Sailrite® 1" Swing‑Away Binder Demo

[@JaniceMarshall-ld4wt]

I just purchased the 2" swing away binder.. I am super excited to use it as I make Calf coats and have been folding and trimming my calf coats all by hand.. this should make my job so much easier.. I look forward to testing it shortly.. It just came in the Mail.. only 2 days wait coming to canada from Indiana.. Super service.. thank you .. and to Erik Grant, the video voice and guide.. Great job.. thank you, you are so easy to listen to and to understand your instructions.. all the best.. off to the sewing room for me..

[@victorjbarker]

Sailrite products and support are second to none!

[@SailriteDIY]

Thank you so much for your kind words! We take pride in providing top-notch products and support to our customers.

[@garygerard4290]

every video I've seen on Sailrite is excellent very well explained with great camera & editing work thank you

[@CaptainBobSVChimera]

An older video but super helpful, I knew there was a secret to sewing binding with inside curves. 😊

[@SailriteDIY]

I appreciate your kind words and that you found the video useful!

[@jonwilmot5331]

You've just solved all my problems. Thanks.

[@garygerard4290]

o hell, I use to spend all my $ on girls-cars-bikes and drink now it all goes to Sailrite

[@gpgp0987]

does this work on any industrial sewing machine? i have the Juki DDL-8700

[@SailriteDIY]

Yes, it does.

[@1goddarddr]

How can I turn 90 degree corner using this binder?

[@tanishqjain1201]

Sir binder mein piping nikalne per curves kyu aati hai

[@dewdana]

When I try this with 3/4” binder & 3/4 polyester herringbone binding it will start ok but eventually it ends up folded unevenly with the bottom side getting more than half the binding & the top half getting less than half & eventually the needle will miss the top side. I’m getting the fabric assembly all the way in so that’s not an issue. What am I doing wrong?

[@SailriteDIY]

Would you please email me more details? I would like to know the part number of the binding you are using. Also I need to see which binder you purchased from Sailrite. Can you send a photo of the binder to me? email me at [e-mail]

[@johurd-fd8uy]

can you feed auto carpet thru this

[@suzanx]

Does this require any special plate or feed dog like other attachments do?

[@SailriteDIY]

No, it does not need a special needle plate or feed dog.

[@ghmvanderveen]

Where to buy in Holland?

[@pansteve]

can it used on juki industrial sewing machine?

[@SailriteDIY]

Yes, it can.

[@pansteve]

@@SailriteDIY how can i buy from hong kong

[@jthis20]

Got any tips on tension settings when using binder attachment? My test piece (marine canvas, v92, #20 needle) looks great. Then get loose and skipped stitches on bottom side, even with top tension maxed out.

[@SailriteDIY]

I find that the center foot is typically not raising up enough when that happens. If you need help with that task email [e-mail] and ask for the video on adjusting the presser feet height.

[@Lifeisbeautiful-q6x]

This tool work for vinyl?

[@SailriteDIY]

Yes, it will sew vinyl coated fabric bindings like Stamoid or Weblon Binding.

[@anthonykenney1812]

Will this fit a Juki DNU 1541s?

[@hectoraguilar3902]

Quisiera una máquina de tapa costura doble aguja tienen ?

[@mercedesmarroquin5435]

Yo necesito un folder para una maquina doble transporte para hacer baidin con sombrela y staimol

[@carakintz3536]

Will it work with heavy duty nylon webbing? Most of my outdoor gear needs binding heavier than the typical binding

[@SailriteDIY]

It is hard to say, since I am not sure of the hand and thickness of the webbing you are using. You can send a sample to me for testing if you like. If you do send about 2 feet and send attention to Eric Grant.

[@ManchesterFC7]

What type of binding material is this?

[@SailriteDIY]

This is Sunbrella Binding which can be found at this link: www.sailrite.com/Notions/Trims/Bindings/Brand/Sunbrella/type/Products?order=custitem_popularity

[@genaroruizluna7818]

Hola soy Genaro y aficionado a la tapicería. Su canal es muy bueno muy explícito todo de maravilla. En lo personal un inconveniente me gustaría q le pusieran subtitulos en español. Para los q nó hablamos INGLES. Una disculpa por mi peticion. Hásta pronto. Gracias

[@SailriteDIY]

Puedes hacerlo ahora. Para cambiar los subtítulos cerrados automáticos que KZbin genera a otro idioma, todo lo que necesita hacer es activar CC y hacer clic en Configuración / Subtítulos / CC, luego hacer clic en traducir automáticamente y seleccionar su idioma.

[@genaroruizluna7818]

@@SailriteDIY Hola buen día. Les agradezco su atencion y orientarme para ver los subtitulos. No lo sabía muchas gracias y hásta pronto desde oaxaca, oax. México

[@bobohler2717]

From a comment asked earlier... Is there a method for turning a 90 degree turn with the binder and binding? Thanks! Bob O. Poppa Bob's Canvas

[@SailriteDIY]

It is rather difficult to turn 90 degrees with a straight angle binder and stiff binding. It is easier to do that with a right angle binder, which we do not sell.

[@MichaelChylinski]

Can I use one with a Bernita u30 record with standard fabrics and 1/2 double food bias tape?

[@SailriteDIY]

I do not think your sewing machine has two threaded holes to the right of the needle plate. If it does not, then it will not work, sorry.

[@marcelkolena4045]

Please this is cordura 1000 d ?

[@niceemporium6066]

I want this

[@SailriteDIY]

You can get it here: www.sailrite.com/Binder-1-Swing-Bracket

[@SammieOne1]

Thank you for the videos -- on a side note, I bought a remnant of the blue corded type fabric you used in this video and looking for more .... Do you carry the particular fabric or if not can tell me what it is called? thank you!!

[@SailriteDIY]

Here is the fabric we used: www.sailrite.com/Sunbrella-4653-0000-Mediterranean-Tweed-46

[@SammieOne1]

@@SailriteDIY you are awesome .. thank you!!

[@embeaston]

Hey there! Do you sell a binder for a machine that has a top load bobbin? My swing away doesn’t line up with my top load machine because of the bobbin plate. Thanks!

[@SailriteDIY]

Sorry, we do not. Typically a top load bobbin has a slide plate that must be drilled and tapped for 6-30 threads for attachments.

[@senenmontes6650]

How to order ?

[@SailriteDIY]

Find it here: www.sailrite.com/Binder-1-Swing-Bracket

[@jossyhunter7325]

I need one !

[@SailriteDIY]

You can get one here: www.sailrite.com/Binder-1-Swing-Bracket

[@patstasiak3537]

Does it work with smaller binding?

[@SailriteDIY]

It will work with 7/8" but nothing smaller. See this video to see it work with 7/8" binding: kzbin.info/www/bejne/jaa6apaQiMaBapI

[@fh7379]

Hello How can I get and from where?

[@SailriteDIY]

Hi, You can purchase it here: www.sailrite.com/Binder-1-Swing-Bracket

[@navnath6679]

Binder rs plz

[@bangbangtangahwei]

It will make my life better lol

[@johnq.public2621]

:)