No video

Installing a slide gate operator Step 6: Installing the chain | SC0044

  Рет қаралды 71,231

Safeguard Controls, LLC

Safeguard Controls, LLC

Күн бұрын

Call 214-931-2626 for the EXPERTS in access control, audio/video, automatic gate, video surveillance and low-voltage project management.
-
This is a very general overview of the steps to installing a commercial or residential slide gate.
In step five we install the chain. When looking down on the chain you don't want left to right flex between the chain bolt and the idler sprocket.
-
Please call the commercial and residential EXPERTS in the Dallas-Fort Worth area before you make any decisions about your access control. Call/text 214-931-2626 or email customerservice@safeguardcontrols.com.
Thank you for watching
Brooks "The Access Control Expert"
-
Website: www.safeguardcontrols.com
Linked in: goo.gl/XcfP34
Instagram: goo.gl/Cag9Ke
Google +: goo.gl/1zcX4E
Forum: accesscontrolforum.com
© Safeguard Controls, LLC
Safeguard Controls, LLC
3100 Commerce
Dallas, TX 75226
customerservice@safeguardcontrols.com
214-931-2626
These videos can be used as a general unscripted and unfiltered video blog. All service is performed by professionals or under the supervision of trained professionals. All service should be performed by professionals trained in the respective equipment. You should not take the information given as professional, safety, legal, medical, etc. advice, direction, etc. You are responsible for making informed decisions based on all the information. Information that exceeds the scope of these videos. During normal operation electronic, electrical, electro-mechanical, etc. equipment and devices under test can cause severe injury or death. Electronic, electrical, electro-mechanical, etc. equipment and devices under test can act different than normal operation that can cause severe injury or death. These systems vary. Use this information with caution, at your own risk and there are no warranties implied or expressed based on any information given. Our policies and procedures will change without notice. Pricing will vary. Products mentioned are not necessary endorsements. See associate for details.

Пікірлер: 21
@philipwilkins3812
@philipwilkins3812 3 жыл бұрын
Some manufacturers also make a rack drive system. These are great if installed properly. No chain to deal with. The other thing that makes a big difference is purchasing a get opener with a dc motor. The ac motors start at full voltage and cause the chain to jerk with that full power instant start & stop. The dc motor allows the unit to ramp up and down the speed and greatly reduces the chain slap and torque put on the chain. The other benefit with dc drives is they lead themselves to have battery backup easier than an ac system. A huge plus! Make certain that you systems accessories are wired into the circuit board for power so those too can have the battery backup. At minimum make certain the receiver is on the backup.
@SafeguardControlsLLC
@SafeguardControlsLLC Жыл бұрын
Those are all good points that also have good counterpoints, no system is perfect which is why you have an expert review the site, ahj requirements, manual releases, etc.
@calebymaya420
@calebymaya420 3 жыл бұрын
Thank you I’m about to install a similar motor
@SafeguardControlsLLC
@SafeguardControlsLLC 3 жыл бұрын
You picked a great brand! Good luck.
@fuddcar
@fuddcar Жыл бұрын
@@SafeguardControlsLLC I have the exact same setup but my chain has become rusty and it sounds like its struggling lately. Is there a lubricant you recommend like WD40 or is white lithium grease better? Thanks in advance.
@SafeguardControlsLLC
@SafeguardControlsLLC Жыл бұрын
@@fuddcar Use a silicone-based spray. Check out this link: kzbin.info/www/bejne/i3bVqaF6r6pqe8U
@sandyxo1523
@sandyxo1523 Жыл бұрын
I just tried fixing the chain because it was dragging on the floor and now the chain twisted a little at the end how can I fix that?
@laydeblue8341
@laydeblue8341 9 ай бұрын
Hello, thank you for the helpful video. I changed the chain and everything works fine but my emergency pedal thats suppose to allow the gate to manually open, since I changed it hasn't been letting me manually open. Any suggestions?
@SafeguardControlsLLC
@SafeguardControlsLLC 9 ай бұрын
chain too tight?
@laydeblue8341
@laydeblue8341 9 ай бұрын
Think the chain is ok, not too tight. Might have figured out the cause. Thank you for your reply :)
@fstarockaburns425
@fstarockaburns425 Жыл бұрын
hi - been trying to get a video comparing chain vs rack systems, i have a similar size gate at my shop and looking for a 1100lbs system, but not sure on rack vs chain..
@ricardogomez7996
@ricardogomez7996 2 жыл бұрын
How do you keep the gate from slamming hard I'm having that problem.
@kalijuri
@kalijuri Жыл бұрын
it's in the programming of the automator.
@SafeguardControlsLLC
@SafeguardControlsLLC Жыл бұрын
Its in the limit adjustment, have a pro look at it, Check out facebook.com/safeguardcontrolsllc/ and facebook.com/SafeguardControlsVideoBlog and we have new channels on youtube as well
@bighern1794
@bighern1794 4 жыл бұрын
How much slack should you have?
@SafeguardControlsLLC
@SafeguardControlsLLC 4 жыл бұрын
You have to check the manufacturers specs in the manual. An expert will most likely want to see 2" - 4" up and down travel per 10'. There are a lot of variables that any American Fence Association trained technician will be qualified to answer those questions.
@charlesvalenzuela34
@charlesvalenzuela34 4 жыл бұрын
​@@SafeguardControlsLLC LiftMaster CSL24VDC says chain should sag down 1 inch per 10 feet of chain. That seems to be correct. Mine is 5 years old last month and never given a moment's trouble
@SafeguardControlsLLC
@SafeguardControlsLLC 4 жыл бұрын
@@charlesvalenzuela34 That's what most manafacturer's recommend. We find that works on shorter gates. However, 2" per every 10' works for us.
@IamFreeRu
@IamFreeRu 3 жыл бұрын
Mines only a year or so old, and it’s already starting to rust....
@philipwilkins3812
@philipwilkins3812 3 жыл бұрын
Nickel plated chain will rust. It’s a step up from the black oxide chain but still gets rusty. They do make stainless roller chain. It last much longer but will also eventually rust too. Keep some chain lube on it. That really helps. They sell it at Lowe’s and Home Depot. Don’t use anything with thick grease. It stops the rust but also holds everything that comes in contact.
@SafeguardControlsLLC
@SafeguardControlsLLC Жыл бұрын
check out this: link kzbin.info/www/bejne/i3bVqaF6r6pqe8U
Installing a slide gate operator Step 5: Weld chain brackets | SC0043
8:07
Safeguard Controls, LLC
Рет қаралды 7 М.
Preparing a sliding gate for installing a motor
9:08
Automatic Gates Explained
Рет қаралды 76 М.
Before VS during the CONCERT 🔥 "Aliby" | Andra Gogan
00:13
Andra Gogan
Рет қаралды 8 МЛН
天使救了路飞!#天使#小丑#路飞#家庭
00:35
家庭搞笑日记
Рет қаралды 91 МЛН
Aluminum sliding gate motor installation. For LiftMaster RSL12UL
7:00
Installing a Richmond GTR156 Automatic Sliding Gate Kit
6:24
Richmond Rolling Solutions
Рет қаралды 407 М.
CHEAP Sliding GATE opener Installation and set up Tips
7:14
Simply Tinker
Рет қаралды 7 М.
Removing Links From Two Types of Roller Chains
8:19
Dogg'n Garage
Рет қаралды 166 М.
Part 4 attaching the chain sliding gate opener SL600AC
13:37
Rob Here Trev2323
Рет қаралды 53 М.
DIY Busted Gate Roller Chain Temporary Fix
3:46
The Carpe Diem Life
Рет қаралды 13 М.
Eagle-1000 Gate Operator
2:44
Yossi Afriat
Рет қаралды 90 М.
The Proper way to install a sliding gate motor
12:31
Automatic Gates Explained
Рет қаралды 185 М.
Eagle Gate Operator with Limit Switch Cam Issues
12:15
Phong Vu
Рет қаралды 20 М.
When A Gang Leader Confronted Muhammad Ali
11:43
Boxing After Dark
Рет қаралды 7 МЛН
Before VS during the CONCERT 🔥 "Aliby" | Andra Gogan
00:13
Andra Gogan
Рет қаралды 8 МЛН