Rusty Chisel Restoration - Grandpa's Toolbox

[@ICU2B4UDO]

Grandpa would be proud! 👏

[@TechnicsFR]

Thank you, Gabriel!🙏

[@ICU2B4UDO]

@@TechnicsFR You're very welcome...

[@josepcb2882]

Felicidades una restauración perfecta. Saludos desde Barcelona Catalonia

[@TechnicsFR]

Thank you, Josep!

[@Jumanji2395]

Was it me or was that relaxing to watch

[@TechnicsFR]

I'm glad to hear that! :)

[@brianfitzsimmons2296]

Brilliant job

[@TechnicsFR]

Thank you, Brian!🙏

[@arturoaaguilarperez1200]

Well done. Thanks.

[@TechnicsFR]

Thank you, Arturo!😉

[@АндрейНикитенко-ф4с]

Excellent work even to the most captious eye.

[@TechnicsFR]

Thank you😁

[@scharferschnitt1071]

what a great result. loved watching it

[@TechnicsFR]

Thank you, Scharfer!🙏

[@larannar123]

I like the patina on the blade,it tells its history...

[@TechnicsFR]

🙏

[@marcejolye1394]

Bine lucrat!! Felicitări!!

[@TechnicsFR]

Mulțumesc 🤗

[@douglasgaither1346]

Well done!

[@TechnicsFR]

Thank you Douglas!

[@Mittnamnarupptaget]

Definitely mirror polished.

[@TechnicsFR]

;)

[@CoolAgainRestoration]

Nice outcome 👌

[@TechnicsFR]

Thank you, Colega!😉🙏

[@RestorationAustralia]

Well saved, looks great.

[@TechnicsFR]

Thanks :)

[@valterleao2798]

PARABÉNS amigo…, eu valorizo muito as ferramentas, elas não ficam velhas e sim mais experiente e amorosa com a gente, nos identificamos com elas, foi muito justo seu trabalho! ❤️👍❤️ Abraço aqui do Brasil 🇧🇷

[@TechnicsFR]

Obrigado pelo feedback, Valter :)

[@fishingforparis]

Great job. It turned out better than I thought it would.

[@TechnicsFR]

Thank you, Richard 🙏

[@vinodpatel7622]

Nice job fone

[@RESTORATIONOFSCRAPMETAL]

Beautiful result 👍

[@TechnicsFR]

🙏

[@mikebetts5532]

looks great, well done….⛏️🛠️🔨⚒️🔩🔧👏👍🍻

[@skepticjoe]

Nice job. 👊🏼👊🏼👍🏼

[@TechnicsFR]

Thank you🙏

[@nuassul]

Wooooow great job and excellent restoration 10/10*

[@TechnicsFR]

Thank you! :)

[@rustrestoration1469]

Nice restoration ;)

[@TechnicsFR]

Thank you! :)

[@antoniocosmealves7937]

Boa Tarde Amigo ! Ficou Bom...Mais Eu Prefiro Que A Lâmina Fique Brilhando ! Forte Abraço ! Saudações Brasileiras ! Cosme - São Paulo - Brasil

[@TechnicsFR]

Saudações, António! Você é o primeiro a responder minha pergunta! Obrigado pelo feedback! :)

[@ВадимКузнецов-з2й]

Молодец ретромастер!-, отличная получилась работа!-, теперь этой стамеской нельзя работать!-, теперь ей место в музее!!!

[@TechnicsFR]

Я работаю в строительной сфере и уже почти год работаю с этим зубилом, в основном использую его, когда нужно установить дверные ручки! Все еще режем ;)

[@ВадимКузнецов-з2й]

@@TechnicsFR молодец парень!-, я сам когда-то работал на строительном производстве, сейчас давно на пенсии, занимаюсь плетением корзин и пестерей, здоровья тебе и удачи во всём 🛠️⚙️🔩🔗🦾🤝👈🇷🇺🤓!!!

[@TechnicsFR]

@@ВадимКузнецов-з2й Спасибо, желаю спокойной пенсии и успехов в работе! :)

[@ВадимКузнецов-з2й]

@@TechnicsFR спасибо за пожелание!, будь здоров 💪👍🤓🤝!!!

[@rairai3517]

NICE.......

[@TechnicsFR]

Thanks🙏

[@peterbeley3067]

I enjoyed watching this video good job

[@TechnicsFR]

Thank you, Peter!🙏

[@CogentConsult]

Nice job!

[@TechnicsFR]

Thank you, Rich :)

[@mariaassante620]

Great restoration. Use it well

[@TechnicsFR]

Thank you, Maria!🙏 I would😉

[@elizabethkizzar5489]

Looking at that handle I don't know if I would be more concerned about the splinters or the spiders.

[@TechnicsFR]

Both of.. :))

[@GT_Racer347]

I like it. 👌😍

[@TechnicsFR]

Thank you :)

[@moonlightsnowfall6734]

That came out great, good video. Thanks!

[@TechnicsFR]

Thank you!🙏

[@tjschrod]

Great result, love the handle. Nice job man

[@TechnicsFR]

Thank you, Tyson! :)

[@ademarcascante8142]

Que lindo trabajan

[@TechnicsFR]

Gracias, Ademar!

[@73Marlen]

Браво !!!

[@TechnicsFR]

Спасибо, Мarlen! :)

[@73Marlen]

@@TechnicsFR твой труд вызывает восхищение и уважение!

[@GarageRestoration]

O treaba buna , personal as fii lustruit partea metalica pana era oglinda :)

[@TechnicsFR]

Mulțumesc!Da, ar fi mers lustruit bine😁

[@吾郎山田]

good job

[@TechnicsFR]

Thank you! :)

[@alveanjones4524]

It's a great restoration! Loved what you did with it. The handle is very nice.

[@TechnicsFR]

Thank you, Alvean!🙏

[@zangarretson4536]

Awesome. Alot of people probably don't realize this is a wood chisel ment to be struck with a wooden mallet. Loved it! Great restoration.

[@TechnicsFR]

You are right! Thank you for your feedback! :)

[@teacheme]

Nice job. Great work on the handle. I think that in this case a mirror finish would look better especially as the cutting bevel is almost a mirror and makes the rest of the chisel look shabby and unfinished.

[@TechnicsFR]

Ok, Costa!😉 Thank you for your feedback 🙏

[@forest487]

Cis old white men always have an opinion nobody wants to hear, yet they will tell you it regardless.

[@jakubthedanger8158]

Great job! But won´t heating change the tempering properties? What if you just bang it with hammer?

[@TechnicsFR]

Thank you, Jakub! Yes it can but it doesn't affect very much in that area, on the tip it may be a real problem. I have use it for a year since then and yet no need for resharpening ;)

[@youtubiefun]

dope

[@subramanianiyer2731]

Amazing job. Beautiful to look.

[@TechnicsFR]

Thank you!🙏

[@kirkmulhearn7931]

Very tight! Excellently crafted, like how you demonstrated the tool at the end

[@TechnicsFR]

Thank you, Kirk!🙏

[@ismaeelryklief131]

Really good restoration 👍 👌

[@TechnicsFR]

Thank you🙏

[@electronixTech]

Clever ideas on how you made the brass ferrules and handle. The completed project turned out nice. New subscriber.

[@TechnicsFR]

Thank you for your feedback! :)

[@electronixTech]

@@TechnicsFR Thanks I look forward to watching more of your videos.

[@goodvibescommunity5898]

Amazing restoration like always😍👏👏

[@TechnicsFR]

Thank you🙏😁

[@jonathonworner360]

Trying to save that handle will just get you a handful of splinters. Just carve up a new one on the lathe

[@TechnicsFR]

Exactly😅

[@Dx20xygen7]

I really like the finish you gave to the chisel itself, although personally I'm not sure about the handle, the rear part doesn't look organic and I think it would've been more comfortable to grip if the handle was smaller Thank you my dude, good job

[@TechnicsFR]

I want to use the hammer too, that s why I make it a bit big. Thank you for your feedback 🙏

[@Geerah]

I like how you called the collar the necklace, probably a mistranslation, but I like to think you wanted the chisel to be the fanciest and prettiest chisel it could be.

[@TechnicsFR]

So I see that "necklace" is only for brides, or any special occasions, sorry.. my bad 😅

[@Geerah]

@@TechnicsFR Necklace is jewelry, so anything worn around the neck for decoration. And your translation was no problem, we all understood what you meant :)

[@TechnicsFR]

Ok😅

[@jdavidkatz]

It doesn't look like you flattened the back or honed the bevel edge. Did you do this off-camera? Did you use water stones, diamond stones, or ceramics, or some other method?

[@TechnicsFR]

Hi, David! I flattened the back of the blade right after the sharpenning, I didn't honed the bevel edge due the fact that I chose not to make it mirror polished!😉

[@rominacernautan2191]

👏👏👏👏👏

[@paulbejan3209]

Good job like always!! 👏🏻👏🏻

[@TechnicsFR]

Thank you, Paul!🙏

[@4acrefield875]

Great job and excellent result with small number of tool used. Any kind of metal lathe restoration would be great and it would prove a very useful tool in you shop. No sure how expensive or available there are in your country. Keep up the good work

[@TechnicsFR]

A metal lathe would be really useful, but I'm not ready right now for this acquisition. It is in my plan till the end of this year. Thank you for your feedback :)

[@gggttt3882]

C hướng dẫn e và mn bài Một năm mới bình an- Sơn Tùng M-TP đi ạ. Mong c ra vid để e còn tập kịp ạ😅 !!!!

[@TechnicsFR]

Tôi cố gắng tạo ra những video hay nhất có thể :))

[@whitefox9]

How did your grandpa damage a chisel like that What did he use it for?????

[@TechnicsFR]

I only saw him using this chisel once, at a door, but I don't remember if it was bent at that moment..

[@michaelgbo]

Looks like you got the polarity of the electrolysis wrong. The rebar is clean at the end…

[@TechnicsFR]

Nope, negative on the object, pozitive on the rebar! Maybe because there wasn't so much rust😉

[@gayle525]

No mirror polish, looks better if you show the age.

[@TechnicsFR]

Thank you for your feedback! :)

[@alfonsomunoz4424]

"I'll fix the bent part" I've seen commercials on TV during the news that advertise a drug for that.

[@TechnicsFR]

So tell them to send me a check :))

[@loyeantleyjr.8646]

😁🥰😁

[@nairamikaelyan1934]

1978 year

[@chrisbarley9584]

Polish finish would’ve been better

[@TechnicsFR]

Thank you for your feedback, Chris! :)

[@crouchie-03]

Try not to wear gloves while using the drill, really unsafe 😨👍

[@TechnicsFR]

The almost broke😅

[@crouchie-03]

@@TechnicsFR that was lucky then😅😮‍💨

[@Викторкурлов-ш3м]

я такой тупости ещё не видел ручку разбирает как автомат Калашникова\ КАШМАР\

[@TechnicsFR]

У всего есть начало :)

[@АлександрШведчиков-щ1б]

Отвратительная работа. И только одна причина этого - автор ничего не знает о свойствах металла и о ручных инструментах. Получилась жалкая пародия даже на косметическую реставрацию... Дизлайк.

[@TechnicsFR]

Спасибо за ваш отзыв :)

[@sascha5668]

Typischer Amateur. Stahl heiß gemacht und die härte zerstört und anschließend nich mal mehr gehärtet. Wird nicht lange dauern und das Teil verbiegt wieder.

[@TechnicsFR]

Ich werde es wieder reparieren ;)

[@wolfgangbalu1253]

You are copymaker in all your behavior from very sucessful chanels

[@TechnicsFR]

That's good! :)

[@Dx20xygen7]

He doesn't steal any content. Just uses conventional approaches to renew some tools. I don't see anything bad in this. It's not always about being super innovative or making unique pristine designs.

[@andyf.724]

Ist doch normal, trotzdem finde Ich bringt er genug eigenständiges! die Qualität überzeugt doch! Man muss und kann das Rad nicht immer neu erfinden! Ansonsten besser machen ^^

[@wolfgangbalu1253]

@@andyf.724 Das er was kann, ausser Frage.Aber die Einstellungen der Kamera, der Arbeitstisch, die Handschuhe, das Vor- und Nachher, kopiert von MyMechanics. Da fehlen ihm noch ein paar Einfälle

[@andyf.724]

@@wolfgangbalu1253 ..ja ich gebe Dir recht das er noch nicht seinen eigenen Stil gefunden hat! Aber mit ein wenig Zeit und Selbstvertrauen hat Er wirklich die Chance sehr gut zu werden! Das Talent ist ja da ...alles andere kommt mit der Zeit würde Ich sagen :-)