Saber Tactical Air Tube/Bottle Clamp with Picatinny Rail Installation

[@peteralexben]

i got one on my dreamline cilinder ,i put a thick silicongrease at the rubber surface ,now i can easy rotate the gun to get it level. works great, rotating is best done as close to the barrel you can get.

[@WiscAirGunners]

Interesting idea.

[@larrywcollins]

Is it possible to put a quick release lever of some type on the bottle clamp rather than tighten with allen screws? I would like to be able to put the clamp on the bottle quickly (on occasion) when I use the crown at night with a Streamlight and then remove the clamp during the daytime.

[@WiscAirGunners]

It’s been tried. The main problem comes in when the QD mechanism gets in the way of the pic rail. It would have to be made with a much longer “stem” for the pic rail section.

[@BullseyeBob]

Very nicely done Paul. 🙂

[@WiscAirGunners]

Thanks Bob!

[@plutoofdeath1013]

I know it's for air tanks . Looking to get a bipod on my Umarex Origin . I don't want to drill any holes . Wondering if that would work

[@WiscAirGunners]

The smallest one Saber makes is 34mm. I think the Origin tube is 25mm. I guess it would be possible to have a 3d printed spacer made to evenly fill the gap.

[@thomas-ms6st]

will the one u put on can I put that on my wildcat mk2?

[@WiscAirGunners]

Yes it will.

[@47coffee]

Curious if it'll fit snug on an aea terminator barrel, so I can mount a front iron sight.

[@WiscAirGunners]

What’s the diameter on that barrel?

[@shaunknight1450]

Hi , have you noticed any problems with point of aim shift with the cylinder version flexing ?

[@WiscAirGunners]

None. I won't say I baby my rifles, but I also don't put extraordinary amounts of downward force when I shoot.

[@nothanku3715]

Will this fit on gk1 air tube?

[@WiscAirGunners]

What is the OD of that tube?

[@liam7822]

I'm not too sure about one of these, do they mark the bottle or like loosen it? just doesn't seem the best for a bottle

[@WiscAirGunners]

I checked with Saber Tactical and they are not aware of anybody having a problem with the clamp damaging a bottle or tube. It has not caused loosening of the bottle on any of the guns I've used mine on. The inside of the clamp is covered with a dense foam, which is necessary to protect the bottle, provide grip, and fill the gaps between the clamp and the unevenness of the bottle surface.

[@liam7822]

@@WiscAirGunners alright thank you because the owner of the shop ordering them in wasn't too sure himself if they're alright for the bottle

[@d4ngru5h83]

Do they fit the dreamline compact? I believe it has a slightly bigger tube diameter?

[@WiscAirGunners]

I don't have one to test, and I cannot find the diameter of the air tube online. Do you have one you can measure?

[@d4ngru5h83]

@@WiscAirGunners bought one, unfortunately doesn't fit! Going to return it soon.

[@WiscAirGunners]

@@d4ngru5h83 Thanks for that information. Too bad it doesn't work on there.

[@d4ngru5h83]

@@WiscAirGunners yeah, need to make a third version/ size of them!

[@murfspop]

What is the diameter of the smaller tube in MM's?

[@WiscAirGunners]

34mm

[@murfspop]

@@WiscAirGunners I was hoping it would fit my AEA SS pistol I bought after your review of same.