S.H. Figuarts VEGETA (24000 Power Level) Dragon Ball Z Action Figure Review

[@AnthonysCustoms]

Check out INTO THE AM and save using this link! intotheam.com/anthonyscustoms

[@Bitzen2057]

The shoulders are too big. Someone swapped these shoulder with armored Trunks and It seems to work better.

[@phoebusapollo8365]

Back then Vegeta was built like a gremlin, short and wide, the sculpt being more detailed makes the shoulders look big but his proportions were pretty similar back then

[@Bitzen2057]

@phoebusapollo8365 oh I meant they're too big for the shoulder pads. They rub and get paint on them. They needed to either shrink the shoulders or make the pads bigger for better functionality.

[@phoebusapollo8365]

@@Bitzen2057 o, nvm, carry on then

[@coolbeans107]

Do you have a link to someone swapping the shoulders? I wanna see it.

[@Whoopsie00]

I've also seen someone swap the head, arms and legs from this to the old torso and it looks incredible. Lots of kitbash opportunities, sadly a bad stock figure

[@_gelato.god_4265]

If they didn’t do the weird thing with the shoulders this figure would be nearly perfect

[@TamerChris]

The faces are fantastic but the articulation is not great. Legs are the same as previous Vegeta but the ab crunch is worse. That neck gap too. I think that you're quite generous in your scoring this time round.

[@timdoe8895]

He most definitely is.

[@chewymew]

It's funny how infrequent viewers of Anthony are saying "ugh you're such a hater!" And then us frequent watchers are saying, "Anthony was too nice on that rating"

[@FlyinggMushroom]

​@@chewymewbro ive been anthony sub for years since I started collecting. And I agree with "the infrequent viewers". Anthony nitpicks and complains over little shit

[@chewymew]

@FlyinggMushroom Well, it's a review. Do you want him to not point out flaws?

[@Brawr183]

It’s weird how they insist on that weird hip design with that thong look yet it doesn’t offer anymore range

[@FlyinggMushroom]

I agree, but at the same time I prefer the sh figuarts hips over the uglyahh dragon star hips

[@nickbraam7274]

I want this but 100$ isn’t justifiable for me. These prices are getting to be too much to keep collecting anymore

[@treyvonishere4375]

I skipped. Utterly appalling for a half baked figure for $65. The torso and head are all that’s new. He doesn’t come with a whole lot. Easily could’ve been $35. And honestly since he’s from the Namekian arc a dragon ball would’ve went a long way.

[@qemuel]

I wanted this, but that pricetag is BRUTAL. Solid review as always, thanks! 👍

[@fbijeffrey6547]

It was only $60 bucks

[@TheXenomega]

It was $65 +$10 shipping + 1 year wait for preorder. Now its $120 at bbts on release. The pricetag is BRUTAL.

[@AlphaProto]

Early Vegeta was my favorite take on the character. This head sculpt is radical. It makes the other Vegeta look better too. The neck gap hurts this figure's appeal more than anything. I'm still happy to have It.

[@ericchung3177]

A HUNDRED AND TWENTY DOLLARS?!

[@printrabbit8117]

I skipped this one. Besides the nice heads, it didn't look like the upgrade I hoped for. Other than the stuff mentioned like the gappy neck, he's still a bit tall and the db super arms they reused are too muscly for this era. And the shoulders are huge! Arms should be subtle like the legs. It's nice overall but I can wait.

[@angelodilullo7591]

Hey Anthony, are you gonna review the Rurouni Kenshin figuarts figure? Great review as always.

[@AnthonysCustoms]

Yes. Thanks

[@irvinp3224]

I vote for Jada Toys to take over the DBZ line,they would do better than SH figuarts especially for the price too smh.

[@noahgettheark]

I'd honestly make the shoulder pads out of silicone so they flex and look better when posing him. But tamashii never learns, as seen with the way the regressed with the neck joint. They could literally have used the one they did for SSJ4 Goku and Vegeta, LSSJ Goku and the new Trunks.

[@QuantumSurge64]

I got the 2.0 version of this design, and I wouldn't mind getting this version if it weren't for how easily it goes in and out of stock.

[@atlas4647]

Love the high framerate video

[@AnthonysCustoms]

Thanks

[@omegashenron8]

I hate that neck gap so much but yeah.. this figure feels like a regular release, not a P-Bandai.. Shoulda been regular but Bandai is gonna Bandai.

[@godofcrap42]

Wait, Saiyan Saga Geets was supposed to have a PL of 24000? I thought he was 18000

[@m.a.industries]

He’s namek saga Vegeta

[@phoebusapollo8365]

This is early Namek saga Vegeta

[@dankerbell]

this is namek saga vegeta, he doesn't have the leg skirts, his name is a reference to when he says his power level is 24k before killing cui, and cui comes with parts for him

[@thebadmanofallsaiyans732]

I like how you called him Geets😂

[@freethoughtism]

I wonder if those shoulder pads can be removed 🤔 Great honest review as always 🫡

[@Triumphantchild]

Yes, they can.

[@AnthonysCustoms]

They can. They will likely pop off while you're posing the figure.

[@matthinton19]

Could you cover dragon stars baby vegeta?

[@dankerbell]

the faces are nice but his chest is way too barrel-y, at least he's shorter considering the saiyan saga vegetas are too tall

[@TimothyLau55]

24000 power level is when he arrived in Namek. Seems like Bandai is releasing prototype joints instead of completed version.

[@warpfrenzy]

If they aren't going to put the blast effects and other accessories in the box at least make them a separate item we can purchase. I've bought the flight stands before and I would buy a kamehama effect.

[@PedroARCruz]

I got great news for you then, they just released the SSJ Goku Teleport Kamehameha set in Japan should be coming to the US in two or three months

[@warpfrenzy]

@@PedroARCruz That is good news.

[@WillTorbett]

For a new, premium release, I expected a lot better.

[@kojoshrine]

Wow you were real nice on this one. You even forgot the HUGE football shoulders that are way larger than the rest of his arm. You basically Gave him an 8 because of his faces. they also over engineered the latest Namek Goku which made him look very segmented, but he at least had far better articulation. was personally very disappointed when I got him.

[@Taraka1]

Okay he needs a hand crushing the scouter and be able to swap out a shoulder pad and shoulders for battle damage if he's not getting blast effects

[@anthony88ization]

13:33 the shoulder pads were done right with these figures 1 time, and it wasn’t even on a saiyan…. It was frieza second form.

[@rafrecon]

I swapped the shoulders with armored trunks and gave him the slightly longer legs of armored vegeta and that fixed the weirdly too wide proportions. I also gave it the Allstars hip armor and honestly he ended up as my perfect Sayan saga Vegeta

[@anthony88ization]

5:05 these are the Namek versions of these characters. But SROE doesn’t stand with this more current run… they’re getting more stylized and saga specific and that Goku is too basic. The faces on Goku are too soft. The new sdcc Goku is a great example. I hope we get at least a headsculpt to go with this Goku.. This would be a good Goku to do exactly what they have the promo shots of the Medical machine doing… Sitting in that tank with the newly provided head sculpt on it because it looks way better than the one that came with the figure lol

[@erickzuluaga677]

You can make the shoulder pads sit flush with the crossed arms. I have mine posed like that, the shoulder pads can come all the way down

[@pokeman5699]

7:12 *so many versions of Goku and Vegeta

[@whataday2624]

Seeing this figure makes me happy I never got rid of my 1.0 Vegeta, the faces on it are soft, but it looks so much better

[@chewymew]

I like it when the packaging's colors match that of the figure. It gives it the aesthetic of the figure, so you can kind of tell which character it is.

[@diegoberrios3374]

Honestly, I thought you would go harder on this vegeta. I would say it’s a 6/10. It’s not bad but i think the new faceplates, the headsculpt, and overall aesthetic really help it. But the articulation is just lacking which is just frustrating because they’ve done better articulation on other figures in the DBZ line. (LSS Goku, Mecha Frieza, BFTF Trunks, Krillin, and Super saiyan gohan) like they know and can do it I just don’t know why the choose to do vegeta dirty. Especially with an iconic look such as this one. I don’t mind the shoulder pads or the shoulder articulation. I think that’s the best part of the figure. Otherwise it is lacking. In accessories and articulation especially. But it looks good ngl.

[@MikeCollector84]

I got this figure and with the cross arms the shoulder pad do not leave that gap on mine it sits well no issues on mine you just have to adjust it

[@AnthonysCustoms]

It leaves the gap in the photos bandai provided too so... The gap is designed into the figure.

[@MikeCollector84]

@@AnthonysCustoms yeah i saw that thats why i was on the fence about buying it but once in hand i noticed mine doesn’t do it i will put up a short showing that mine doesn’t have that gap

[@_9T9T1_]

chest piece and shoulder pads should be rubber, no gaps and fully posable

[@s2knightryder]

Thank goodness they came out with an effects pack.

[@juzoinui4627]

“ITS OVER 8000!?”

[@photondebuger45]

Is it too hard to copy the shoulders from the armored Broly to these guys? It seems they are making more of the characters that have the shoulder pads and messing it up.

[@PedroARCruz]

The main reason why it worked there and not here is cause Broly shoulder pads sat above the shoulders all the way through, but these older armors the shoulder pad comes down and connects to the chest in a gradual curve and obviously can’t make the chest stretch to connect to the shoulder pads so that gap is there, fully swappable chest pieces plus pre posed shoulder pads would be the way to fix these without any other major compromise (like cutting a butterfly into the armor or something)

[@judyannfontillas4462]

The tail though

[@keozs]

I really thought you were going to destroy this figure in the review haha I’m very surprised at the 8/10 rating! Always looking forward to your review after I get a figure

[@morenorecca6104]

nice review anthony, i didn't expect it to be 8/10 i thought you were gonna go for 7 or 6 because of it's MANY flaws

[@joehodgson9217]

This might be my most disappointing release of the year so far. Agreed on the silhouette and the faces. I love that they're doing these stylized, exaggerated, portraits that better match the source material. I hate how he moves though and the shoulder pads suck. I was able to get the crossed-arms piece to work with the pads down. It's annoying and takes patience that even their photographer didn't appear to possess since he has huge gaps in the back of the box. My other issue with the shoulder pads is that mine have small gaps even in a neutral position and it drives me crazy. At least the old, crappy, hinge had a flush fit. And that diaphragm joint is crap. Combine that with the neck and this is a SHF release that I just want to pose in pretty bland, neutral, poses when that's not how I typically interact with this line.

[@DomitriCervantes]

I'm gonna take the skirt piece from the dragonstars line and put it on this guy , it looks way better with the skirt

[@PedroARCruz]

They decided to reuse the Super Vegeta shoulders and arms even tho the rest of the body is mostly new so it ends up clashing, Vegeta was short and stocky but he wasn’t this wide especially with the cylinder chest they gave him here but the main issue is easily the arms, too long for the body and too defined for the aesthetic. Vegeta’s spandex wasn’t this skin tight in the Frieza saga

[@AlphaProto]

I just wish it was a cm shorter.

[@raifdanial3206]

Btw, you can make the shoulder pad sit correctly if only you placed the cross arms under his chest, but it will look a bit whack imo

[@leechqueen4604]

I Couldn’t get the Saiyan saga Vegeta to complete the saiyan display,but this will do.

[@maki9978]

Hey Anthony, are you getting your hands on this years SDCC Figuarts exclusives early again? Great review btw can’t wait to see more!

[@GunFeverr]

This was $65.00 on P-Bandai versus $119 on BBTS, I like BBTS for a lot of things but it’s obvious what they’re doing here and should be called out on it

[@GunFeverr]

And the defense force will tell you it’s so they aren’t selling at a loss that’s why they sell them for nearly or somethings over twice the price :)

[@AnthonysCustoms]

They have to buy pb releases like anyone else. That means at least 75 per figure. They've never sold any pb release for more than double. If you don't like the price, don't buy it. There's nothing wrong with them selling for a profit... Like a business. It's an open pre-order for all standard pb releases. There's nothing nefarious going on.

[@GunFeverr]

My perspective on this is a bit skewed from being into Gunpla, before P-Bandai US started their PB kits would get resold by third parties for high markups and even now it still happens when they sell out immediately, there’s not much in the way of preventing resellers from buying up preorder stock until it runs out. I realize a lot of this comes down to PB being an awful store. I agree saying they’d sell em for more than double was a mistake on my part, comparing 5 of their PB DB figures the price difference ranges from 49% up to 59% but mostly around 50%.

[@woody1856]

have you done a personal top 10 sh dragon ball figure video based on articulation, accuracy and accessories?

[@AnthonysCustoms]

kzbin.info/www/bejne/fmSoZYSKZqmoias

[@woody1856]

@@AnthonysCustoms awesome can’t wait for an updated video. sure there has been at least one new release to shuffle the list.

[@AnthonysCustoms]

Have to wait until the end of the year at least.

[@snkosen9798]

It reminds me a bunch of the shf imperfect cell, with the look being prioritized at the cost of torso articulation, and the swaps needed to tweak the mostly good proportioning. also regarding the crossed arms, depends on where you put them. ive lowered them just slightly from how you displayed em and the shoulder pads have no gaps. If anything, both the promo art and you have them too high from the pose referenced in the manga.

[@kingdomcomesuperman3669]

I prefer it when the background matches the figure especiall for ones like the Ginyu Force where it synergises with their smoke colours. For hair colour especially black I like a matte finish. I was sold on this guy from faces alone even though I expected minimal retooling from the 2.0. release. Considering the did it for the body giving him the Namek-era curved traps I wish they followed suit with the Shoulders making them more sreamlined like the 1st 2 scouter releases instead of the unfitting bulbous Super Vegeta design, getting in the way of the shoulder pads too. Articulation in general for me lowers this figure to a 6, harsh but I'll still get it for updated faces and aesthetics being good. I'll pass on the old battle suit as that has many of the same issues ontop of the faces outside the crying one not being as good.

[@xeanheart]

I think I'll just stick with the 2.0. The new heads look better, but that's about it.

[@poultrygeist8253]

It's not prefect, but I regret not buying it. The promo pictures looked terrible, it ended up a lot better.

[@AlexPerez-gk6np]

Are you gonna review cui?

[@chrisfecteau2563]

Seems bandai is giving us accessories in the form of the effects part sets or throw them with other releases. This vegeta has a face plate and hand included with kyewi. For the casual collector thats frustrating.

[@telephantasm4070]

QOTD: Don't really care, but all black would be my choice if I were making and selling figures :P

[@Matt-kw6nx]

I wonder if there is a way they could use the 2nd form frieza style shoulder engineering somehow for the saiyan armor characters? Or maybe thats just dumb I'm not the most knowledgeable when it comes to figure engineering

[@intotheversetoys2345]

Lets start a new campaign #wheresthemeat 😂

[@zannusx]

I was excited for the upcoming old suit style Vegeta, but it just looks off in the shoulders, even worse then this one

[@thebagheadz1991]

“The ball hinge shimmy” 😭

[@wesb1931]

I haven’t bought a single figure with shoulder pads. Can’t bring myself to do it

[@GrandKingGhidorah]

Do you think it would be viable to have the shoulder pads made out of a really soft silicone?

[@AnthonysCustoms]

Not silicone but soft pvc.

[@AnthonysCustoms]

Or something like a silicone but that can be painted.

[@stygianhoplite]

I wish they did the shoulder pads like frieza form 2, those were beautifully implemented. Or do something similar at least... tired of these ugly as sin shoulder pads. But hey there's that hope for 3.0 vegeta. Not wasting another penny on 2.0 vegetas with their ancient articulation, absolutely awful ankles in particular.

[@lazergator1016]

question will you be reviewing the new Event exclusive Sh figuarts cousin (Kakashi Hatake) Frank?

[@AnthonysCustoms]

Possibly

[@Zapdos536]

If all the boxes were black it’d be way too boring Anthony

[@Shinmsl]

The next Vegeta is the later Namek saga Vegeta with older model battle jacket, so no problematic shoulder pads on that one but already the previews show it has the same ugly and gappy neck like this one 😮‍💨

[@Beerus-d8g]

Early Vegeta is before the modern vegeta. But, you can hate on me in the comments

[@Ph0t_0w0]

I sense mid

[@KeeperPlus]

Those shoulders are way to wide. The new namek vegeta is the same way

[@chrisburrelljr9270]

I would buy the figure if it came with blast effects.What the hell...l it's dragon ball z Every character has a blast effect wtf

[@bryanmarcia4104]

Figure is cheeks

[@jaioncebollero1168]

No blast effects????!!!!

[@edgardoescobar1393]

The diaphragm and the neck looks bad

[@FlyinggMushroom]

Sh figarts hates the dragonball franchise

[@Blargblarg69]

H

[@timdoe8895]

Tldr:Figure is bad. His shoulders are too big and so is his chest. He is the most disproportionate vegeta ever. He has the Ginyu force body armor shape and it’s bad. The arms are also super vegetas which obviously doesn’t work here. Legs being smaller is good though and obviously the head sculpt is the best part. Edit:And the Ball Hinge neck is back? 5 out of ten man this thing is so mid. This is a repeat of the Legendary Super Saiyan Goku figure all over again. Hyped up to be perfect and it wasn’t, except at least that thing was still amazing just didn’t live up to the hype. This is just reused pieces with a new head sculpt. Neck is also terrible. Painfully bad figure. The legs are also terrible. Figure is bad.

[@forgedtofight]

womp womp