)
@chris77777777ify7 жыл бұрын
Really impressive tech
@xl0006 жыл бұрын
Euler must be proud.
@roksanachlebio13265 жыл бұрын
Nice work
@w.eplant30938 жыл бұрын
we are so behind in the uk. i so desperately want one!!!
@jakesemtex8 жыл бұрын
+woosh teck Don't speak too soon Woosh, I was brought up in the UK and tiltrotors are getting common there now. I'm in Western Canada now and they haven't even heard of them here, they're not even sure what a JCB is!!!
@w.eplant30938 жыл бұрын
they are cottoning on pretty quick now see a few about these days
@dannyboy18686 жыл бұрын
Haha so true I can’t see keltbray getting me this kit, cheap fucks
@3cx0005 жыл бұрын
they are expensive!
@RototiltGroup Жыл бұрын
The ROI is quite reasonable :)
@2handsomeforlaw9 жыл бұрын
I wish I had one, I would be much more able, effective, and could offer a lot of services I now can not.
@roksanachlebio13265 жыл бұрын
The best
@mandel48897 жыл бұрын
De kantstenar som ni pallade med gripen lyfte jag för hand på min arbetsplats för att palla 5 våningar :P de gör jag gärna inte om, dom väger mer än jag själv gör. haha
@chezzylee6 жыл бұрын
Quick hitch is gonna weigh loads more with that on, so therefore your bucket will handle loads less at full boom, looks good for intricate work but not bulk excavation.. expensive to fix too no doubt
@RototiltGroup Жыл бұрын
Sorry for the late reply! but thats why customers use our quick couplers, allowing you to take it off when moving large amounts of material :)
@MrWhiseguyy5 жыл бұрын
Toppen!
@roksanachlebio13265 жыл бұрын
Najlepsze
@roksanachlebio13265 жыл бұрын
Am besten
@frankiegardener8321 Жыл бұрын
Youve just killed the tree. You may aswell have pushed it over
@ridewithzak85478 жыл бұрын
Just another copyright of the Steelwrist Tiltrotator !!
@swestalker8 жыл бұрын
+RIDE WITH ZAK are you for real? sweden made indexator and engcon for 20 years..steelwrist did copy them thought...
@evanziemer19675 жыл бұрын
@J Magnusson what an interesting reply! These tiltrorators are fascinating. I'm hoping to buy one next year. Where did you gain your knowledge of these things?