Is there a different installation process with pavers?
@AlexB-ot9ey2 жыл бұрын
How deep does the pool need to be to have this type of slide? Would 4ft depth work? TIA
@SwimmingPoolKit2 жыл бұрын
According to S.R. Smiths Typhoon slide manual, a minimum of 4' 6" water depth is required. You can check it out here: www.srsmith.com/media/176613/typhoon-owners-manual-06-713.pdf
@MarioQuintanilla-o9y10 ай бұрын
Does this slide need to be grounded? I don't see any metal parts except the screws that attach to the concrete.
@TheTeamblack5 ай бұрын
No it does not need to be ground. It’s all plastic except for the hardware.
@79bnice4 ай бұрын
Can you connect a hose for water to come out from the slide since my pool is already built.?
@Hdog56-o1f16 сағат бұрын
I have this exact slide and connected a hose with a T valve connector to my polaris cleaner hose connection and works great
@barbarajenkins74426 ай бұрын
Can you install this to a trex deck
@GREEKATION Жыл бұрын
How do you connect the water to an already built pool?
@SwimmingPoolKit Жыл бұрын
Hi Coleen, there are several ways you can do this but here are 3 that you can consider. 1. Dig under the deck and drill through deck to run your line. 2. Cut the deck, run the line and then patch your deck.
@theunkownmr.562 Жыл бұрын
@SwimmingPoolKit or use the not so clean method of running an external pump that pulls water from the pool up into the slide? It's not as elequiant, but it would get the job done.
@Steelcurtain37606 ай бұрын
I was going to buy a slide until the water issue came up
@brianjacobs12833 ай бұрын
This is what I was wanting to know. I bought a house with an old pool and all the cement was poured years ago. So how would I get a line to it?
@Hdog56-o1f15 сағат бұрын
Easy, connect a hose to the same connection where your polaris pool output is inside your pool . Just need a T valve so it connects both to your pool cleaner and the pool slide. Just have to turn the valve to direct the water to the cleaner after you use the slide. My slide is bolted right next to where the output is on my pool wall so hose cleaner so hose connection is very seemless and inconspicuous