RSX quick release setup install with working horn!!

taking a break from the drive train to give my car some added scene points. Watch as is show you how to properly install a quick release set up AND keep your horn working!

[@tonydisabatino]

Super appreciate the video. I just did this install and you do not need to remove your clock spring if you use the NRG Hub: SRK-131H

[@TLil21]

I’m literally right there bro but I can’t seem to bypass my damn srs light. Any ideas? I’ve seen people use 2 or 3k ohm resistors but my yellow srs connector has more than 2 pins & it just simply doesn’t work.

[@DanGjdm]

I second this, the resistor provided doesn’t fit the srs plug

[@alvaroreyes4563]

Could you give me the links for everything you got for that setup?

[@dc5hondahead629]

Thank you so much for your video it helped me and my cousin out with the rsx The horn works now

[@patrickpaul4901]

Been searching for answers about the horn and nrg hub inner dimensions for 2 days and this is the only thing I have found that answers or gives advice about the momo ring and horn mounting. Big thumbs up 👍🏻 going to go find me that nrg ring.

[@trippyneega]

you have no idea how much your vids have helped me out bro, thank you for your vids🖤

[@markmlinar1511]

This Honda part # will get you a nice copper piece to activate the horn 35259-SH3-A02

[@Ryuga117]

35259-SH3-A02

[@mrrandom9732]

I’m curious as to where the positive terminal gets hooked up too

[@dravenheart2444]

It comes with a male and female ya need to get rid of the male and change it to female for it to work they didn’t show that

[@MJC-GSXS750]

That MoMo wheel, is the closet to a DC5R wheel. The stitching and leather is identical. Hence why i should of got one of those over the 2 other wheels i ran in the past.

[@williamlevy1981]

I.m.o. the horn button wiring and turning off an SRS light are the most important issues to address.

[@P4wgluvah]

Good stuff bro, everything was straight forward, easy to see, and the result that came out for me was amazing. Just gained a new sub! Looking forward to more stuff bro.

[@MrJHoop]

Yo man I use the same boss and hub kit in my dc5 but with a 330mm omp wheel and love the set up Nice mod on the horn 👌🏼

[@MattSeals]

I appreciate watching through your web videos. Thanks!

[@randyvelasquez7908]

Can you send link for hub and quick release

[@s2kderick]

If i’m using the SRK-131H (which goes over the clockspring), where do i tuck the orange wire into since there is no brass backing?

[@matthewstewart7712]

I’m using the same hub, what have you found? I just ended up keeping the clock spring and running all the wires airbag, horn, cruise control through the hub

[@MurpheeLaw]

Where does the Power come from if that upper part is the Ground?

[@kseries20-24only]

@SERGMOTIVEGARAGE thanks man, I needed that! One more thing off the list to fix on a RSX flip I'm doing for a friend 👌

[@davidcaballero8655]

Thank you for the info I just did my rsx

[@gilfigueiredo5721]

Like the end result! Keep it up

[@patrickbz5272]

Hey bro, can you buy that O-ring for the horn button separately? If so, care to share the part number? Thank you

[@TLil21]

Great video but how did you bypass the srs light? I’ve seen people do it with 2-3k ohm resistors but my yellow srs conector is not the regular 2 pin, it has more & can’t get it to work. Any help would be amazing.

[@atvthings6887]

I’m working on wiring the horn but for some reason it honks when I’m trying to put the steering wheel with the quick release on the wheel

[@gspd5502]

What about getting the oem turn signal cancellation work with the NRG/MOMO setup?

[@SERGMOTIVEGARAGE]

if you do it the way i did it in this video the cancellation will still work.

[@gspd5502]

@@SERGMOTIVEGARAGE Thanks! Love your videos! Keep up the hard work.

[@GAMERsouthsider13]

Running the nrg set up and mine still works

[@tonylee7825]

I really like this same setup and planning on doing the same as you. I do have one question regard the part that NGK made at 11:10. Do that part comes with it or do you have to buy it separately? Thanks in advance

[@sodentsodmg7876]

wat size is the airbag bolt

[@carlosnieto8882]

Where did you buy the nrg piece that allows you to be able to hold the momo horn in place?

[@MJC-GSXS750]

Why didn't you just pull the fuse under the hood? Anyways, that wheel was the one i wish i hag got, over a couple different personal/Nardi wheels i ran, when my rsx was in action. Right now my RSX has no engine, sold the Brembo's ect. Going to be doing a AWD setup in the future. Loves the vids man :-)

[@ernestosanteliz7145]

I just got one installed today but I need help connecting the horn

[@Hello_its_me_mario]

Where did the yellow wire on the quick release go to?

[@paulescoto9181]

Yoo get the K tuned race spec shifter💯☝😎 loved the video very helpful

[@iefan7951]

Great tutorial! Does anyone know how to fix the airbag light

[@marvinramirez8948]

Link to hub and quick release?

[@bda7dd30]

Sermotive where did you get the hub and quick release

[@gerardlaluna_]

Does the turn signal cancellation still work with this set up?

[@amaterasu8829]

How long did that MOMO steering wheel take to come in? I ordered MOMO stuff, and it took 3 months to finally arrive lol

[@alvaroreyes4563]

Tyler Appel order one on carid.com bro, should come in like in a week

[@williamlevy1981]

Which country do you live in ? If you're in the U.S. of A. , you can order directly from MOMO, amazon, or Swap Shop Racing.

[@jonathancaraballo6429]

Nices,, great ,,,now i can install my horn

[@johnr154]

What about the airbag light?

[@victoravila2698]

Thanks bro

[@shadayrosario1494]

Can you provide the links please

[@PeteSiebenand]

Air bag light?

[@treflippa2]

You have to wire resistors in if you don't want a light.

[@SERGMOTIVEGARAGE]

ive had an airbag light since the day i bought the car lol nothing some electrical tape behind the cluster cant fix 😉

[@KtuluLeaderRise]

Can you link me eberything you used please

[@KtuluLeaderRise]

Link from where you got eberything

[@georgebonney90]

👍