Rusty Vise Restoration

I got this rusty vise from a metal junk dealer a couple years ago. It was in pretty bad shape with deep marks and all that rust on it.
Unfortunately I couldn't find time to restore it for a while. Finally the time has come for it to become a new vise.
I hope you enjoy this rusty vise restoration video.
Thanks for watching, please like and subscribe more videos are coming.
00:00 Introduction
00:40 Starting To Dismantle
04:22 Ready For Restoration
05:03 Cleaning With Degreaser
05:37 Paint Removing Process
05:49 Rust Removing Process
06:35 Wire Brush Process
07:20 Welding
08:17 Milling Machine
08:45 Setting Jaws Width
09:54 Polyester Putty
10:29 Sanding
11:06 Masking for Paint
11:36 Painting
13:47 Lathe - Making A New Handle
14:14 Adjustment Of The Main Screw
14:37 Lathe - Making A New Washer
14:57 Ready For Assembly

[@murattopcuu]

Amazing work✌️

[@guilty_rover191]

واقعا بی‌نقص👌 ادم لذت میبرد از نحوه کار کردن شما . خوش بحال شما که از تجهیزات بسیار کاملی و خوبی برخوزدار هستید ، از نظر یک ادم فنی که عاشق یر و کار داشتن با کارهایی مثل شما هست و علایق یکسان کاری مثل هم داریم واقعا میتونم بگم که ادم دلش میخاد که جای شما باشه . و مثل شما بتونه از همچین زندگی‌ای انجام بده 🫶 براتون ارزوی بهترین ها رو میکنم 🌹

[@peterstevens6555]

Kia Ora & Good Afternoon from Unsworth Heights, North Shore, Auckland, New Zealand …Great Video Bro …

[@restorationmania]

Thanks a lot 🙏🏻

[@RestorationAustralia]

Nice job.😊

[@GT_Racer347]

Love a good vise restoration video!

[@restorationmania]

Thanks a lot 😊

[@yigitsulaoglu2110]

Fantastic 👌

[@zeynepbasrali259]

Perfect 👍🏻

[@user-wm4dz5fw9d]

Very nice. I subbed.

[@restorationmania]

Thanks a lot, I appreciate that 🙏🏻

[@teejay3426]

Those bolts/nuts on the swivel base that were cut and replaced should have been miniature sliding bar bolts, like the vise handle.for easy tool less positioning and locking down of the vise. Came out very nice!

[@restorationmania]

You are totally right, thank you very much

[@patjohnson3100]

Very good restoration of a badly abused vise. It would be interesting to see how you straightened the main screw. Your vise looks much better now, and will work better in the shop.

[@restorationmania]

Thank you very much your kind comment ☺️ I totally forgot to add that part so I uploaded it as KZbin shorts video. You can watch the process here: kzbin.info5Mm3_2QZ_Bw?feature=share

[@eymen74]

Çok güzel bir restorasyon yenileme videosu olmuş.bu şekilde güzel içeriklerini bekliyoruz abi.🧿🧿

[@turkanhepgur2522]

Congratulations 👏

[@zozoartstudio4727]

Very clean!

[@pickletreewoodcraft7858]

Someone must have really hated that vise lol. I think you’ll appreciate it much more😊

[@restorationmania]

Lol 🤣 yeah it was in really bad shape when I got it. I will appreciate it for sure. Thanks for watching and for this nice comment.. have a great one ✋🏻

[@erdogancukuryurt2867]

Çok başarılı bir çalışma, tebrikler.

[@oyasatiroglu9331]

Bravo şiir gibi 👍🏼👏👏👏👏

[@ismailgokce3971]

Harika olmuş

[@muammerozpehlivan813]

Tebrikler cok iyi

[@Onepiecenewmanga]

mükenmel olmuş mengene eline saglık👍👍👍

[@irfanbasral163]

Süper👏👏👏👏

[@tolgatavsanci5224]

💯💯💯

[@saoralba5114]

When losening bolts just flip the shifter same with tightening , your pressure is on the screw feed .

[@restorationmania]

I also tried that but it didn't work, tried many things just didn't put it in the video. Thanks you very much for you advise, it means a lot to me.

[@dumpsterfire6351]

Ahhhhh shoulda named it No markings Maybe “bboyblue”

[@restorationmania]

That sounds cool 😎 Thanks for the advice 👍🏻

[@atamotoktmyetkiliservisi5549]

If you have socket set why would you bother using adjustable wrench? You got us both tired 😄 but I happy with finish. I will sleep well.

[@restorationmania]

Totally right, I didn't have the correct socket, will get one. Thanks 👍🏻

[@nelsonsilvera8013]

Hubiera quedado 100 por ciento si tuviera mordazas cambiables

[@restorationmania]

You are right, I wish the jaws were changeable, thanks for your comment.

[@alpurasg]

🗜️🐍

[@pauloneill8912]

not great

[@restorationmania]

Ok

[@tomnorman5461]

How did you straighten the main (ACME) screw? What is that additional piece next to the ACME nut used for? Something other than a regular nut would have been a better choice for the swivel adjustment...come-on man!