RTL SDR v3 & v4- INSTALL & TEST , 2023

AIRSPY SOFTWARE DOWNLOAD - INC ZADIG
airspy.com/download/
RTLSDR MAIN WEBSITE
www.rtl-sdr.com/buy-rtl-sdr-d...
NEW RTLSDR V4
www.rtl-sdr.com/
AMAZON PURCHASE V3

[@TimR1099]

Thank you! Now I can hear signals!!! I’m a subscriber now.

[@HamTechRadioScannerDrones]

Thanks for the sub!

[@martinglaser-hauschka5102]

Thank you so much , for this Great Video!

[@HamTechRadioScannerDrones]

You're very welcome!

[@MELERIX]

you have RF Gain too low, that's why you are not receiving more signals.

[@HamTechRadioScannerDrones]

Thanks I will try again .

[@kendexter]

ohh, i said it too . read this later and yes RF Gain was off

[@Swede4Trump]

Greetings from Sweden! You, Sir, just got yourself a new subscriber 🎉

[@HamTechRadioScannerDrones]

Hi welcome

[@nickrolfe367]

Thanks for this video. I have just ordered a V3 and it is arriving tomorrow, I'm sorry but I may have a few noob questions coming soon. Can't wait, I have got it mainly to listen to SW. Thanks.

[@HamTechRadioScannerDrones]

It's a very good device get a good antenna .

[@nickrolfe367]

@HamTechRadioScannerDrones HI yes once I've covered the basic I will, I live in the middle of nowhere in Wales so I have no restrictions. Thanks.

[@joeymertle9809]

Thank you. Your a life saver.

[@HamTechRadioScannerDrones]

Glad to help

[@marijnneet445]

Thank you very much. Your video was very help full to me.

[@HamTechRadioScannerDrones]

You are welcome!

[@user-wc1sb9bn1q]

Thank you so much for this video, game changer.

[@HamTechRadioScannerDrones]

Glad it helped!

[@ryanten6475]

excellent video for newbie: thank you very much 🙏🙏🙏👍👍👍😘😘😘

[@HamTechRadioScannerDrones]

Thank you too

[@kjj_photos]

Mine showed up as "Blog V4" in Zadig rather than "Bulk-In, Interface 0" like your video. For anyone else getting stuck at this step, the RTL SDR site has this to say: "Note on some PCs you may see something like RTL2832UHIDIR or RTL2832U or Blog V4 instead of the bulk in interface. This is also a valid selection. Double check that USB ID shows "0BDA 2838 00" as this indicates that the dongle is selected." Now my USB ID just shows "0BDA 2838" - I'm not sure where the "00" is found but I am moving forward assuming I have the right selection in Zadig. Just thought I'd share.

[@HamTechRadioScannerDrones]

Thanks

[@christiantaylor7883]

I fuckin love you. Thanks

[@HamTechRadioScannerDrones]

Lol

[@rohnkd4hct260]

Very good. Trying to get mine working

[@HamTechRadioScannerDrones]

Cheers very good sdr.

[@SP9IPZ]

Anyone has problem with 2 second delay between signal and audio?

[@guidelineuk4876]

Hamtec saves the day once again...v4 on the way :-)

[@HamTechRadioScannerDrones]

Thanks loads

[@thanosgeorgopoulos5885]

how can i listen short medium waves in v3??I use the sharp program and antenna the aor 7000 and I receive from 25 MHz and above what moment ..what is wrong ??

[@HamTechRadioScannerDrones]

kzbin.info/www/bejne/gYusaGycnJV8mdksi=xm28v6HsuxwkDj4R

[@nickrolfe367]

Hi mine came today but the antenna base the v shaped thing on one of the connectors on the base there is no thread for the antenna to plug into so I only have one connected, can you advise please which antenna to buy? Thanks

[@HamTechRadioScannerDrones]

That antenna is rubbish

[@BenTrem42]

You actually couldn't find an active 2mtr repeater? Doesn't that show ... well ... nothing?

[@BenTrem42]

_"Let's go for 77"_ means nothing.

[@BenTrem42]

amazing how you managed to find nothing at all.

[@HamTechRadioScannerDrones]

Ok

[@HamTechRadioScannerDrones]

OK.boring I had lots fun

[@HamTechRadioScannerDrones]

Fun is in the trying

[@yavamaystudio8045]

Thankfully grate film❤

[@HamTechRadioScannerDrones]

thanks