Long knife made from a Chainsaw Bar

[@СергейЕлин-р5с]

Excellent tool for bushcraft. Excellent work done. Thank you author for the video

[@RustisGold]

Thank you very much for your comments! I am glad you liked it! 😊👍

[@enriquemartinezcano2063]

Good work, congratulations!

[@RustisGold]

Thank you very much!! 😊🙏

[@COWASOGGY]

Very nice. The only thing that sucks about working with chainsaw bars is the gap where the chain sits

[@RustisGold]

So true!! 😊👍

[@reececahoon6718]

I'm just starting to learn to do this kind of stuff, I've been making things out of chainsaw bars as it's easy metal to work with , but I was under the impression you have to heat treat the steel? as it's quite soft.

[@RustisGold]

To be honest I was just experimenting!! 😊👍

[@PROSTO4Tabal]

The same procedure can be use to make a sword out of leaf spring. This steel is resilient and durable. Thanks for sharing Edit: Greetings from Poland

[@RustisGold]

Thank you very much!! Glad you liked it! Yes, I want to do something with a leaf spring one day! Greetings from Greece!! 🇬🇷😊👍

[@jamesburriss1086]

How do you straighten the spring?

[@426superbee4]

I never thought of that one ! Sweet

[@RustisGold]

Thank you!! 😊👍

[@restorecreate]

I think it's time for hunting in the jungle Mike,well done my friend !

[@RustisGold]

Haha!! Let's make some more and hit the jungle!! 😄

[@Oo1-T]

Amazing‼️very nice sensor bar✅👍

[@RustisGold]

Thank you very much! 😊👍

[@ricardomalsenido8504]

Sobresaliente trabajo desde Argentina lo felicito soy Ricardo

[@RustisGold]

¡Muchas gracias por tus comentarios! ¡Saludos desde Grecia! 🇬🇷😊👍

[@florindopaulo6207]

Revi de novo................tem ...talento

[@RustisGold]

Muito obrigado!! 😊👍

[@imatreeguy1143]

How thin did you grind it down to? I'm making a tanto one and the tip delaminated after a few super hard throws into a log

[@gregmundo6107]

Excellent job

[@RustisGold]

Thank you very much! 😊👍

[@stephengurd788]

Nice one mike shell have a go at this 👍😁👍

[@RustisGold]

Thank you very much!!!

[@tonywyant8957]

Ive tried drilling into my bar and the drill bits don't come close to even marking the bar. My bars seem to be very hardened. Any tips on what I can do

[@RustisGold]

I am using cobalt drills...

[@thetoytaco99]

How's the edge hold up without any heat treatment

[@RustisGold]

Unexpectedly good! Since it was not heat treated I didn't think it will last long...

[@dmitrydmitry6531]

the handle is thick in my opinion .... I would have made it thinner for myself. The "holok" blade is excellent! Yes, it was not necessary to drill additional holes. In the center there is an oval cavity in the metal, it is in it that you can glue wood to wood. I saw such a solution at the knife exhibition (handles without rivets) Especially since you glue on epoxy glue.

[@RustisGold]

Thank you very much for your comments! It's true... The handle is a little thicker from what I wanted to be.

[@florindopaulo6207]

Execelent...........maquinario

[@RustisGold]

Thank you!! 😊👍👍

[@soulis1000]

Nice one!

[@RustisGold]

Thank you very much!! 😊👍

[@aliosmanaydogan2501]

Merhaba mükemmel bir iş çıkardın sanatkâr böyle olur ellerini sağlık güzel oldu

[@RustisGold]

Yorumlarınız için çok teşekkür ederiz! Yaratımımı beğendiğine sevindim! İyi günler! 😊👍👍

[@EmArSinota]

Why no heat treatment ?

[@RustisGold]

I was just experimenting to see how it would turn out.

[@TheMightyGoat]

Isn't a chainsaw bar already hardened? Wouldn't be difficult to drill otherwise. If it's hardened and you don't overheat it with the grinder then it doesn't need to be hardened again.

[@freefree9221]

Шина склепана из двух полос и проставки. Клепки не рассчитаны на ударные нагрузки и очень быстро развалится и получим херню полную. Одним словом человек снял ролик для контента, практическая часть херовая

[@RustisGold]

Мой друг, по той причине, по которой я его использую, для резки небольших кусков дерева, он отлично работает. 😊👍

[@РомаКравченко-м7г]

Как не используй а нож из трех склепанных полос

[@uzb..7456]

Привет я разобрал он на 3 куски разбираются,на контактом сварке ,он из 3 листа ,образуются полотно,это не работа ,лучше разобрать ,там 3 штуки ,и по одному можно но будет для только теста на кондитерский работе пригодиться

[@вадимдедюля]

Когда собаке нечего делать, она яйца лижет! Здесь тоже самое!

[@martinlong2804]

Love your little clamps

[@RustisGold]

😊😊👍👍

[@totokkris4110]

no heat treatment??

[@RustisGold]

I was just experimenting... It looks to hold well. 😊👍

[@ItsmeAlexCrete]

amazing!! Τέλειο!! παω να ξυλώσω την λαμα!

[@RustisGold]

Χαχαχα!!! Καλύτερα να πας σε ένα κατάστημα που κάνει σέρβις σε αγροτικά μηχανήματα και να πάρεις μερικές χαλασμένες λάμες! Κρίμα να χαραμίσεις την καινούργια λάμα! 😄👍👍

[@ItsmeAlexCrete]

@@RustisGold σωστά!!

[@sebastiaofernandesdasilvas1105]

Você vende este este produto

[@RustisGold]

Não, eu não vendo... Eu só posto meus projetos DIY no meu canal do KZbin...

[@esiamirbeygi1815]

خیلی عالی لذت میبرم

[@RustisGold]

از نظرات شما بسیار متشکرم!! سلام به ایران زیبا از یونان !! 🇬🇷😊👍

[@yunilawahyu8747]

is that machete in the heat treatment ?

[@RustisGold]

No it is not...

[@yunilawahyu8747]

@@RustisGold Have you tried slashing hard wood and is it still sharp? THX

[@RustisGold]

I have tried with hard wood... It is still quite sharp. 😊👍

[@yunilawahyu8747]

@@RustisGold

[@salamaleykum8233]

Надеюсь он в курсе что шины от бензопил из 3 слоёв листов металла, склёпанных вместе)))))))

[@RustisGold]

Да, я знаю, я просто использую его, чтобы нарезать небольшие куски дерева для своей дровяной печи. Работает нормально... 😊👍

[@salamaleykum8233]

@@RustisGold 😉

[@salamaleykum8233]

@RADIONOIϟE не у всех, есть разные

[@РостиславШафар]

А з якої пили цей шин конкретно

[@RustisGold]

???

[@ВЕЧНЫЙОТОРТЕН]

от старых дружб.сколько валяются и не ржавеют.

[@DominikChmiel-mp8ch]

Czy nie rozwarstwi się , można było odzielicz blaszki

[@RustisGold]

😊👍

[@Gold-Gem-Tv]

Ja zrobiłem dwie z jednej prowadnicy ale obie się połamały

[@DominikChmiel-mp8ch]

@@Gold-Gem-Tv co ciales?

[@Gold-Gem-Tv]

@@DominikChmiel-mp8ch drewno i obie przy rączce pękły

[@николаймаксимоваткарск]

зачем столько клепок?

[@florindopaulo6207]

Aaaaa e machines ..........boas........tnm

[@RustisGold]

😊👍

[@GioNat78]

Nα κατι τετοια κανεις φιλε μου και θα αφησω το αλυσοπριονο χωρις λαμα!!!Καταπληκτικη δουλεια και ετοιμος για τον Αμαζονιο!!!

[@RustisGold]

Χαχαχα!! Κράτα τις παλιές λάμες! Μην τις πετάς!! 😄👍👍

[@GioNat78]

@@RustisGold Εννοειται...συλλογη απο μασετες θα κανω!!

[@RustisGold]

Και εγώ κατά τύχη τις είχα κρατήσει! Είχε χαλάσει μπροστά αυτή η ροδέλα/γρανάζι και ευτυχώς δεν τις πέταξα! 😊👍

[@beastmode2990]

Μάγκα μου με έφτιαξες έχω μια παλιά που βρήκα και σήμερα έλεγα να την κάνω κάτι thanks για την ιδέα πριν λίγο τελείωσα ένα μπαλτά

[@RustisGold]

@@beastmode2990 😄😄😄 να είσαι καλά!! 👍👍👍

[@ВиталийРадзиховский-з6у]

👍👍

[@RustisGold]

😊👍

[@domichim8980]

Nie puszczą nity?

[@ВладимирДема-г5ю]

Хлам метал очень мягкий зря время потратил диз ...

[@suchkakrashena7234]

Супер а я здавав в чермет

[@RustisGold]

😊👍👍

[@user-simonbolivar]

Это у тебя получилась уродливая заточка, годная разве что бурьян рубить на огороде. 😊😊😊😊😊😊😊

[@RustisGold]

Ты такой забавный! 😄😄

[@valentynkostyna8364]

Ненависніше московита- нема в світі!!! Якщо кацап обгидив- значить вірно робите. Не звертайте уваги. Українець- говорить. Нам видніше!!!

[@vasiayaroshevskiy2500]

Пускай там и весит.

[@cristianbeckbissinger4980]

?

[@RustisGold]

?

[@parvindergill4415]

Why no heat treatment?

[@RustisGold]

I was just experimenting... It is true that with heat treatment it would be better.

[@parvindergill4415]

@@RustisGold you made it look so simple and easy to make

[@RustisGold]

It is true that it was an easy project! Next time I need to make a heat treated machete! 😊👍