S1-093 Setting Up a Headphone Mix in Studio One

www.homestudiocorner.com/presonus

[@mober5969]

Joe, solved my big questionmark of today! :-) Thanks a lot!

[@Humanleague002]

Question: Where do you plug your headphone output? I have a 32S and still haven't figured out how to get a separate mix for a monitor. How do you hear 3-4?

[@xythaum]

can i use two headphones in my interface ( focusrite pro 14)?

[@paulypj]

Hi all, would I need to set the UC output selectors to DAW 1&2 instead of Mixer for the general purpose outputs of the firestudio project to be controlled only by the DAW (S1) ?? Currently I have the issue where my S1 cue mix is only working on playback, so when I record it is just a main mix, I want the interface output to always be the cue mix (recording as well as play back) Thanks.

[@Orourkebanjo]

How do I set up the headphones it’s plugged into the box, but I can’t get it to work

[@timothydillard4192]

How can i export song with click left backing right? When i export track click is on both sides

[@hastediscipline1525]

Is there a way i can set this up if i have a scarlett solo???

[@viktorragnarwashuus8157]

Hey, I'm on a StudioLive AR16 sending to a headphone amp using the main outputs. The headphone amp has aux inputs and I want to send the click track through a hardware output. Phones, monitor1 and monitor2 seem to be my only options. I'm not sure how to solve this, any advice? Thanks :)

[@shawnabdullahsani2845]

how do i apply this to my SL1602? im using studio one 4....thanks

[@Kentavious444]

I'm using an 1818VSL and Studio One. How can I get the solo and mute functions to work when monitoring through headphones?

[@klrcat9769]

I'm using a PreSonus AudioBox 44vsl. How do I use the 4 line outputs as "Aux sends" without having to go through "Studio One"? I'm looking to get direct monitoring with no latency, but I can't find any option to do routing like you said ( 2:02 ). *Edit. Scratch that, Virtual StudioLive was discontinued in 2015, so PerSonus AudioBox is now useless. Thanks Obama

[@adrianallen5347]

Cue mix

[@tylersyphertt3033]

How would you send reverb to the vocalist for their cue mix while still recording flat?

[@HomeStudioCorner]

You could set up the reverb on a bus instead of and FX channel, then you have the option to use a send on the reverb channel to send 'verb to the headphone mix.

[@ns1983za]

How do you send it to the headphone mix? The only send option I get is the main output.

[@Itsklops]

Can you make a video adding reverb to headphone out

[@Romlingen]

kzbin.info/www/bejne/bYnUZWuBmtOnqJY

[@_Only_Zuul]

does this work in S1PRIME5?

[@YannDANIEL]

Why don't you use the "cue mix" option (accessible in E/S options of your song) ?

[@HomeStudioCorner]

There's lots of ways to do it. I like this way. :)

[@YannDANIEL]

+Joe Gilder for sure! ;-) But I thought presonus created the cue mix for this purpose and that you do not know this option. Thanks for your great videos and tips !

[@HomeStudioCorner]

+Yann DANIEL you may be right. I don't use every feature. :)

[@WilliamKitchens]

@@HomeStudioCorner I'm new to Studio One after just leaving 16 years of Cubase now at 10.5 Pro... I wanted the ability to use the Faderport 16 in full so made the switch... Here's the issue.... Joe's version of a Send Cue Mix is the traditional way from the Analog world which I prefer... In fact you can Control the Send levels on the Faderport which is awesome but.... There is no way to copy Faders to Sends! This would allow a copy of the Mix to match the initial instance of the Mix to be tweaked including pans.... Come on Presonus! A cycle thru the Sends button never makes it to the DAW Cue Mix Sends! If you use the Cue Mix sends option built into Studio One they are automatically set to the mix including pans which is awesome... then any change made unlocks that Cue mix ( A Lock icon sits where the Pre-Post Fader Option is on the send) to be customized.... Want the Main Mix Back on the Cue? Click on the Lock icon and it instantly returns to the Main Mix Settings! Awesome except that the Faderport a Presonus hardware product has no feature to use the Faders on the Hardware to Control levels or Panning on the dedicated Cue Mix Sends inside Studio One! Presonus needs to fix both or at least one of the other.... Either allow Control of the Cue Mix Sends in the DAW on the Faderport and/or allow the the DAW the option to copy Faders to Sends so that the Hardware can set levels starting with the Main Mix on the Sends you create.... I can't decide which Cue Mix option I prefer now the way it is with these drawbacks! Note: Not a Logic user but I'm told copy Faders to Sends is a right click option!

[@WilliamKitchens]

Great work by the way! I missed an obvious pun! DAWbacks!

[@larrytate1657]

I have two headphones from my interface. It works when I keep both of them playback daw 1,2 on both headphones. That's setup right, correct?

[@larrytate1657]

Can I make a second "Main" and make that 7,8,9,10 and have 7,8 for one headphone mix, and 9,10 fir the second headphone mix?

[@HomeStudioCorner]

Yeah, as long as you can assign it, you can set up a different pair of outputs for a "cue mix" for headphones.

[@larrytate1657]

Thanks for getting back . I have all three, my two headphone mixes and my studio monitors all on "playback daw" 1,2. It's ok that they're all the same as long as I don't need customized mixes right?

[@HomeStudioCorner]

Yup

[@Andre7414]

What if they just to hear more vocals?

[@Andre7414]

Like just hear themselves louder.

[@SoundStudio36]

i have audiobox vsl1818 an d i use like you the vsl software but every time i open new song i have to move the send in vsl in the track i monitoringto have sound again, you know why?

Is this possible with interfaces like Mbox3? No, because they have only one stereo output, right?

[@HomeStudioCorner]

If they only have a stereo output, then no. 🙁

[@guitarz99]

A massive failure on studio ones part is their monitor system , convoluted buggy system