Ryobi Pressure Washer: Maintenance

This is how I maintain my pressure washer.
Buy the upgraded model on Amazon: amzn.to/2FSPnOq
Sea foam link: amzn.to/2J7bUof
Pump lubricant: amzn.to/2RFGYPR
Fuel stabilizer: amzn.to/2JaGFIV

[@jr4750jr]

I really don't believe some people. This guy is so kind enough to demonstrate how to give a small service to his Ryobi pressure washer and all responses so far are about edging stones, Prius and more Prius.

[@jr4750jr]

I have just purchased a new Pressure Washer so thank you for this great advice. Cheers from Brisbane Australia.

[@jeffwilliams1607]

Easy to follow advice on how to maintain my newly purchased Ryobi pressure washer. Thanks!

[@fredhorner2622]

Have an older 2800 psi gas Ryobi pressure washer and got my son a new 3000 psi Ryobi gas pressure washer. Noticed how smooth the new one ran versus the older one. I decided to look for some videos on how to maintain these mostly for my sons benefit and found this video. My son and I then did the recommended maintenance on my older unit including buying the Sea Foam additive along with the pump additive and it made a world of difference. Mine starts with one pull and runs as smooth as ever. The video took any mystery out of servicing the equipment and made it simple. Also got to spend some quality “garage time” with my son.

[@brysoncobb]

Great video. Thank you. Glad there’s people out there that like to take care of their things. Should last many many years

[@carlosbran3647]

Great video , you helped me a lot with the maintenance of my pressure washer , I appreciate it

[@leonora702148]

Thank you this was extremely helpful to me. Am a 68 year old woman trying to keep up with maintenance on my Home.

[@Adrian-jh5cr]

awesome this is exactly what I needed I bought mine like 3 yrs ago and still haven't changed the oil! :-) luckily its still running, nice Honda engine in it.

[@cristianvel619]

Thanks for the video. I just got the same Ryobi pressure washer. New home owner here and have never even used gas powered tool.

[@yannirivera3147]

Thank you I only use my pressure washer once a year for my pool it was choking up did all you did works perfect great video!!!!!!

[@anthonyparra5]

Thank you jettlash for this informative video. I just purchased the 3000 psi Honda Ryobi Model.

[@jamesbestor5159]

Great video - very easy to follow from start to finish, details were much needed from oil change to stabilizer to changing filter and using the pressure washer pump protector. Got all the information I needed from one very well done video. Thank you!

[@jettlash1000]

Glad it was helpful! Thank you for your comment!

[@Urban4Wheeler]

Great video, just bought a 3300 psi and I really appreciated this video.

[@dalepartap120]

thanks much man for showing how to maintain a pressure washer, i will get one soon so now i know what to do..highly appreciated

[@armydood3571]

Great video!!! Just bought mine. Appreciate you doing this!

[@fabulousrobert6607]

Hey guy! I hope all is good with you today. I came across your video about the Ryobi power washer. I’m actually buying one within the next few days. I’m getting the 3300 PSI 2.3 GPM Honda GVC190, and comes with a 15 inch floor scrubber which is perfect; along with the other accessories. Thanks for posting your video because its going to make my purchase easy. I saw in another video that said when you first buy your unit, after the first 5 hours change the oil with the 10-30 w. Then after every 50 hours. Just words for thought.

[@jbrousseau13]

Little late to the party but i jsut got one of these Tha k you for the informative video very handy to learn about it Thank you Hope you still have yours and still Works great

[@balloubear92]

This video has helped me greatly! Thank you so much!

[@insertnamehere9154]

Thank u for this video. I used my machine once of 10 mins last year and it's been sitting with the same gas and oil in it. Hopefully I didnt damage anything. I plan to crank it up this weekend.

[@donnierodriguez4442]

I just bought one from someone who let it sit for a year and will not run. You will need to drain the old gas for sure. You may need a really good carburetor cleaning as well. It should be fine after that. Always use non-ethanol gas and you won't have issues with the fuel system.

[@cherrielee144]

You are the best! Thank you so much for the guidance!

[@edwardaleman1155]

Thank you for this video, I just purchased a Ryobi pressure washer and this really helped me out. Easy to follow along and informative.

[@rounder111111]

Ryobi recommends that you just insert the oil level indicator in the engine and not to screw it all the way in when adding oil. Screwing it in will give you an actual low oil.

[@shakamuk3740]

Great video!! Very informative .

[@anantu36]

This is super helpful. Thanks man.

[@jennifergomez534]

Thanks for very helpful tips!

[@Devast8r34]

Thank you! Awesome video!

[@francislara8611]

great explanation easy to understand thank you very much 🙏

[@challengersrt9626]

Really Good video, help me a lot... Thanks and keep the good work 💪 🙂

[@koosh3d]

Very well done video, straight to the point. Thank you!

[@cjtheusful]

FYI: Being a Ex Military Soldier they taught us too make any kind of Job easier and faster. They have Simple hand held Suction Pumps that would make changing the Oil faster, Easier, Cleaner, and very Simplier Google, Amazon and Ebay has them....I'm just passing on information I've acquired over the years from experiences. I've only used my Pressure Washer once but I'm planning on using Tomorrow before Winter comes. Thanks for the Video well illustrated.

[@doubleitp]

I've been using a hand pump oil extractor for the last two years, I absolutely recommend this method, no mess and only takes a few minutes.

[@beastmodeanakalea7233]

🤙🏾

[@residentmanager3088]

Great idea! I just ordered one on Amazon for $16. Mahalo!

[@NSilver832]

@@residentmanager3088. Don't waste your money. Harbor freight has these transfer manual pumps for 6.99 and of course If you use one of their super coupons you can get it for as low as 4.99. These are very reliable I'm a maintenance tech and have been using these for several years with no problems and hey, if they break just go get another one, they're very cheap.

[@zbeshears6945]

“Had 5 hours on the oil definitely needed changed” Me who’s had the same pressure washer for years and used the hell out of it and never changed oil 😬

[@Proffounder]

Thanks, this was helpful! Do you by chance know the purpose/function of the long bolt with the spring and nut located just under the pressure hose connection (it has a black plastic cover)?

[@JLJr-qg4bk]

Thanks so much! You are great!

[@XTRMJ]

I watched this video & it's very informative. It's now 1 of my bookmarks for maintaining my Ryobi 3000 PSI Pressure Washer. I do need to clean the "carburetor" though, but after pulling it out & realizing that the "jet screwdriver" is around $20 dollars, I decided to purchase a "carburetor kit", worth about $20, & save myself some time. However, the "carburetor kit" comes apparently w/ an oil filter, but I can't find anywhere where they show how to replace it, let alone where is it located. Any ideas,... ??? Thanks,...

[@MichaelHenryGomes1]

Thank you for making the video. It helped alot

[@jettlash1000]

You're welcome, thank you for watching!

[@richardmartinez2010]

The one thing I would add, is when you start up a Pressure washer release the pressure on the wand because it will put pressure on the pump ! Also, do not let your pressure washer run without it being used for no more than 30 seconds. you gonna put damage to your pump.

[@Gabriellariz]

These are the two points I was thinking about, there’s a KZbinr who specializes in small engines (Steve’s small engine salon) where he points out these crucial points.

[@bel2665]

THANK YOU I LOVE YOUR VIDEO Y JUST CHANGE MY OIL WITH YOU HELP..AND TI LOVE CHILDREN PLAYING WITH NATURE AND HOW WELL THEY BEHAVE

[@allendavis6714]

Excellent explaining

[@jettlash1000]

Glad it was helpful!

[@rocaelperez9454]

Very helpful video. Thank u

[@grahamplumbing541]

You can definitely change the tip with it under pressure and or running. No pressure makes it through the wand or to the tip until the trigger is pulled. I love the video though. Thanks for making

[@scorpiojuan1966]

Agree 💯. Típ has NO pressure. It the hose that has pressure.. i change tips while engine running.. another thing..... many recommend NOT to put soap in soap tank because it can shorten longevity of water pump. Instead use a foam Cannon

[@LunaTicFAM]

Thank u sir...very informative!

[@joshuajacoby969]

Very helpful....thanks for posting!

[@jettlash1000]

Thanks for the comment!

[@joshuajacoby969]

@@jettlash1000 one thing that I am finding difficult. When putting in the pump protector, how are you able to screw on the bottle without spilling the contents? I can't figure it out and have spilled half the bottle! Thanks.

[@anthonyr5869]

That is a nice unit

[@giopirmisashvili5514]

Thank you

[@almishu12]

Just bought a roybi Gas pressure washer.What kind of bottle was that you used at the end that you squirted in the pump also on the soap do you dilute or just use it full strengh? Thanks

[@BrianWhite06]

Any idea where those edging stones around the garden were purchased? I like them a lot but can't find anything like it...

[@jettlash1000]

I do not, they came with the house.

[@EduardoGaitan]

so the pump dosen't need an oil change itself just the pump protector ?

[@lifeofmarco8656]

Nice video and very informative thank you. Will try to do this to mine. Can you explain how the pressure screw at the bottom works, im having low pressure on mine but do i need to tightening the screw all the way?

[@jettlash1000]

Thank you for the comment, and I can't answer your question regarding the screw, as I've never had to adjust mine.

[@LouisianaSaturdayNight]

Thank you!

[@kidt3068]

I had a Honda $300 pressure washer. Used it years and years. No maintenance no oil change no carb cleaning. Never failed me. I decided to “upgrade” to the Ryobi isle down. Pump failed the first time I used the detergent

[@donnierodriguez4442]

LOL...this is a Honda engine and I can bet you money the pump is not made by Ryobi. If you ran a small engine for yrs and yrs without a oil change and it ran without failure, I call BS! I didn't mean to type 10 yrs...

[@kidt3068]

@@donnierodriguez4442 well sorry to say you’re wrong on calling it BS.

[@kidt3068]

@@donnierodriguez4442 I didn’t mention anything about ten years

[@thebeybladearmory]

How often are you supposed to use that pump protector stuff?

[@Utilero20]

Thank you for the video. I was considering buying this exact pressure washer model from Home Depot and wanted to learn how to use it. Would you please tell me how does the soap stop dispensing once you want to rinse an area? Thank you!

[@abelvillarreal5383]

The unit recognizes that you've attached the recommended soap nozzle so it draws soap from the reservoir. Once you attach a different nozzle it only draws the fresh water from your hose.

[@bradysolaem2467]

Yeah ive noticed it has a tendency to suck up soap no matter what I have a selector tip 2 soap settings but when I'm purging the air initaly before use its obviously soapy.

[@rustyreview]

When I squeeze the pump guard bottle it doesn't push liquid through the system. No matter how hard I squeeze

[@ivanramirez4838]

Just got mine delivered today , did your coke with a lot of lubricant in the air filter?

[@antwansmith2041]

When I put the lube inside the input it doesn’t shoot out the outlet!! What does that mean?

[@Mach1Chriss]

try the aerosol pump saver way easier than the bottle squeazing foresure.

[@kimjerald1]

After you started the engine, did you switch from start to run? Is that what u did?

[@bryans8193]

So with that particular soap concentrate do you just put it in the soap dispenser tank without diluting being it automatically dilutes it 20:1?

[@tookey2249]

Yes once you switch the nozzle on the wand to soap, it dilutes it 20:1

[@Run4urlife13]

Do you use power care after every use?

[@numberoneJATT]

Approximately how much seafoam per gas tank?

[@reid1boys]

how do you get the wheel off these things?

[@mrkongofliii33rivera25]

I tried this today didn't go as every video ... is because mine is brand new and it was the first use ?

[@mikemontero2165]

thank you !

[@jettlash1000]

You're welcome!

[@andrew41980]

What happened to the Prius?

[@mike7204]

How do you change the oil on that?

[@raymondampela8409]

Thank you for posting this ! I had no idea there was a pump protector to squeeze and removing ions from the water hose feed before attaching. Instead of using regular fuel, I strongly recommend to use a product called TruFuel which is a ethanol free fuel which won’t gum up for long storage periods. It’s around 18.00 a gallon. Well worth not having carburetor problems and surging of the engine. No Sea foam will be needed using TruFuel, nor fuel stabilization. TruFuel has a two year shelf life and can be purchased at Home Depot.

[@raolito1980]

My pressue washer would run through that fast. I use mid grade or premium gas. I would use tru fuel for my weedeater blower or chainsaw.

[@raymondampela8409]

raolito1980 Yes I agree that a power washer burns way more fuel at 20.00 US dollars per gallon.

[@bluestar9463]

Thought you changed out of those brown dress shoes - But they're back.....

[@sb9e]

Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use kzbin.infoUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.

[@hectorssanchez3190]

What oil is it I have the same pressure washer

[@alansunshinemd]

When I squeezed the pump protectors into the inflow, I was met with resistance. Any idea why it would not flow through the pump and out the outflow?

[@jorgegarza9796]

I’m dealing with the same problem, I was hoping to find a solution.

[@raolito1980]

Pull the trigger and let the pressure off gun. Also pull the cord slow one time.

[@jamestapscott9400]

Sta-Bil Pressure Washer Pump Protector is much easier to use, and you do not waste product.

[@Kevin-ht1ox]

I have abused the hell out of my power washer and didn't even know I needed to change the oil. I guess I should do that.

[@LakerChava63]

Anyone catch the caterpillar leisurely passing by at 2:38? Little guy was like, "I ain't getting smashed, I am outta here!"...lol

[@chrisszajcyk7503]

How change oil ?? How often ?

[@benkneisley3001]

You are better off keeping a full tank of gas, and add stabil. My opinion of course, but it’s better than a fuel shut off. Otherwise great video!

[@thebeybladearmory]

They say you should change the oil when it’s warm

[@fernandob2139]

I have this pressure washer . Works good but the only thing is that every time I turn it on it work but I have to hold the trigger. Once I let go of the trigger it turns off . Any help ???

[@TheLosiracer]

fernando b sounds like it could be your unloader valve

[@fernandob2139]

@@TheLosiracer yeah I think it was that. Well I could not take it out it feels like its stuck in there. Some how it works now

[@05tech]

My 3100 RYOBI has been sitting for at least 5 years. I have no gas in the tank although Im noticing some white debris inside tank. Oil still seems pretty good but I plan on changing it out. But the brass connection are all filled with debris, I guess from it sitting. How should I clean that?

[@dunnmoney3057]

05tech CLR or some brake cleaner

[@05tech]

Dunn Money used some distilled vinegar, changed out oil (Honda OEM), and added some Sea Foam before adding gas. It’s been running like brand new. Love my ryobi. Instead of closing gas valve, I use all the gas up. Put that Ryobi to work, 😉

[@loribeaudoin8691]

Lorib I am unable to get the pump protector to go into the power washer. There is nothing obstructing the flow that I can see. I have a Ryobi 3300, puchased this year. Suggestions?

[@jamestapscott9400]

I use Sta-Bil Pressure Washer Pump Protector instead. It has a nozzle with tube that attaches to the water inlet. Much easier to use. Connect, depress nozzle until foam comes out.

[@alansunshinemd]

I connected the pump guard to the inlet as prescribed and was met with resistance and no flow out of the pump. Any suggestions?

[@fkngayassshit]

Same here! I ended up spilling the majority of it. I’ll have to go buy another ASAP

[@jamestapscott9400]

I use Sta-Bil Pressure Washer Pump Protector instead. It's much easier to use and you do not waste product.

[@Kindle1234]

Thanks a bunch for the video. I have a problem adding pump protector. Fluid will not enter pump, none have ever exit pump. Have tried pulling starting rope ' still no fluid exit. do not understand. probably doing something wrong.

[@jettlash1000]

I REALLY have to squeeze hard to get it to go in. I have since switched to a can that just has a trigger to squeeze.

[@Kindle1234]

@@jettlash1000 Thanks for the reply. I will try the same. still cannot get pump protector thru pump.

[@Kindle1234]

@@jettlash1000 Hello jettlash, well followed your advice, bought can of protector fluid, worked great. about two seconds and fluid through pump, thanks.

[@estebancamachomartinez724]

Agree, the ones that come pressurized are far better. Briggs and Stratton makes one and its the one I use.

[@noel3466]

What type of gas the regular 87 ?

[@jettlash1000]

I use 87 but I make sure to get non ethenol.

[@mikeswink1031]

Why not use the hole under the drain plug to let oil drain .

[@aeromedical6776]

There are no drain plugs on RYOBI pressure washers. Trust me - I’ve cursed out the manufacturers (under my breath) every time I have to do an oil change. Who designs a small engine piece of equipment without an oil plug? I use a device that I can stick in the oil fill hole and suck the old oil out of the crank case. Better option than tipping the unit to let the oil drain out.

[@gregoryeberly5302]

What about the spark plug ?

[@jettlash1000]

I have never had to do a spark plug on any of my engines.

[@jearmeymorgan8297]

Why do people think that spark plugs need to be replaced all the time? Spark plugs are no different than any other part.. replacing a working spark plug is no different than deciding to randomly replace your power steering pump for no reason. Don't make no sense.. it's rip off mechanics and part counter boys trying to make sells that have people thinking that spark plugs need to be pulled out and replaced for no reason.

[@gregoryeberly5302]

Jearmey Morgan , the difference is that the spark plug will wear out

[@brucey5585]

Weird. My pressure washer wont start if the water hose is turn on. It will start if the hose is off and turn on afterward.

[@jettlash1000]

Interesting!

[@albyyaris2]

Yeah.. why did you sell the prius?! :( Your vids about that car were really interesting.. Such a shame

[@jettlash1000]

I’ll be back at the car videos soon. Thanks for the nice comment.

[@albyyaris2]

@@jettlash1000 thanks for replying back. I'll definitely watch them 🙂 BTW, I really meant what I said before, your prius videos were really good, in fact I got one myself because of you (a 2018 four touring) and I'm really enjoying it.

[@jakeflo4215]

Been using mine for 10 yrs no washing hose for iron, just plug and use no Paranoia

[@bradysolaem2467]

Lol tru I second that.. If needed I'll put some vinegar in the hose and push that thru for hard water build up. Hit it with the C.L.R. LOL

[@thetruthhurtsu]

Too much work. I would just hire someone to do it LOL Great video though.

[@Remzztv]

This washer gives me issues everyday time I use it. I’m able to turn it on and then it randomly turns off.

[@junebickerstaff]

Remzztv same problem i found if i loosened the gas cap it ran fine

[@daniellanzotti2391]

I watched this to see if I should buy an electric washer. Yep, too lazy to do all that😂

[@jettlash1000]

Ha! There are days where I think that may have been the better route to go.

[@user-cc6ih4ld1q]

jammed motor after 30 minutes of operation

[@BlackBirdieGolf]

this pressure washer sucks, I have an issue with it everytime I try to use it.

[@jettlash1000]

Really??

[@jearmeymorgan8297]

Lol what issues might you be having? Care to elaborate? May be user error?

[@domingovillafane4237]

Trimitir en español

[@kevinfrasier5007]

OK slim america, skinny Chris evans, captain america .5

[@johnm8961]

Worthless. Can’t see squat with the dark video and in the tall grass.

[@LCculater]

Isn’t sea foam only for two stroke engines , that’s a four stroke ?

[@jettlash1000]

I’ve always used in in everything. I see quite a few people that use it in cars as well.