RSV4 - Part 13,14 and 15

[@Andy_Bat]

That talking with his eyes closed really freaks me out, I had a teacher in infants school that did that and it affected me for life.

[@giedriusbruzas6542]

Schrodingers motorcycle: roadworthy and a deathtrap at the same...

[@JimBiddle.]

But you won't know which it is, until you ride it.

[@__Max-oe6zm]

Just seen this bike was advertised for sale for $15k Posted on a MAD MAXY video titled: "First Ride FULL CARBON RSV4! ‪@CJMediaOfficial‬ Build!" RIP buyer

[@michaelblackmore4634]

I got a new seat cover for my bike, the original was split. It was tight and I couldn't fit it, got a professional to do it 😊

[@stevesanelli90]

The Toyota RAV4 rebuild would make a bloody brilliant episode. One of those amendments allows to ride a totally unregistered bike on the road. Upstanding god fearing citizens

[@Space_Reptile]

im glad the brillo pad is back

[@ryanmcdonald1632]

At 24.46 did you miss the massive arc that came out of the rear indicator area on and he wonders why he's having electrical issues things are shorting out

[@michaeldemetriou1399]

I don't think you are going to finish the Ginger Ferrari series through no fault of your own Matt, or the Ginger Van series🤣

[@highviscosity749]

Why? Did ginge sold them?

[@michaeldemetriou1399]

@@highviscosity749 I think Ginge wont be able to fix the Ferrari because there is nothing more expensive than a cheap Ferrari that has been in sea water. The van he bought from the Marriot hotel was knackered, he is unlikely to get views for fixing a van.

[@melthebelgian.5837]

Confucius, says "if you can not afford two, you can not afford one" he bought a half of one.

[@highviscosity749]

@@michaeldemetriou1399 I hope he does some more of the Ferrari episodes.

[@michaeldemetriou1399]

@@highviscosity749 I hope he does too but I can't see it happening

[@Britisharmy22]

if it leather heat up it going to sag more plus If either of your brake sensors fail the brake light will stay on. Severed wires, dirty sensors or melted sensors can cause this failure. If your speedo works then your rear sensor is definitely OK. Make sure your front sensor is clean and wire is not severed

[@wibblywobblyidiotvision]

At 46:06, you're missing the wonderful segment title on the bottom of the screen. "Installing brake ducks"

[@TheCerovec]

Legendary

[@e-z.g4188]

Could you do a bit or video on porsche new 6 stroke engine, dust off the white board its been a while 😅

[@iannsr125]

The left fork leg looks bent back , but could be the steering off to the left slightly

[@NickTaylorRickPowers]

As someone who does carbon/ composite. making plugs from parts can be a right pain in the ass Especially if demand is super low for something don't expect it soon, do it yourself or speak to the shop about getting one made for yourself it will definitely cost you a fk load more than off the shelf ready to go

[@Chemically_Induced]

59:20 you can see a seat cover staple

[@Jut123]

Oh my! that seat covers all loose like a grannys old pishy chair 😂

[@lifesatoy]

how much weight are the swing arm covers saving?

[@dirtygarageguy]

They're not, they're adding

[@MrMichaelfalk]

The RSV 4 comes with a real pillion seat. The shark fin thingy is not a seat. It’s only a cowl for single rider use.

[@dirtygarageguy]

Really? It's almost like it's a joke...

[@pchobo]

Nice cold solder joints, be right be right. Problem for the next owner (victim).

[@chrisschofield-te4hi]

37:02 Feck sake Matt no ginger minge on your head! Total let down, ruined the vid' for me😂

[@jediknight1294]

4000 miles, 900 of those back and forth to that petrol station?

[@JamesHoover-tr7sc]

Its a framing nailer

[@__Max-oe6zm]

Holy moly it's a ginge fest

[@andyand100]

Ginger ripple smooth hoop trickler

[@anotherhonda9402]

Looks like he's filled a shotgun shell with loose staples and fired them at the seat base

[@H-M-78]

That wonkeyness is probably because the headstock is bent : )

[@SixWheelsDown]

CJ said in that video around 50:00 that the merch on his website was 10$ until supplies last. it was still 10$ when you looked at it. guess he doesn't sell a lot of merch

[@pauln6803]

If only he didn't sell any bikes...

[@Critical_Stinking]

I've got a carbon-effect latex gimp suit.

[@Bladerunner4511]

Wheres the wig 😂 its not the same without 😅😅😅

[@ANDYblacks13]

his other half fell asleep with it still on after a heavy session and he couldnt risk waking her up as they would want a lift to the offy with a long shopping list

[@markbove6108]

My leggings get tighter over time! I do eat a lot of pies though.

[@mattploij2673]

seems about 13 grand for a (not crashed) 2021 second hand base, 18 for a (not crashed) 2021 second hand factory

[@JayVtec-GAMING]

Ginger will lose his life before his license, Watch out for them cliffs Ginge.

[@r3g3d17]

You arent kidding. Ive attempted to buy cars from copart just for the drivetrain and between shill bidders and fees, the math ends up upsidedown.

[@michaelgreen4585]

The bottom of the seat must look like an old dart board

[@Ed_Winchester]

57:25 Godzilla/Matt yawn sync

[@streetwalkerphoto]

Talk about mudflaps , my bike’s got ‘em!

[@nigelcheal8499]

Which reminds me… what’s happening with project Isaac?

[@JordanReidy]

the injection moulding is to hard for the abs factories in China to duplicate but a terrible carbon fibre company can make them

[@reimop9595]

@20:02 christian bad boy 😂

[@StephenSingleton-om8oe]

Every Kent knows you use no nails not superglue 🤔🤔🤔

[@Section59.]

Every carbon part on that bike has a different size weave and i cant unsee it, looks shite

[@mountainbearoutdoors]

wont be taking this helmet seriously after he binned his bike off a near straight road into a canyon, total yank incompetance as per usual.

[@mrmr9767]

It,s a fanny pad

[@andrewlavelle8048]

this guy invests hundreds, if not thousands, of dollars for parts - but how much would a manual cost? or even looking up the wiring diagram online?

[@771racing]

If you think $1k is a ripoff for shipping a salvage auction bike, wait till you dig into the details! - You are not allowed to pick up the bike, even if you literally live next door to the facility it's stored at. You HAVE to have it shipped. - You have to pay a fee for the privilege of paying for the bike. Bike auction ends with you winning for $1000, even if you go in person with $1000 in cash (not allowed) you'll have to pay a fee on top of that $1000 literally to cover the 'cost' of paying them. The salvage auction game is nuts in the US. I've shopped it a few times hoping to find a cheap base for a race bike build, but a $2k wreck will end up with $2k or more in fees...

[@TheCerovec]

But we have seen him picking up the bikes from the auction salvage/scrap yard before.

[@771racing]

@@TheCerovec I'm curious who he's going through, I've got a local Copart, in theory I could pick up directly from them, but lately all bikes seem to get funneled to Crashed Toys who will NOT allow local pick up.

[@TheCerovec]

@771racing Maybe the procedure has changed since he did his first few projects. I'm sure he would go there personally to save 1k.

[@771racing]

@@TheCerovec yeah, $1k would inspire me to drive pretty far to pick up directly too.

[@supermotos]

That is BS, you can pickup from Copart. He probably just bought it from a lot that was far away.

[@jamesallen4050]

There are so many things wrong with this job, and why did it pass an inspection with the exhaust fouling on the swingarm (cover)? What is an 'arsey 4'? (answer: shitting, or putting a willy in) Why is the bike cranking for several revolutions before starting? Is there a word for when you're laughing out loud and cringing at the same time? Was the tricolour on the seat meant to ripple so it actually looks like a flag? What the hell is going on? Too much to mention but, this is really very, very bad.

[@DeusManifest]

This is a random whinge, but I don't get the obsession with those short exhaust pipes, it looks like someone took a hacksaw to the catalytic converter, at least extend some straight pipes to the ass. Maybe it would look better if was more flush with the body panels, but sticking out like that it just looks like shite.

[@alien1366]

£11500 pounds of his own cash and how many man hours. Even at £20 per hour that should put another 3k on the bike. I personally wouldn't touch it in this finished state. Waste of time but I suppose he gets paid by KZbin

[@NickTaylorRickPowers]

Assuming his time repairing it is only time seen on camera I bet there's tons of hours of footage on the cutting room floor Like hundreds of hours off camera stuff as well And the editing and uploading

[@alien1366]

@@NickTaylorRickPowers Just another wheeler dealer. Anything pre crashed avoid...

[@Chemically_Induced]

What is it with people putting virtue signaling scriptures in their exotic vehicle restoration videos? They don't even have a fitting context to the video. What's "meek" about building a Italian sports bike with the MSRP of a humble compact family sedan?

[@melthebelgian.5837]

But I have a Ferrari and 10 super sports bikes and read the Bible except this verse, Mathew 19:23-24 - Then Jesus said to His disciples, “Assuredly, I say to you that it is hard for a rich man to enter the kingdom of heaven. And again I say to you, it is easier for a camel to go through the eye of a needle than for a rich man to enter the kingdom of God.” like a lot of scripture spewing Kent's, and tv preachers.

[@gafrers]

Once a Kent always a Kent... or Ginger Kent growing up, getting closer to the Goatee Master 270€ without shipping; for that garbage.