Rownd -Desktop CNC Lathe- First Setup and Part Machining

[@ttechtv]

Good!!🎉

[@kristofpucejdl]

That manual zeroing to the ‘material centerline’ is so odd. It seems like a simple tool length sensor mounted at known offset from the spindle axis in the x direction should allow automatic measurement for both turning tools and spindle endmills.

[@rowndprecision]

Regarding this matter, our testing processes are in full swing, and we aim to complete them within the next two months. The hardware infrastructure is fully implemented across all machines; we are currently focusing on integration testing. Successfully concluding this process is one of the short-term priorities of our technical team.

[@kristofpucejdl]

@ I don’t see how this responds to my comment about tool length setting but ok… ;)

[@stefandebruijn3167]

Nice work. I did see the nice 'esp32 / grbl' in the menu; always nice to see my firmware being used properly. It does leave me wondering where the lathe source code for GRBL/ESP32 (or should I say Fluidnc for which I'm a founder) can be found? I mean, I'm sure it's not in the main repo's, and it's GPL licensed.

[@rowndprecision]

Sorry for the delayed reply we had some minor problems with the KZbin. For this one and/or any other topics you can reach us via the channels in video and channel descriptions.

[@NoSupports]

4 eksenli gibi de kullanmak mümkün müdür?

[@skchng2002]

Hey, do you have any aluminum machined parts you could share with me? Do you think this machine can be used for mass production if it works 24 hours a day?

[@skchng2002]

How long did it actually take to machine this thing?

[@RoboArc]

What's the build size. Probably hours. I have a cnc and it takes hours, sometimes days to get a part off the way I want it. Machining takes forever, but this machine looks... OK. It's not great, but its pre-built. I'm working in a cnc layth build at the moment, im using concrete and steel for somthing about 2x the size of this and can mill aluminum and steel.

[@rowndprecision]

The part machining was completed in 9 minutes. By optimizing the parameters, it can be completed in under 5 minutes.

[@RoboArc]

@rowndprecision its wood though, commented before I actually watched the video, thought it was brass 😆 yeah it should do wood easily. Let me see it try and mill brass and copper though. Brass I would hope it can achieve. Aluminum as well. Copper I doubt, and steel no

[@SRCN999]

bu paraya cnc freze alınır

[@Fullion-CA]

Yeah a gutless light framed non stop source of problems cnc mill. That or a completely clapped our obsolete hardware and controller software machine.

[@avnipazarbas4346]

Hello As you said you can buy not only CNC milling machine but also so many different machines. But I didn't understand your motivation. This is a Desktop type CNC Lathe and if you need a lathe you can purchase this machine or if you need milling machine you can purchase that one. Milling machine is not an upgraded model of the lathe, so I didn't understand your comparison.

[@Ryxxi_makes]

poor e stop position..