Ruger PC Carbine Review: Part 3 - External and Operational Featrues

[@chiwawa130]

The only video on this Carbine that shows how to adjust the takedown knob. Thank you.

[@garys9638]

Great review! Thank you sir!

[@doctorxring]

13:35 Excellent point. This looks like a superb take down design. Locking lugs on barrel go into receiver mortice and then the adjustable locking nut holding it tight upon indexing the barrel.

[@scott1lori282]

Great detailed look at this great gun. I love mine. Only thing I can add is to use LockTite Blue on threads. Look into Mcarbo internal up grades to make it a very reliable tank of a gun. Also if you adjust length of pull look up in the hollow stock. I wrapped OEM parts after Mcarbo upgrades in a piece of old sock and store in butt stock. I also used piece of old sock to store 3 9mm rds in there. You never know!

[@survivedsavedjohn1468]

So what about the configuration did you say?

[@mk.1175]

DO WE NEED TO UP GRADE THE EXTRACTOR? OR NOT?

[@steimystein4368]

I love mine. I waited for the chassis model.....no modifications needed, just an optic and I'm good.

[@ironhorse127]

Very enjoyable and comprehensive overview of this carbine. I picked one up a few days ago. Unfortunately mine is the 10 round non threaded model. The only one my lousy state allows. I have one tiny suggestion. Ruger supplied 3 allen keys, stock spacers, and 2 magazine adapters. Ruger could include a small threaded cap to install on whichever side you dont have the charging handle. The open threads allow an avenue for dirt and debris to enter. I solved the issue with a 1/4” long set screw. I know im nitpicking, but just a thought.

[@PointWithin]

ironhorse127 can’t wait until they’re available here in California

[@ironhorse127]

Maurice Lewis hoping that happens soon for you guys. In NY We’re in competition with California for the most unAmerican state in the union. Lol.

[@sumosupremeking360]

The quarter inch set screw suggestion is a great idea thanks

[@humacao01]

what state im in CT and im looking to get one it will have to be the 10 round magazine

[@truckingpix]

Thanks for the detailed review... Really appreciate your efforts!!!

[@dansigmon1559]

Great in depth review. Thanks. I am looking forward to picking up one when available.

[@usmc6429]

I will be getting one of these, I may wait a few months to see if Magpul comes out with stocks for it. I like the same light as you, for the money you can’t beat it. Great review

[@redwolf8539]

Great videos! Thank you for all your work. I learned a lot.

[@mits_6131]

Great review. Thank you.

[@dexstoy]

Thank You for the detail you have put into the reviews of this firearm. YUP, I'm still getting one too!

[@soaring16]

Can't find a single thing I'd change on mine. Love the weight for accuracy. Open sights are perhaps the best I've used. Now to try my red dot on it.

[@billnwa2250]

Thanks for the close up looks. I'm sure like this offering by Ruger.

[@ChrisWilliams8301]

Does switching the mag release button to left handed work for glock gen 4 mags? Or will gen 3 and work older? I ask because gen 3 and older mags don’t have the notches on both sides.

[@4sapphireb]

Can anyone tell me if the lower without the barrel attached in below 20.6 inches. This is without the spacers. thanks!

[@bobjustbob5220]

Mine measures 20 3/4 with one spacer added, spacers are 1/2 inch, so YES!

[@trvmcintosh]

I think an offset light mount would work great for mounting a light

[@jennifernichols3684]

I just bought one for $1000 dollars I thought that was a good deal great buy I love this gun I was not new it was used he wanted $1300 but he let me have it for $1000 good deal.

[@thomasadkins7943]

What am I missing. My range is selling the pc-9 for $500. Why are you paying $1000?

[@jennifernichols3684]

That’s how much they’re going for

[@jennifernichols3684]

The Trigger pull pounds is 2 lbs. 8 oz.

[@paulruth83]

Very lengthy but very well done. Worth watching every second. I have one on layaway and am pretty excited about this rifle. Already have a Vortex Spark ar red dot waiting to go on it. I liked and subscribed. Two thumbs up!!

[@chucktice1937]

Ordered on as soon as I could. I was able to hold one right after they came out. Can't wait to get it.

[@patriciawiggins237]

I ordered a nylon carry case from Luger special made for this gun . Only twenty two inches long,. Extra pockets and mag pouches. Around. Nintey dollars but we'll made !

[@iMotoTactic00L]

That be awesome if Ruger included M&P9 magazine block!

[@FinalLugiaGuardian]

I just want them to make it with a wood stock. Is that so much to ask?

[@user-fl4wn9dn2c]

The streamlight TLR-7 works great on it

[@PointWithin]

Great vid. What model bipod is that?

[@GunsumerReports]

arealmansreviews.blogspot.com/2010/04/leapers-utg-tactical-op-1-bipod-review.html

[@mathewrupp8568]

I surprised that it weighs almost seven pounds. My M1 carbine weighs just over five pounds and is more powerful. I would of thought the PC would weigh similar to my carbine.

[@johnklimas1487]

The worst part of the PC are the sights. They are junk. At 90 yards I can hit a 14" x 17" , all day, with factory sights.

[@SomeplaceWonderful]

A really detailed look and really appreciated. I'm looking forward to hearing how consistent (or inconsistent) the accuracy will be with a receiver mounted optic and removable barrel. That is my biggest concern and the reason I wish Ruger offered a version like this: www.flickr.com/photos/mick_davies/40325046241/in/dateposted/

[@sumosupremeking360]

Thank you for the in-depth review of this weapon I really learned a lot

[@donkeydonk96]

100

[@dexstoy]

Thank You for the detail you have put into the reviews of this firearm. YUP, I'm still getting one too!

[@GunsumerReports]

Thanks for the feedback. I will be doing some range testing this weekend. So far I love it.