Runcam Thumb Mobula7 ELRS test (WHATCH IN 4K!)

[@launchfpv7144]

Wow awesome flying! The thumb is definitely a great camera in the under $80 range and I am looking forward seeing more! Love your videos!

[@ludofevrier5593]

Wow nice video quality 👌🏼🚀😍

[@joaoejapa]

its can be used to film some video parts, or some videoclips

[@TERBANGFPV]

Nice lil flier my friend.. great setup with tumb

[@winder6]

Wow that was impressive didn't really give the Thumb much thought until this very cool thanks for sharing

[@LeshaRodin]

Its not great, not terrible :D Go2/Peanut much better, but much heavier too.

[@winder6]

@@LeshaRodin I think you have shown it to be ok for whoops and on a cell phone it looks way better than analog and nice piloting in that sketchy area. Cheers

[@bugsy742]

Same mate 👍

[@TuxedoFPV]

Can you share how you mounted it? I'm also trying to get a naked version mounted on a whoop with minimal vibration. Any tips?

[@LeshaRodin]

Hi, it just mounted on a ziptie. Under the camera I use a little bit of jello tape (idk how its called, like multiuse thick silicone tape)

[@grindz145]

Looks so sick!

[@housinit]

Great camera for the price! Pleasantly surprised by the footage it can produce.

[@TheCivildecay]

wow nice! could you make a video on how you mounted the thumb to the mobula7?

[@LeshaRodin]

Dm me on telegram @lesharodin

[@MDanilo]

Nice flying! Do you have some issues with the added weight? Prop wash?

[@LeshaRodin]

It cant catch himself after dives etc.. So just cinewhoop stile flying, without tricks

[@on1ytheb3st]

Would you say with the added weight it has lost a considerable amount of top speed? Could you compensate for some of that lost speed by adding more pitch?

[@LeshaRodin]

I dont think it loose speed. Its heavy and have inertia with camera on top, so It have speed.

[@lalatubby4836]

got my thumb yesterday too 😁

[@diemfpv]

Hello, great vid. How did u connect Thumb to Mobula? Direct to +5v on FC?

[@LeshaRodin]

Yes, but from FC BEC its usable only to ~3.6v. If you want to fly to 3.2v you need external 5v buck-boost

[@diemfpv]

@@LeshaRodin thanx, any recomendations for super small step-up module?:D

[@LeshaRodin]

@@diemfpv pololu brand if you can find one

[@diemfpv]

@@LeshaRodin yeah, started searching for pololu, quite expensive but that will do

[@unknw51]

@@LeshaRodin Hello friend, what is the BEC module you are using? Can we fly with 1s battery?

[@deadduck8643]

Крутяк а сколько по времени может лететь?

[@squaddingquads]

How on earth have you got such smooth footage from the thumb?

[@LeshaRodin]

What do you mean?

[@shadowfranky]

gyroflow

[@squaddingquads]

I tried gyro flow and it made my thumb footage much worse

[@shadowfranky]

@@squaddingquads you used it wrong, set the smoothing like REALLY low like 0.01/0.02 and that fixed it for me

[@shadowfranky]

@@squaddingquads also make sure to use the runcam thumb lens preset and sync the gyro at the top right

[@vanceagher]

What is the rubber stuff that you put around the camera?

[@LeshaRodin]

Heatshrink

[@ILLBEDRONED]

Looks great!!

[@sergiosanchez8222]

Do you happen to know what the flight time was and what capacity battery you were running? I was hoping to get a mobula7 and run cam thumb as well. Also, have you tried using gyro flow at all with this drone and camera.

[@LeshaRodin]

Hi, 3-4mins with thumb on gnb550. Without thumb its 4-5 maybe. This video is stablized with gyroflow

[@picvan]

@@LeshaRodin Thanks for replying I was going to ask the same. Looking for a decent indoor flyer with the thumb cam

[@КаналКаналыч-т1у]

@@LeshaRodin do you use bluejay 48khz?

[@LeshaRodin]

@@КаналКаналыч-т1у Да

[@kaelfpv7875]

Nice flying good flow keep it up👍😎🆕Sub

[@LeshaRodin]

Thank you

[@RezchikovOleg]

Это Мобула 7 так летает? Штатная или с переделками?

[@LeshaRodin]

Конкретно на этом видео штатная

[@RezchikovOleg]

@@LeshaRodin Вот не думал, что оно способно ТАК летать на воздухе

[@AlexLebed]

nice, however it seems comparable with runcam nano split-3

[@UnbiasOP]

How do you power the thumb on a 1s battery???

[@LeshaRodin]

From FC 5v pad, but its flyable to 3.6v. Recently I added external 5v booster to fly whole battery

[@UnbiasOP]

@@LeshaRodin Thanks for the answer, friend. I didn't realize the Mobula7 had a 5v pad.

[@ravib.p5635]

@@LeshaRodin where did u connect 5v booster to? Today my fpv feed blacked out at 3.6v :( what's the solution to fly the whole 1s pack?

[@LeshaRodin]

@@ravib.p5635 from vbat pads to booster to camera

[@pavelfpv9143]

Привет! Тоже использую эту камеру, но никак не могу отстабилизировать видео в gyroflow. На выходе остается тряска, убирает только дисторсию 🙁

[@LeshaRodin]

Там есть свои приколы по работе с гирофлоу, надо накинуть лоупас фильтр обязательно, также занулить гиру на таймлайне, в момент когда коптер стоит на месте. И ещё следить чтобы точки синхронизации имели линейный сдвиг типо первая -100 вторая -200 и тд, если меж ними странное выбивающиеся число лучше эту точку ужалить. Ну и точек надо штук 10 например.

[@Azgorsky]

Обычный thumb, не про? Как поставить нд фильтр на разобранный thumb?

[@LeshaRodin]

Это был обычный ещё, сейчас уже про, видео есть тоже на канале. ND на обычный не ставил, на про разобранный через печатный переходник ставлю

[@aleksandrtolstoi4791]

Здравствуйте! Так она же 5v,камера?как на 1s она работает?

[@LeshaRodin]

Так на полетнике BEC 5V который повышает и выдает стабильные 5v.

[@aleksandrtolstoi4791]

@@LeshaRodin, там x12?

[@LeshaRodin]

@@aleksandrtolstoi4791 да, но это есть на любом полетнике

[@aleksandrtolstoi4791]

@@LeshaRodin, спасибо!

[@끊임없는에단]

👍👍👍👍💜

[@onmyway6727]

Ясенево?)

[@LeshaRodin]

да

[@arisusanto7453]

hi mate, what filter are you using?

[@LeshaRodin]

Hi, go2 filters

[@arisusanto7453]

does it need glue buddy ??

[@LeshaRodin]

@@arisusanto7453 fits without it, but some glue will help to keep it more tight.

[@arisusanto7453]

Ok buddy, thanks .. keep creating beautiful and educational content

[@joaoejapa]

man be carrefull to fly near water, i dropped my mobula 7 on my dogs water jug and my mother rushed and managed to take the drone out of water while the battery stills plugged in the mobula 7 just started to make a huge amount of smoke and get super hot, i mannaged to take the battery off and the smoke and the heat stoped, rip mb7

[@LeshaRodin]

I have my FC conformal coated, and flying near water is fun and risky :D

[@elxero2189]

heat is that lens in the thumbnail lol oh and filter okah

[@LeshaRodin]

This is ND filter from go2 glued to adapter, made from plastic cap of caddx ant

[@investcapital]

Ясенево, 3 пруда))))

[@eastbound535]

my camera has terrible jello and jitter with other cameras is no jello

[@LeshaRodin]

Its have a lot Jello on sunny day.

[@eastbound535]

@@LeshaRodin so you saying your video doesn't look so jellosh because is no sun?

[@LeshaRodin]

@@eastbound535 exactly, read about rolling shutter. When shutter speed is fast we have jello, when it slow we doesn't. Thats why we need ND filters, but for sunny day we need nd64.

[@WindjumbieFPV]

Looks great 🤙🏼 #islandfpv🌴 subbed

[@dragonclawfpv]

как тебе понравилась эта лужа под деревом)

[@42alastor79]

Хах, куру норм проводил

[@k.A.t.U.n.]

Как ее запитать? Надо 2 1s аккума: 1 для мобулы, 2 для камеры?

[@LeshaRodin]

Можно от 5v пятака на полетнике, но лучше внешнюю повышайку повесить. Акум 2й конечно же не нужен.

[@k.A.t.U.n.]

@@LeshaRodin припаяла провода, камера работает/ только мобула 7 1s с ней не взлетает на аккуме gaonen 1s 660mAh (90c\180c)/ я сняла с камеры только задние крышки. Надо полностью раздетую версию, чтобы летать как у вас в видео?

[@LeshaRodin]

@@k.A.t.U.n. должно хватать ей тяги, ну попробуйте полностью раздеть. Я потом на 1002 моторы перешёл чтобы легко летало