What's the gap on the Double eagle N4 gbb?

www.buymeacoff...
WWW.LINKTR.EE/SABOTER
Comparing the bolts of original Tokyo Marui mws and Double eagle N4 noveske #noveske #mws #doubleeagle

[@Garcialok]

TM's upper & lower receiver is a little bit smaller than other ar gbbs, even won't fit TM's own aeg mags. DE's receiver is "normal" size and fit aeg mags,but the bolt group is TM's Spec ，so actually is DE‘s ejection port longer. DE's magwell is also wider ,So it will vibrate a bit after inserting the magazine

[@Saboter]

Awsome feedback

[@marcushughes6452]

The Noveske n4 is based on a 300blk which I believe has a slightly larger ejection port than a 5.56 ar upper on the real steel guns.

[@Saboter]

Well could be actually

[@kristofhorvath6652]

Manufacturer's lie. The entire point of 300BLK is to be able to use it in a 5.56 platform without any major refitting, you only need a different barrel and that's it. You can use the same magazines ( as long as it's supersonic ), same bolt face as the shell casing has the exact same bottom as a 5.56 case and same buffer system and fire control group. They are designed to be used in standard M4 upper receivers so no, ejection port should be the same. They just f*cked up the modelling like on the rest of the rifle. Not only is the ejection port larger, the entire upper and the magwell on the lower receiver is wider also.

[@Boozer2002]

I bought the DE Noveske N4 a few days ago and it's the Gen 3 version and I can say that the gap is much smaller than the version you have in this video.

[@Saboter]

I have version 1 and also bought 2 version 2s but it's the same gap. Good to know about v3

[@nerdie6598]

How do you know which version that you have? I bought mine last week and it also has a slight gap.

[@Boozer2002]

@@nerdie6598 I'm not sure how to tell the version but the shop I got it from said that it is GEN 3. The gap is still there but it is much smaller than the one in the video.

[@Obsolete_E]

Probably shouldve milled the port smaller by a little bit to reduce the gap just for looks

[@Saboter]

True.. I believe they are working on it

[@arthurau6438]

i think the cyma t8 one also has that gap

[@micksoria9521]

DE upper on MWS lower, does it fit?

[@marine_ronin0137]

full stock ? these gap often rubber problem or hop up chamber receiver

[@ComradeDogger]

the ejection port literally just looks like its just a tad bit longer on the N4, so i dont think theres any issues with the gun itself, the port is just a few millimeters longer

[@Saboter]

Well it's an issue on all 5 I have already checked. However it has no effect on the performance at all

[@Aitor-tr9dx]

Maybe is a stupid question but, are the receiver/upper interchangeable? I think I'll receive it this week, so i can test it also :D

[@Saboter]

I have already prepared a video and will post. Yes they are!

[@Aitor-tr9dx]

@@Saboter niiice thanks!

[@joseforra8741]

Where you buy this mags Thanks

[@Saboter]

It's in the box. At the first edition.

[@bogdan192]

Hi. Do the mags fit one another? Any incompatible parts?

[@Saboter]

I'm going to release such a video soon. Cross compatible

[@isaacshively5976]

Get a black bolt

[@highspeedjoe]

You probably have debris/material between the end of the bolt carrier and the actual chamber that's stopping it from going all the way forward.

[@Saboter]

Nope mate. Unfortunately it's a design issue

[@highspeedjoe]

@@Saboter Damn, that's unfortunate. I was eyeing this and the cyma one too :l

[@Saboter]

They plan to fix it on one of the next batches