Round Tablecloths Sizing Guide | BalsaCircle.com

[@sp-mb1qe]

I was having trouble with buying right size of tablecloth. Finally I know now because of you.Thank you for your HELP. You are very good teacher .Thank you again. 👍🏻😘

[@BalsaCircle]

You are so welcome 😊

[@SusanFava]

​@@BalsaCircleno nj

[@adrianaariza-jones3694]

This is exactly what I was looking for Thank you very much !!

[@BalsaCircle]

Happy to help! We also have a guide on our website if you need a quick reference - balsacircle.com/pages/linen-sizing-guides Happy decorating!

[@garyjohnson1164]

Exactly the information I needed. Thank !

[@thinkforyourselfjohn3163]

Priceless video. Thank you so much !

[@BalsaCircle]

Glad it was helpful!

[@mandydeane5824]

what is the best length to go for if you have chairs tucked under?

[@BalsaCircle]

We would recommend a midlength drop, so if you table is 30 inches tall then you would want a 15 inch drop. If it's a little longer, it's ok! The tablecloths fabric will just slightly rest on the chairs in that case. If it's shorter, the gap would be covered by the chairs so no worries there either. Hope this helps!

[@melanyblake1470]

I can't find the size for the 20" small round accent end tables. Usually used for a lamp, floral vase, a photo. It's decorative not for eating on. They used to sell these three-legged round tops everywhere and so there many skirts were easily found but now I can't find them anywhere, not even sewing patterns.

[@BalsaCircle]

Oh wow! How high are the tables, would you be able to use a square overlay instead?

[@nomthandazosandi8956]

Thank you so much 💖

[@fuafiva99leota74]

Can you help me figure out what size tablecloth I should get I’m not sure 🤔 The table is 6 diameter

[@BalsaCircle]

If your table is 6 ft across, that's 72" round, and 30" from the floor then you have lots of options. For a little over halfway drop you can use a 108" tablecloth (will go 18" to the floor). For longer, you may want either a 120" tablelcloth (will go almost to the floor) or a 132" tablecloth (will drop to the floor). Hope this helps!

[@BalsaCircle]

We also have a sizing guide on our website if you need more help - balsacircle.com/pages/linen-sizing-guides

[@girliegonzalgo5400]

Thank You for sharing, God Bless! 😍

[@BalsaCircle]

You are so welcome 💕

[@kimd687]

Hello 33inch round table , with 29 inch drop.. should be 91 inches? 😥

[@BalsaCircle]

Yes, 29" x 2" = 58" then 33" + 58"= 91", so that's the floorlength size. Since 91" round is a custom size, the closest to that would be 90". If you'd like a halfway drop, you can use 70" tablecloths. Hope this helps!

[@kimd687]

@@BalsaCircle it did! Thank you so much

[@niamhdee9487]

I’m sorry I’m confused about the math of the tablecloth that was about 6 inches from the floor. I really loved the length of that one. Really great video though

[@BalsaCircle]

No worries, that's the 108 inch tablecloth so it goes almost to the floor on a 60" round 30" tall table. Here's the formula we used: (Tablecloth size - Diameter of your table) / 2 = Drop so (108-60)/2 = 24" drop. Since the table is 30 inches tall, and the drop is 24", that leaves 6 inches from the floor. Hope this helps! Check out our tablecloth sizing guide in the desc or here - balsacircle.com/pages/linen-sizing-guides for more info!

[@niamhdee9487]

BalsaCircle.com thank you very much for explaining that I really appreciate it

[@AbebawTsega]

Yet new ymggew