After using the Ruggedmade 28T Splitter for a couple weeks, I gave a thorough review and made the following modifications that you will want to see!!
Пікірлер: 10
@NicolasPoirier2 ай бұрын
I know exactly what you're talking about with respect to the retract detent not kicking out 100 percent. As of right now, mine does it too. It's frustrating. The detent pressure seems to be appropriate, so the only way i can see to possibly fix it is to lessen the detent pressure lower than you really want it so the the 'inertia' of the level breaking out of the detent carries the lever ALL the way forward. The other thing that crossed my mind is to remove the spool and refine and re shape the actually deformation in the spool shaft that is being caught by the ball bearing detent. Great video, nice job making it your own.
@vichansen74148 ай бұрын
The detent on that valve is adjustable. It’s the adjustment at right angle to the spool, loosen the lock nut turn the outer adjusting nut out 1/2 to 3/4 of a turn (looser). Try that it fixed mine.
@mattnicol88829 ай бұрын
Thanks for the review. I'm considering this model, i think the modifications you made to the hitch-connection end are perfect! For that valve issue,,, in not certain if this will fix it, but RuggedMade has a video on their channel about adjusting the detent for the return on the valve. Might be what could help you
@BrigT2629 ай бұрын
Thanks for pointing that out. About a week after I posted this video, I contacted Ruggedmade and they emailed me that video link for the detent adjustment as well as to let me know that the Honda engines just came in!! Ha ha. Their adjustment procedure totally fixed the poblem. The detent spring was way too tight by about two full turns! Also, as I pointed out, the raven is actually a great engine. These guys are a really great company to work with. I highly recommend their products. The log lifter is amazing! Will lift as much as you pile on with ease!
@brackenprofaizer26019 ай бұрын
I have the 37 ton one and I did some modifications to mine as well I use my tractor to move mine so I put a removable pintail hitch on it so when you remove it no one wacks there legs on the hitch and use the 3 point to lift and move so I didn’t put a jack on mine. Thanks for the video
@user-ck6ni2uw1d5 ай бұрын
mine is 3 years old been thru 3 sets of valves rugged made warranty is great people are great at getting parts out just wish i didnt need them . has leaked hyd oil since day one log craddle you took off has been bent clear back to craddle engine has been great log lift gets bent up needs a angle iron welded on next to beam to avoid this hyd oil filter housing was replaced but still has filter vibrate. loose love the speed and power needs engineered better beam log lift and craddle need to be same height so moving peices back to be resplit is easier tounge weight can be adjusted by moving the tire forward your modes are great for the money not a bad machine but could be better just ordered a vertical with elevater from wolfe ridge cant wait to get it and speed up my production
@Lakecenterlawncare7 ай бұрын
You can adjust the detent for the return valve.
@garyvoigt50909 ай бұрын
All good points but the pinch point is that you should always keep your hands on top of the wood and not by your side..
@BrigT2629 ай бұрын
I've use my old straight beam Northern splitter for over 20yrs. I guess I just got very used to holding the logs on the side at times when needed. It just worked better for me to remove that bracket. Totally not needed!